Welcome!

Blog Feed Post

S3 Encryption With Porticor

Your Porticor appliance can encrypt data being stored to Amazon’s Simple Storage Service (S3). Porticor is the only system available that offers the convenience of cloud-based hosted key management without sacrificing trust by requiring someone else to manage the keys. Porticor’s split-key encryption technology protects keys and guarantees they remain under customer control and are never exposed in storage; and with homomorphic key encryption, the keys are protected – even while they are in use.

A variety of applications use S3 to store bulk data, and we support two different ways of enabling Porticor encryption with them.

  1. The first and recommended alternative is to configure the application so that data is written to and read from the Porticor appliance.
  2. Where this is not an option, you can instead configure host-to-IP mapping so that the application writing to s3.amazonaws.com actually writes to the appliance, which encrypts and forwards the data to S3.

These are two options to set up your environment, but the end result is one and the same: your data is encrypted when written to S3 and decrypted when reading from it, with no need to change the client application.

What follows are detailed instructions for both configuration options.

Alternative 1: Explicit Configuration

This alternative depends on the individual application. In fact some S3 clients are hardwired to the Amazon server addresses and cannot be configured. For these clients you must use Alternative 2.

In this alternative you configure the S3 client to connect to a special DNS address for each of your buckets and for the main S3 endpoint. These DNS addresses are installed automatically when you add your S3 “buckets” into the table on the S3 Encryption page. All buckets that are to be encrypted must be listed. If your bucket is called mylittlebucket, it will be mapped to the DNS name mylittlebucket.d.porticor.net.

The specific client configuration depends on the particular client. Following are two examples.

Configuring s3cmd

Edit the file $HOME/.s3cfg, and replace the host_base and host_bucket lines as below, where the long host_base value is your appliance’s address.

# old:
# host_base = s3.amazonaws.com
# host_bucket = %(bucket)s.s3.amazonaws.com

# new:
host_base = itbetb19zy3-pzjy3yty2zw.d.porticor.net
host_bucket = %(bucket)s.d.porticor.net

Configuring S3QL

Edit $HOME/.s3ql/authinfo2, and add a new section:

[porticor]
storage-url: s3c://itbetb19zy3-pzjy3yty2zw.d.porticor.net/bucket-name/
backend-login: aws-key-id
backend-password: aws-secret-key

To create the file system, run:

mkfs.s3ql --plain --ssl s3://bucket-name/

mount.s3ql --ssl s3://bucket-name /mnt/cloud-drive

Note the use of the “s3c” URL method. Both the --ssl and --plain flags are mandatory.

Alternative 2: Host Mapping

With this alternative you configure the host on which your S3 client is running, so that s3.amazonaws.com and bucketname.s3.amazonaws.com are resolved to the IP address of the Porticor appliance. You should not fill in the Bucket table in this alternative.
On Linux, edit the file /etc/hosts and add the lines shown below.
On Windows, add these lines to %windir%\system32\drivers\etc\lmhosts (or ...\hosts, depending on your Windows version).

Appliance-IP bucketname.s3.amazonaws.com # replicate this line for each S3 bucket
Appliance-IP s3.amazonaws.com

Use the so-called “private” IP address (10.x.x.x) of the Porticor appliance, for access from within the EC2 cloud. If you plan to access the appliance from outside the cloud or even from another AWS region you will need to use “public” address instead. Both addresses are listed in the S3 Configuration GUI page.
All communication with the virtual appliance is SSL-protected. In Alternative 2, you should make sure that your project’s CA certificate is installed on the client machine, otherwise your S3 client might refuse to connect.

Additional Notes

  • You need to wait a few minutes after the creation of a new bucket before starting to use it, so that it is recognized by all S3 servers.
  • Note that Porticor does not support “mixed buckets” containing both protected and unprotected objects.
  • Bucket names must conform with the requirements for DNS names, as recommended by Amazon Web Services. In particular they must not contain uppercase letters.

The post S3 Encryption With Porticor appeared first on Porticor Cloud Security.

Read the original blog entry...

More Stories By Gilad Parann-Nissany

Gilad Parann-Nissany, Founder and CEO at Porticor is a pioneer of Cloud Computing. He has built SaaS Clouds for medium and small enterprises at SAP (CTO Small Business); contributing to several SAP products and reaching more than 8 million users. Recently he has created a consumer Cloud at G.ho.st - a cloud operating system that delighted hundreds of thousands of users while providing browser-based and mobile access to data, people and a variety of cloud-based applications. He is now CEO of Porticor, a leader in Virtual Privacy and Cloud Security.

Latest Stories
Due of the rise of Hadoop, many enterprises are now deploying their first small clusters of 10 to 20 servers. At this small scale, the complexity of operating the cluster looks and feels like general data center servers. It is not until the clusters scale, as they inevitably do, when the pain caused by the exponential complexity becomes apparent. We've seen this problem occur time and time again. In his session at Big Data Expo, Greg Bruno, Vice President of Engineering and co-founder of StackIQ...
The security needs of IoT environments require a strong, proven approach to maintain security, trust and privacy in their ecosystem. Assurance and protection of device identity, secure data encryption and authentication are the key security challenges organizations are trying to address when integrating IoT devices. This holds true for IoT applications in a wide range of industries, for example, healthcare, consumer devices, and manufacturing. In his session at @ThingsExpo, Lancen LaChance, vic...
"Plutora provides release and testing environment capabilities to the enterprise," explained Dalibor Siroky, Director and Co-founder of Plutora, in this SYS-CON.tv interview at @DevOpsSummit, held June 9-11, 2015, at the Javits Center in New York City.
FinTech is the sum of financial and technology, and it’s one of the fastest growing tech industries. Total global investments in FinTech almost reached $50 billion last year, but there is still a great deal of confusion over what it is and what it means – especially as it applies to retirement. Building financial startups is not simple, but with the right team, technology and an innovative approach it can be an extremely interesting domain to disrupt. FinTech heralds a financial revolution that...
In his session at DevOps Summit, Tapabrata Pal, Director of Enterprise Architecture at Capital One, will tell a story about how Capital One has embraced Agile and DevOps Security practices across the Enterprise – driven by Enterprise Architecture; bringing in Development, Operations and Information Security organizations together. Capital Ones DevOpsSec practice is based upon three "pillars" – Shift-Left, Automate Everything, Dashboard Everything. Within about three years, from 100% waterfall, C...
With major technology companies and startups seriously embracing IoT strategies, now is the perfect time to attend @ThingsExpo 2016 in New York. Learn what is going on, contribute to the discussions, and ensure that your enterprise is as "IoT-Ready" as it can be! Internet of @ThingsExpo, taking place June 6-8, 2017, at the Javits Center in New York City, New York, is co-located with 20th Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry p...
SYS-CON Media announced today that @WebRTCSummit Blog, the largest WebRTC resource in the world, has been launched. @WebRTCSummit Blog offers top articles, news stories, and blog posts from the world's well-known experts and guarantees better exposure for its authors than any other publication. @WebRTCSummit Blog can be bookmarked ▸ Here @WebRTCSummit conference site can be bookmarked ▸ Here
SYS-CON Events announced today that Addteq will exhibit at SYS-CON's @DevOpsSummit at Cloud Expo New York, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Addteq is one of the top 10 Platinum Atlassian Experts who specialize in DevOps, custom and continuous integration, automation, plugin development, and consulting for midsize and global firms. Addteq firmly believes that automation is essential for successful software releases. Addteq centers its products an...
In his keynote at @ThingsExpo, Chris Matthieu, Director of IoT Engineering at Citrix and co-founder and CTO of Octoblu, focused on building an IoT platform and company. He provided a behind-the-scenes look at Octoblu’s platform, business, and pivots along the way (including the Citrix acquisition of Octoblu).
SYS-CON Events announced today that IoT Now has been named “Media Sponsor” of SYS-CON's 20th International Cloud Expo, which will take place on June 6–8, 2017, at the Javits Center in New York City, NY. IoT Now explores the evolving opportunities and challenges facing CSPs, and it passes on some lessons learned from those who have taken the first steps in next-gen IoT services.
You think you know what’s in your data. But do you? Most organizations are now aware of the business intelligence represented by their data. Data science stands to take this to a level you never thought of – literally. The techniques of data science, when used with the capabilities of Big Data technologies, can make connections you had not yet imagined, helping you discover new insights and ask new questions of your data. In his session at @ThingsExpo, Sarbjit Sarkaria, data science team lead ...
SYS-CON Events announced today that WineSOFT will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Based in Seoul and Irvine, WineSOFT is an innovative software house focusing on internet infrastructure solutions. The venture started as a bootstrap start-up in 2010 by focusing on making the internet faster and more powerful. WineSOFT’s knowledge is based on the expertise of TCP/IP, VPN, SSL, peer-to-peer, mob...
The Internet of Things can drive efficiency for airlines and airports. In their session at @ThingsExpo, Shyam Varan Nath, Principal Architect with GE, and Sudip Majumder, senior director of development at Oracle, discussed the technical details of the connected airline baggage and related social media solutions. These IoT applications will enhance travelers' journey experience and drive efficiency for the airlines and the airports.
For organizations that have amassed large sums of software complexity, taking a microservices approach is the first step toward DevOps and continuous improvement / development. Integrating system-level analysis with microservices makes it easier to change and add functionality to applications at any time without the increase of risk. Before you start big transformation projects or a cloud migration, make sure these changes won’t take down your entire organization.
Big Data, cloud, analytics, contextual information, wearable tech, sensors, mobility, and WebRTC: together, these advances have created a perfect storm of technologies that are disrupting and transforming classic communications models and ecosystems. In his session at @ThingsExpo, Erik Perotti, Senior Manager of New Ventures on Plantronics’ Innovation team, provided an overview of this technological shift, including associated business and consumer communications impacts, and opportunities it m...