Welcome!

News Feed Item

ESYINK Offers Lowest Printing Cost in India

NEW DELHI and CHENNAI, November 23, 2012 /PRNewswire/ --

Printing is no More Expensive! Promise by ESYINK

India is one of the largest market for computers and peripheral products. The printer market size is around 3 million units in India. Unlike other countries, the printer market is not growing in India due to the cartridge cost that is unaffordable for the common people. Most of the time, Indian consumers resort to poor quality ink refills due to the higher cost of cartridges.

     (Photo: http://photos.prnewswire.com/prnh/20121122/577950)

ESYINK, the largest ink manufacturer and supplier in Malaysia, are expanding their expertise and technologies to India to address the major concern of ink printing cost in India.

With this, Indian consumers can enjoy the benefit of highly economical and efficient ink systems that can bring down the cost of printing like never before, be it in office, universities or homes.

Mr. P.J. Yeo, Executive Director of ESYINK, Malaysia, who was speaking to the media, during the launch event in Chennai, said, "These new CISS (Continuous Ink Supply System) is going to make revolution in Indian market, particularly in colour printing segment. With this system, colour printing will be very affordable for homes and offices. This will scale up the Inkjet printer sales in India and growth will be remarkable. ESYINK had developed finest micro ink for Inkjet printers particularly for Canon Printers. With this high quality, photo printing and document printing can be done at very affordable cost. ESYINK will sell only Canon compatible CISS in India since it's successfully proven in Malaysia and other countries. ESYINK expects one million units of CISS at the end of 2015 from India."

As per Ms. Sujatha Dilip, Director of ACE Technologies, who are the National Distributors for ESYINK India, "The key focus would be bringing these products to all cities and towns in India. She expects optimum market coverage by end of March 2013. Inkjet Printer with ESYINK combo will be available for Rs. 2999 across the country from authorised retail outlets from December 2012 onwards. This combo will offer 5000 prints (B&W and Colour combo) and this will be the lowest priced Printer with high yield of printing in the country."

"ESYINK in India is ready to take the challenge to meet the expectations of Indian consumers. It offers CISS solutions for five models and also offers affordable high quality photo papers in India," added Mr. P.J Yeo.

About ESYINK:

ESYINK is developed and promoted by Pineapple Resources Berhad (formerly known as Discomp Berhad) based in Kuala Lumpur. They ventured into R&D of INK technology in early 90s and today are the leading ink manufacturer in Malaysia. PRB is a listed company in ACE Market of the Bursa Malaysia Securities. For more information, visit http://www.esy-ink.com.my.

Primary Media Contact: Ms. Manomi, [email protected], +91-98416 07424

More Stories By PR Newswire

Copyright © 2007 PR Newswire. All rights reserved. Republication or redistribution of PRNewswire content is expressly prohibited without the prior written consent of PRNewswire. PRNewswire shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon.

Latest Stories
"We are an all-flash array storage provider but our focus has been on VM-aware storage specifically for virtualized applications," stated Dhiraj Sehgal of Tintri in this SYS-CON.tv interview at 19th Cloud Expo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
"We are a leader in the market space called network visibility solutions - it enables monitoring tools and Big Data analysis to access the data and be able to see the performance," explained Shay Morag, VP of Sales and Marketing at Niagara Networks, in this SYS-CON.tv interview at 19th Cloud Expo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
Whether your IoT service is connecting cars, homes, appliances, wearable, cameras or other devices, one question hangs in the balance – how do you actually make money from this service? The ability to turn your IoT service into profit requires the ability to create a monetization strategy that is flexible, scalable and working for you in real-time. It must be a transparent, smoothly implemented strategy that all stakeholders – from customers to the board – will be able to understand and comprehe...
More and more brands have jumped on the IoT bandwagon. We have an excess of wearables – activity trackers, smartwatches, smart glasses and sneakers, and more that track seemingly endless datapoints. However, most consumers have no idea what “IoT” means. Creating more wearables that track data shouldn't be the aim of brands; delivering meaningful, tangible relevance to their users should be. We're in a period in which the IoT pendulum is still swinging. Initially, it swung toward "smart for smart...
Complete Internet of Things (IoT) embedded device security is not just about the device but involves the entire product’s identity, data and control integrity, and services traversing the cloud. A device can no longer be looked at as an island; it is a part of a system. In fact, given the cross-domain interactions enabled by IoT it could be a part of many systems. Also, depending on where the device is deployed, for example, in the office building versus a factory floor or oil field, security ha...
An IoT product’s log files speak volumes about what’s happening with your products in the field, pinpointing current and potential issues, and enabling you to predict failures and save millions of dollars in inventory. But until recently, no one knew how to listen. In his session at @ThingsExpo, Dan Gettens, Chief Research Officer at OnProcess, discussed recent research by Massachusetts Institute of Technology and OnProcess Technology, where MIT created a new, breakthrough analytics model for s...
In IT, we sometimes coin terms for things before we know exactly what they are and how they’ll be used. The resulting terms may capture a common set of aspirations and goals – as “cloud” did broadly for on-demand, self-service, and flexible computing. But such a term can also lump together diverse and even competing practices, technologies, and priorities to the point where important distinctions are glossed over and lost.
SYS-CON Events has announced today that Roger Strukhoff has been named conference chair of Cloud Expo and @ThingsExpo 2017 New York. The 20th Cloud Expo and 7th @ThingsExpo will take place on June 6-8, 2017, at the Javits Center in New York City, NY. "The Internet of Things brings trillions of dollars of opportunity to developers and enterprise IT, no matter how you measure it," stated Roger Strukhoff. "More importantly, it leverages the power of devices and the Internet to enable us all to im...
"We are the public cloud providers. We are currently providing 50% of the resources they need for doing e-commerce business in China and we are hosting about 60% of mobile gaming in China," explained Yi Zheng, CPO and VP of Engineering at CDS Global Cloud, in this SYS-CON.tv interview at 19th Cloud Expo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
"We are a custom software development, engineering firm. We specialize in cloud applications from helping customers that have on-premise applications migrating to the cloud, to helping customers design brand new apps in the cloud. And we specialize in mobile apps," explained Peter Di Stefano, Vice President of Marketing at Impiger Technologies, in this SYS-CON.tv interview at 19th Cloud Expo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
When it comes to cloud computing, the ability to turn massive amounts of compute cores on and off on demand sounds attractive to IT staff, who need to manage peaks and valleys in user activity. With cloud bursting, the majority of the data can stay on premises while tapping into compute from public cloud providers, reducing risk and minimizing need to move large files. In his session at 18th Cloud Expo, Scott Jeschonek, Director of Product Management at Avere Systems, discussed the IT and busin...
Data is the fuel that drives the machine learning algorithmic engines and ultimately provides the business value. In his session at 20th Cloud Expo, Ed Featherston, director/senior enterprise architect at Collaborative Consulting, will discuss the key considerations around quality, volume, timeliness, and pedigree that must be dealt with in order to properly fuel that engine.
In his general session at 19th Cloud Expo, Manish Dixit, VP of Product and Engineering at Dice, discussed how Dice leverages data insights and tools to help both tech professionals and recruiters better understand how skills relate to each other and which skills are in high demand using interactive visualizations and salary indicator tools to maximize earning potential. Manish Dixit is VP of Product and Engineering at Dice. As the leader of the Product, Engineering and Data Sciences team at D...
What happens when the different parts of a vehicle become smarter than the vehicle itself? As we move toward the era of smart everything, hundreds of entities in a vehicle that communicate with each other, the vehicle and external systems create a need for identity orchestration so that all entities work as a conglomerate. Much like an orchestra without a conductor, without the ability to secure, control, and connect the link between a vehicle’s head unit, devices, and systems and to manage the ...
Financial Technology has become a topic of intense interest throughout the cloud developer and enterprise IT communities. Accordingly, attendees at the upcoming 20th Cloud Expo at the Javits Center in New York, June 6-8, 2017, will find fresh new content in a new track called FinTech.