Welcome!

News Feed Item

InvenSense® Unveils World’s Lowest Profile 3-Axis Gyroscope for MotionTracking Applications

InvenSense, Inc. (NYSE:INVN), the leading provider of MotionTracking devices, announced the world’s lowest profile and lowest power 3-axis MEMS gyroscope designed for Smartphones, Tablets, Smart TVs, and Gaming devices. The trend toward thinner devices in the consumer electronics market has created demand for components with a maximum height of 0.8mm to allow flexible board placement. Low profile components also offer the advantage of allowing for thicker batteries with extended operating time. The ITG-3501, with an industry first 0.75mm height and lowest power consumption of only 5.9mW (3.3mA at 1.8V), leads the industry on both fronts to enable next-generation mobile devices. The 5th generation InvenSense MEMS gyroscope in ITG-3501, is the key factor in achieving the power, low profile and outstanding noise performance of only 0.1º/s/√Hz.

“Our patented fabrication process and innovative single-structure MEMS design enables us to integrate multiple sensors and reduce the size and profile in every category of Motion-Sensors. The combination of 17% lower profile and 44% smaller footprint compared to our previous generation ITG-3050 family also puts us firmly in the lead for 3-Axis gyroscopes,” said Ali Foughi, Vice President of Marketing and Business Development at InvenSense. “According to Yole Développement, the total Gyroscope market is estimated to reach over 800 million units in 2014, and our ITG-3501 is positioned well to serve this large market.”

The ITG-3501 has options for full scale ranges of ±250dps, ±500dps, ±1000dps, and ±2,000dps making it suitable for a wide range of consumer electronics applications. Its unrivaled small size and unprecedented low power enables emerging applications such as Motion Interface, gesture control, and location-based services. The integrated Self-Test and offset temperature compensation deliver ease of integration and consistent performance. The gyroscope operates at a single nominal resonant frequency of 27 kHz making the ITG-3501 immune to interference from audible frequencies (20-20,000Hz) such as music, ringtones, crowds and white noise. Other industry-leading features include the 3x3x0.75mm plastic 16-pin QFN package, on-chip16-bit ADCs, built-in FIFO, programmable digital filters, a precision clock with 2% accuracy over -40°C to 85°C, an embedded temperature sensor, and programmable interrupts. Parts are available with I2C and high-speed 20 MHz read-capable SPI serial interfaces, along with a flexible VDD operating range of 1.71V to 3.6V.

The ITG-3501 is sampling to selected customers in Q2 2013. For more information please visit our website at www.invensense.com or contact InvenSense Sales at [email protected].

About InvenSense

InvenSense Inc. (NYSE:INVN) is the world’s leading provider of MotionTracking solutions for consumer electronic devices. The company’s patented NF Platform and patent-pending MotionFusion technology address the emerging needs of many mass-market consumer applications via improved performance, accuracy, and intuitive motion- and gesture-based interfaces. InvenSense technology can be found in consumer electronic products including smartphones, tablets, gaming devices, optical image stabilization, and remote controls for Smart TVs. The company’s MotionTracking products are also being integrated into a number of industrial applications. InvenSense is headquartered in Sunnyvale, California and has offices in China, Taiwan, Korea, Japan, and Dubai. More information can be found at www.invensense.com.

©2013 InvenSense, Inc. All rights reserved. InvenSense, MotionTracking, MotionProcessing, MotionProcessor, MotionFusion, MotionApps, DMP, and the InvenSense logo are trademarks of InvenSense, Inc. Other company and product names may be trademarks of the respective companies with which they are associated.

More Stories By Business Wire

Copyright © 2009 Business Wire. All rights reserved. Republication or redistribution of Business Wire content is expressly prohibited without the prior written consent of Business Wire. Business Wire shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon.

Latest Stories
Traditional IT, great for stable systems of record, is struggling to cope with newer, agile systems of engagement requirements coming straight from the business. In his session at 18th Cloud Expo, William Morrish, General Manager of Product Sales at Interoute, outlined ways of exploiting new architectures to enable both systems and building them to support your existing platforms, with an eye for the future. Technologies such as Docker and the hyper-convergence of computing, networking and sto...
Whether your IoT service is connecting cars, homes, appliances, wearable, cameras or other devices, one question hangs in the balance – how do you actually make money from this service? The ability to turn your IoT service into profit requires the ability to create a monetization strategy that is flexible, scalable and working for you in real-time. It must be a transparent, smoothly implemented strategy that all stakeholders – from customers to the board – will be able to understand and comprehe...
SYS-CON Events announced today that LeaseWeb USA, a cloud Infrastructure-as-a-Service (IaaS) provider, will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. LeaseWeb is one of the world's largest hosting brands. The company helps customers define, develop and deploy IT infrastructure tailored to their exact business needs, by combining various kinds cloud solutions.
The cloud market growth today is largely in public clouds. While there is a lot of spend in IT departments in virtualization, these aren’t yet translating into a true “cloud” experience within the enterprise. What is stopping the growth of the “private cloud” market? In his general session at 18th Cloud Expo, Nara Rajagopalan, CEO of Accelerite, explored the challenges in deploying, managing, and getting adoption for a private cloud within an enterprise. What are the key differences between wh...
Using new techniques of information modeling, indexing, and processing, new cloud-based systems can support cloud-based workloads previously not possible for high-throughput insurance, banking, and case-based applications. In his session at 18th Cloud Expo, John Newton, CTO, Founder and Chairman of Alfresco, described how to scale cloud-based content management repositories to store, manage, and retrieve billions of documents and related information with fast and linear scalability. He addres...
Adding public cloud resources to an existing application can be a daunting process. The tools that you currently use to manage the software and hardware outside the cloud aren’t always the best tools to efficiently grow into the cloud. All of the major configuration management tools have cloud orchestration plugins that can be leveraged, but there are also cloud-native tools that can dramatically improve the efficiency of managing your application lifecycle. In his session at 18th Cloud Expo, ...
It’s 2016: buildings are smart, connected and the IoT is fundamentally altering how control and operating systems work and speak to each other. Platforms across the enterprise are networked via inexpensive sensors to collect massive amounts of data for analytics, information management, and insights that can be used to continuously improve operations. In his session at @ThingsExpo, Brian Chemel, Co-Founder and CTO of Digital Lumens, will explore: The benefits sensor-networked systems bring to ...
Much of IT terminology is often misused and misapplied. Modernization and transformation are two such terms. They are often used interchangeably even though they mean different things and have very different connotations. Indeed, it is somewhat safe to assume that in IT any transformative effort is likely to also have a modernizing effect, and thus, we can see these as levels of improvement efforts. However, many businesses are being led to believe if they don’t transform now they risk becoming ...
SYS-CON Events announced today the Enterprise IoT Bootcamp, being held November 1-2, 2016, in conjunction with 19th Cloud Expo | @ThingsExpo at the Santa Clara Convention Center in Santa Clara, CA. Combined with real-world scenarios and use cases, the Enterprise IoT Bootcamp is not just based on presentations but with hands-on demos and detailed walkthroughs. We will introduce you to a variety of real world use cases prototyped using Arduino, Raspberry Pi, BeagleBone, Spark, and Intel Edison. Y...
When building large, cloud-based applications that operate at a high scale, it’s important to maintain a high availability and resilience to failures. In order to do that, you must be tolerant of failures, even in light of failures in other areas of your application. “Fly two mistakes high” is an old adage in the radio control airplane hobby. It means, fly high enough so that if you make a mistake, you can continue flying with room to still make mistakes. In his session at 18th Cloud Expo, Lee...
Large scale deployments present unique planning challenges, system commissioning hurdles between IT and OT and demand careful system hand-off orchestration. In his session at @ThingsExpo, Jeff Smith, Senior Director and a founding member of Incenergy, will discuss some of the key tactics to ensure delivery success based on his experience of the last two years deploying Industrial IoT systems across four continents.
SYS-CON Events announced today that Venafi, the Immune System for the Internet™ and the leading provider of Next Generation Trust Protection, will exhibit at @DevOpsSummit at 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Venafi is the Immune System for the Internet™ that protects the foundation of all cybersecurity – cryptographic keys and digital certificates – so they can’t be misused by bad guys in attacks...
Identity is in everything and customers are looking to their providers to ensure the security of their identities, transactions and data. With the increased reliance on cloud-based services, service providers must build security and trust into their offerings, adding value to customers and improving the user experience. Making identity, security and privacy easy for customers provides a unique advantage over the competition.
Whether your IoT service is connecting cars, homes, appliances, wearable, cameras or other devices, one question hangs in the balance – how do you actually make money from this service? The ability to turn your IoT service into profit requires the ability to create a monetization strategy that is flexible, scalable and working for you in real-time. It must be a transparent, smoothly implemented strategy that all stakeholders – from customers to the board – will be able to understand and comprehe...
"Tintri was started in 2008 with the express purpose of building a storage appliance that is ideal for virtualized environments. We support a lot of different hypervisor platforms from VMware to OpenStack to Hyper-V," explained Dan Florea, Director of Product Management at Tintri, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.