News Feed Item

Global-Recycling-Equipment.com Company Inc. Joins with Shredderhotline.com Company Inc.

CHICAGO, Feb. 26, 2013 /PRNewswire/ -- The global recycling equipment group owned by the Burda family has renewed effort for mini shredding systems for under 1 million with many designs in the $250,000 range for the recycling industry.

Data shown on the website www.industrialshredder.com shows may layouts for a multi shred system with a dual wash line that can provide a MULT function use to shred plastic and other waste materials in large volumes with a wash line to clean dirty material for upgrade.

The need in the industry for more automated lines to take bales of scrap metal and plastic and shred for upgrade or in the case of plastic wash the material for further processing and upgrade needs.

The concept designed by the Burda Group in 1970 is to take bales of material or even bulky items such as tires, pallets, fridges, stoves, and shred for volume reduction and upgrade. The need for many items such as plastic must be washed to ensure proper upgrade for the world market.

We have found that if materials are not shredder or shredded and washed then the final end product can not be resold or accepted by China or other countries.

On our website www.globalrecyclingequipment.com shows data on the pender design and pictures of this design for shredding scrap metal to a frag form using a shear shredder and a vertical densifier.

This data on the website www.industrialshredder.com shows more detail on the layout needed for plastic bale shredding or bulky material shredding where wash is needed.

The industry should start to understand that industrial shredding systems are not all large but in most cases they are larger than most people understand.

Small shredders have a place in our industry but large shredders are often needed to take the place of a small shredder to endure the duty cycle or the shredding application of the task.

The pictures on the website www.shredderhotline.com and many of the Burda Group company sites show layouts of shredder and rasper designs that have been installed around the world including the US Army and US Air Force for the shredding tires in Iraq to a wire free recycled form.

The systems offered in our data sheets shown on the website www.industrialshredder.com involve designs using a single and dual shredder layout with or without wash lines.

Most shredding of scrap metal is processed into a fist size chunk and allow the removal of contaminants and other items such as rocks and dirt and grit.

The dual shred line 3D layout is shown at www.eidal-kubota.com and also at www.chinashredder.com in multiple configurations where the primary shredder is fed in a horizontal or vertical mode.

The mode of feeding will vary but this standard design for feeding can change from a horizontal mode feed system for the primary shredder to a vertical mode for the primary or secondary shredder.

The pictures of the system shown on the website www.industrialshredder.com outline some of the variations of a horizontal feed system for plastic pipe processing and bulk plastic bale processing or even carpet shredding and mattress shredding for recycling of these materials.

The pictures on the website www.globalrecyclingequipment.com show a triple shred line for e waste for metal and plastic recovery.

Shredders are not expensive if you find the right company and shredders of the past are not the same as the shredders made today by group such as ours with patented low hp high torque designs.

The core shredder in the the Edal Kubota shredding system has an infeed opening of 2 meters by 2 meters for bulky items.

Shredders like these are all over the world.

They are called slow speed shear type shredders.

Other designs of shredders are called raspers.

Other designs of shredders are called single shaft grinders.

Other designs of shredders are called vertical grinders.

The shredderhotline.com company makes all types of shredders and does not offer just one design but multiple designs and machines to handle the task of shredding.

No one machine can do it all.

Everyone that make shredders must have a diversified shredder family in their design packages.

The only difference is that most shredder groups do not have multiple lines to offer.

That limits the selection for clients.

Today most groups in the industry who purchase a shredder have bought the first shredder that they feel works well for their application.

Most do not understand that their selection may be wrong.

Most groups do not understand linear design systems.

Most shredding systems bought today are not using the best design.

The base shredder today for many applications should have an large infeed opening to grab bales or slugs of material.

The layout of the typical shredder is shown clearly on our website www.industrialshredder.com.

Most industrial shredders are the size of a school bus.

If they are not that big then they may not be an industrial shredder.

Be careful in your selection of low cost shredders and do not think that you have to buy a machine from China to get a low cost shredder.

There are many low cost shredders made in the USA and Europe by our group and others.

Look around and check things out.

The design of all shredding systems are refined during the engineering stage but the concept and data of design is based on the layout data in our website at www.shredderhotline.com.

All layouts of a two shredder system is shown in our data.

As outlined above, the base system needed in the waste industry is typically comprised of two shredders to slice and dice material and often involves wash tanks when plastic is involved.

We design systems as a modular form in concept and is comprised of many sub components for shredding.

Once again the shredding process used in todays world uses a primary shredder to open up the bales of material.

Another system to watch in the new decade of shredders is our design to shred white goods into a frag form.

See what we offer at www.industrialshredder.com\

Shredderhotline.Com Company
Dan Burda


More Stories By PR Newswire

Copyright © 2007 PR Newswire. All rights reserved. Republication or redistribution of PRNewswire content is expressly prohibited without the prior written consent of PRNewswire. PRNewswire shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon.

Latest Stories
DXWorldEXPO LLC announced today that Kevin Jackson joined the faculty of CloudEXPO's "10-Year Anniversary Event" which will take place on November 11-13, 2018 in New York City. Kevin L. Jackson is a globally recognized cloud computing expert and Founder/Author of the award winning "Cloud Musings" blog. Mr. Jackson has also been recognized as a "Top 100 Cybersecurity Influencer and Brand" by Onalytica (2015), a Huffington Post "Top 100 Cloud Computing Experts on Twitter" (2013) and a "Top 50 C...
Cloud-enabled transformation has evolved from cost saving measure to business innovation strategy -- one that combines the cloud with cognitive capabilities to drive market disruption. Learn how you can achieve the insight and agility you need to gain a competitive advantage. Industry-acclaimed CTO and cloud expert, Shankar Kalyana presents. Only the most exceptional IBMers are appointed with the rare distinction of IBM Fellow, the highest technical honor in the company. Shankar has also receive...
Enterprises have taken advantage of IoT to achieve important revenue and cost advantages. What is less apparent is how incumbent enterprises operating at scale have, following success with IoT, built analytic, operations management and software development capabilities - ranging from autonomous vehicles to manageable robotics installations. They have embraced these capabilities as if they were Silicon Valley startups.
Poor data quality and analytics drive down business value. In fact, Gartner estimated that the average financial impact of poor data quality on organizations is $9.7 million per year. But bad data is much more than a cost center. By eroding trust in information, analytics and the business decisions based on these, it is a serious impediment to digital transformation.
Daniel Jones is CTO of EngineerBetter, helping enterprises deliver value faster. Previously he was an IT consultant, indie video games developer, head of web development in the finance sector, and an award-winning martial artist. Continuous Delivery makes it possible to exploit findings of cognitive psychology and neuroscience to increase the productivity and happiness of our teams.
The standardization of container runtimes and images has sparked the creation of an almost overwhelming number of new open source projects that build on and otherwise work with these specifications. Of course, there's Kubernetes, which orchestrates and manages collections of containers. It was one of the first and best-known examples of projects that make containers truly useful for production use. However, more recently, the container ecosystem has truly exploded. A service mesh like Istio addr...
As DevOps methodologies expand their reach across the enterprise, organizations face the daunting challenge of adapting related cloud strategies to ensure optimal alignment, from managing complexity to ensuring proper governance. How can culture, automation, legacy apps and even budget be reexamined to enable this ongoing shift within the modern software factory? In her Day 2 Keynote at @DevOpsSummit at 21st Cloud Expo, Aruna Ravichandran, VP, DevOps Solutions Marketing, CA Technologies, was jo...
Predicting the future has never been more challenging - not because of the lack of data but because of the flood of ungoverned and risk laden information. Microsoft states that 2.5 exabytes of data are created every day. Expectations and reliance on data are being pushed to the limits, as demands around hybrid options continue to grow.
Business professionals no longer wonder if they'll migrate to the cloud; it's now a matter of when. The cloud environment has proved to be a major force in transitioning to an agile business model that enables quick decisions and fast implementation that solidify customer relationships. And when the cloud is combined with the power of cognitive computing, it drives innovation and transformation that achieves astounding competitive advantage.
Digital Transformation: Preparing Cloud & IoT Security for the Age of Artificial Intelligence. As automation and artificial intelligence (AI) power solution development and delivery, many businesses need to build backend cloud capabilities. Well-poised organizations, marketing smart devices with AI and BlockChain capabilities prepare to refine compliance and regulatory capabilities in 2018. Volumes of health, financial, technical and privacy data, along with tightening compliance requirements by...
As IoT continues to increase momentum, so does the associated risk. Secure Device Lifecycle Management (DLM) is ranked as one of the most important technology areas of IoT. Driving this trend is the realization that secure support for IoT devices provides companies the ability to deliver high-quality, reliable, secure offerings faster, create new revenue streams, and reduce support costs, all while building a competitive advantage in their markets. In this session, we will use customer use cases...
Evan Kirstel is an internationally recognized thought leader and social media influencer in IoT (#1 in 2017), Cloud, Data Security (2016), Health Tech (#9 in 2017), Digital Health (#6 in 2016), B2B Marketing (#5 in 2015), AI, Smart Home, Digital (2017), IIoT (#1 in 2017) and Telecom/Wireless/5G. His connections are a "Who's Who" in these technologies, He is in the top 10 most mentioned/re-tweeted by CMOs and CIOs (2016) and have been recently named 5th most influential B2B marketeer in the US. H...
The best way to leverage your Cloud Expo presence as a sponsor and exhibitor is to plan your news announcements around our events. The press covering Cloud Expo and @ThingsExpo will have access to these releases and will amplify your news announcements. More than two dozen Cloud companies either set deals at our shows or have announced their mergers and acquisitions at Cloud Expo. Product announcements during our show provide your company with the most reach through our targeted audiences.
DevOpsSummit New York 2018, colocated with CloudEXPO | DXWorldEXPO New York 2018 will be held November 11-13, 2018, in New York City. Digital Transformation (DX) is a major focus with the introduction of DXWorldEXPO within the program. Successful transformation requires a laser focus on being data-driven and on using all the tools available that enable transformation if they plan to survive over the long term. A total of 88% of Fortune 500 companies from a generation ago are now out of bus...
With 10 simultaneous tracks, keynotes, general sessions and targeted breakout classes, @CloudEXPO and DXWorldEXPO are two of the most important technology events of the year. Since its launch over eight years ago, @CloudEXPO and DXWorldEXPO have presented a rock star faculty as well as showcased hundreds of sponsors and exhibitors! In this blog post, we provide 7 tips on how, as part of our world-class faculty, you can deliver one of the most popular sessions at our events. But before reading...