Welcome!

News Feed Item

ColorLock(TM) Color Filter Stacks for Precision Spectral Control With Durability and Wide Angle Performance From Reynard Corporation

SAN CLEMENTE, CA--(Marketwire - January 31, 2013) -  Reynard Corporation has introduced ColorLock™ color filter stacks to their portfolio of innovated optical products. These filters utilize the transmission and blocking characteristics of two or more specialty designed filter glass types to produce a precision optical component with extreme wide-angle performance characteristics. Configurations include Band Pass, Long Wave Pass, Short Wave Pass, and custom arbitrary specifications in the ultra-violet (UV), visible, and near-infrared (NIR) spectral ranges.

The filters are designed using proprietary ColorLock™ software to identify the optical layer thickness prescription and simulate a spectral response. The individual constituents are each fabricated to tight thickness tolerances and then bonded together to eliminate internal boundary Fresnel loss. The stacked filter is then finished with high-precision surface quality, sub-wavelength surface flatness, and minimal transmitted wavefront error.

The result is an optical filter, up to 6-inches in size, which can be utilized over very wide-angles, from 0° to +/-50°, without any spectral shift (a.k.a. 'blue-shift') and negligible loss in transmission. Very wide, out-of-band blocking is achieved by the inherent absorbing characteristic of the glass, achieving blocking densities better than OD10.

"ColorLock™ filter stacks are the only option for instruments requiring pinhole-free, consistent color over very wide viewing angles. They routinely pass the most stringent environmental durability tests such as severe abrasion and salt-fog. Additionally, filters have been tested over MIL-SPEC temperature and humidity ranges, without any signs of degradation or delamination," says Randy Reynard, President of Reynard Corporation.

The applications for ColorLock™ filter stacks are vast; wherever there is a need for color stability and wide-angle imaging such as in machine vision, metrology instruments, and color sensing/correction. The filters can be used for laser safety and blocking, as well as for laser clean-up to remove unwanted harmonics or spurious noise. For fluorescence, these filters can offer high contrast between the peak emission intensity over the excitation intensity. Specific performance values can be customized, or standard values can be defined, such as DAPI, FITC, Alexa Fluor 568, etc.

About Reynard Corporation
Established in 1984, Reynard Corporation designs and manufactures precision thin film optical products for a global customer base, both military and commercial. In-house operation capabilities include design, fabrication, photolithography, coating, and sub-assembly for a one-stop solution. Contact us at [email protected], or visit our webpage for online ordering and reference at www.reynardcorp.com, 949-366-8866.

Image Available: http://www.marketwire.com/library/MwGo/2013/1/31/11G003544/Images/ColorLock_color_filter-1154930282931.jpg

Reynard Corporation
Email contact
949-366-8866

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
What if you could build a web application that could support true web-scale traffic without having to ever provision or manage a single server? Sounds magical, and it is! In his session at 20th Cloud Expo, Chris Munns, Senior Developer Advocate for Serverless Applications at Amazon Web Services, will show how to build a serverless website that scales automatically using services like AWS Lambda, Amazon API Gateway, and Amazon S3. We will review several frameworks that can help you build serverle...
Now that the world has connected “things,” we need to build these devices as truly intelligent in order to create instantaneous and precise results. This means you have to do as much of the processing at the point of entry as you can: at the edge. The killer use cases for IoT are becoming manifest through AI engines on edge devices. An autonomous car has this dual edge/cloud analytics model, producing precise, real-time results. In his session at @ThingsExpo, John Crupi, Vice President and Eng...
In the enterprise today, connected IoT devices are everywhere – both inside and outside corporate environments. The need to identify, manage, control and secure a quickly growing web of connections and outside devices is making the already challenging task of security even more important, and onerous. In his session at @ThingsExpo, Rich Boyer, CISO and Chief Architect for Security at NTT i3, will discuss new ways of thinking and the approaches needed to address the emerging challenges of securit...
The taxi industry never saw Uber coming. Startups are a threat to incumbents like never before, and a major enabler for startups is that they are instantly “cloud ready.” If innovation moves at the pace of IT, then your company is in trouble. Why? Because your data center will not keep up with frenetic pace AWS, Microsoft and Google are rolling out new capabilities In his session at 20th Cloud Expo, Don Browning, VP of Cloud Architecture at Turner, will posit that disruption is inevitable for c...
There are 66 million network cameras capturing terabytes of data. How did factories in Japan improve physical security at the facilities and improve employee productivity? Edge Computing reduces possible kilobytes of data collected per second to only a few kilobytes of data transmitted to the public cloud every day. Data is aggregated and analyzed close to sensors so only intelligent results need to be transmitted to the cloud. Non-essential data is recycled to optimize storage.
SYS-CON Events announced today that Loom Systems will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Founded in 2015, Loom Systems delivers an advanced AI solution to predict and prevent problems in the digital business. Loom stands alone in the industry as an AI analysis platform requiring no prior math knowledge from operators, leveraging the existing staff to succeed in the digital era. With offices in S...
In his General Session at 16th Cloud Expo, David Shacochis, host of The Hybrid IT Files podcast and Vice President at CenturyLink, investigated three key trends of the “gigabit economy" though the story of a Fortune 500 communications company in transformation. Narrating how multi-modal hybrid IT, service automation, and agile delivery all intersect, he will cover the role of storytelling and empathy in achieving strategic alignment between the enterprise and its information technology.
"I think that everyone recognizes that for IoT to really realize its full potential and value that it is about creating ecosystems and marketplaces and that no single vendor is able to support what is required," explained Esmeralda Swartz, VP, Marketing Enterprise and Cloud at Ericsson, in this SYS-CON.tv interview at @ThingsExpo, held June 7-9, 2016, at the Javits Center in New York City, NY.
As businesses adopt functionalities in cloud computing, it’s imperative that IT operations consistently ensure cloud systems work correctly – all of the time, and to their best capabilities. In his session at @BigDataExpo, Bernd Harzog, CEO and founder of OpsDataStore, will present an industry answer to the common question, “Are you running IT operations as efficiently and as cost effectively as you need to?” He will expound on the industry issues he frequently came up against as an analyst, and...
Microservices are a very exciting architectural approach that many organizations are looking to as a way to accelerate innovation. Microservices promise to allow teams to move away from monolithic "ball of mud" systems, but the reality is that, in the vast majority of organizations, different projects and technologies will continue to be developed at different speeds. How to handle the dependencies between these disparate systems with different iteration cycles? Consider the "canoncial problem" ...
Information technology (IT) advances are transforming the way we innovate in business, thereby disrupting the old guard and their predictable status-quo. It’s creating global market turbulence. Industries are converging, and new opportunities and threats are emerging, like never before. So, how are savvy chief information officers (CIOs) leading this transition? Back in 2015, the IBM Institute for Business Value conducted a market study that included the findings from over 1,800 CIO interviews ...
SYS-CON Events announced today that HTBase will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. HTBase (Gartner 2016 Cool Vendor) delivers a Composable IT infrastructure solution architected for agility and increased efficiency. It turns compute, storage, and fabric into fluid pools of resources that are easily composed and re-composed to meet each application’s needs. With HTBase, companies can quickly prov...
Keeping pace with advancements in software delivery processes and tooling is taxing even for the most proficient organizations. Point tools, platforms, open source and the increasing adoption of private and public cloud services requires strong engineering rigor - all in the face of developer demands to use the tools of choice. As Agile has settled in as a mainstream practice, now DevOps has emerged as the next wave to improve software delivery speed and output. To make DevOps work, organization...
SYS-CON Events announced today that SoftLayer, an IBM Company, has been named “Gold Sponsor” of SYS-CON's 18th Cloud Expo, which will take place on June 7-9, 2016, at the Javits Center in New York, New York. SoftLayer, an IBM Company, provides cloud infrastructure as a service from a growing number of data centers and network points of presence around the world. SoftLayer’s customers range from Web startups to global enterprises.
China Unicom exhibit at the 19th International Cloud Expo, which took place at the Santa Clara Convention Center in Santa Clara, CA, in November 2016. China United Network Communications Group Co. Ltd ("China Unicom") was officially established in 2009 on the basis of the merger of former China Netcom and former China Unicom. China Unicom mainly operates a full range of telecommunications services including mobile broadband (GSM, WCDMA, LTE FDD, TD-LTE), fixed-line broadband, ICT, data communica...