|By PR Newswire||
|April 8, 2013 12:13 PM EDT||
Knife makers admit instrumental role in decision to allow small knives on airplanes
WASHINGTON, April 8, 2013 /PRNewswire-USNewswire/ -- Knife industry lobbyists appear to have played a key role in getting the Transportation Security Administration to allow knives back on commercial aircraft for the first time since 9/11.
After intense lobbying by knife manufacturers and knife industry groups, the policy change that will allow small knives on airplanes is set to take effect April 25. While knife advocates had their voices heard at TSA headquarters, TSA failed to consult with the American Federation of Government Employees, the union that represents 45,000 Transportation Security Officers.
In a press release issued after the decision was made, the American Knife & Tool Institute – a lobbying group run by knife manufacturers – touted itself as being "instrumental" in TSA's decision to remove small knives from its list of prohibited items.
"So now we know where this reckless and dangerous policy change came from," said J. David Cox Sr., national president of the American Federation of Government Employees. "This wasn't strictly about improving the screening process at our nation's airports, as TSA has claimed. The knife lobby fought for the change, but TSA never disclosed closed-door meetings with knife advocates when the policy change was announced.
"This decision compromises the safety of TSOs, flight attendants and the flying public for the benefit of the knife industry. Congress must step in and reverse this misguided policy change," Cox said.
According to the American Knife & Tool Institute, six of its most senior lobbyists met with several top level officials from the Homeland Security Department on Sept. 20 to argue for lifting the knife ban. In its press statement, the group quoted an unnamed senior advisor at TSA as saying the meeting was "invaluable" in the agency's decision to allow small knives aboard airplanes.
Even more troubling, it seems that the lobbyists have been emboldened by their victory and plan to push for allowing even more knives on airplanes. ATKI Vice President Rod Bremer, president of Columbia River Knife & Tool, complained that the knives TSA will allow on airplanes "are somewhat limited" but that the policy change "is a huge step in the right direction."
AFGE has joined with the Association of Flight Attendants-CWA in calling on TSA to reverse its policy change and supports ongoing efforts by lawmakers in the House and Senate to pass legislation that would keep all knives off airplanes.
The American Federation of Government Employees (AFGE) is the largest federal employee union, representing 670,000 workers in the federal government and the government of the District of Columbia.
SOURCE American Federation of Government Employees
The IoT market is on track to hit $7.1 trillion in 2020. The reality is that only a handful of companies are ready for this massive demand. There are a lot of barriers, paint points, traps, and hidden roadblocks. How can we deal with these issues and challenges? The paradigm has changed. Old-style ad-hoc trial-and-error ways will certainly lead you to the dead end. What is mandatory is an overarching and adaptive approach to effectively handle the rapid changes and exponential growth.
Oct. 8, 2015 05:00 PM EDT
Containers are revolutionizing the way we deploy and maintain our infrastructures, but monitoring and troubleshooting in a containerized environment can still be painful and impractical. Understanding even basic resource usage is difficult - let alone tracking network connections or malicious activity. In his session at DevOps Summit, Gianluca Borello, Sr. Software Engineer at Sysdig, will cover the current state of the art for container monitoring and visibility, including pros / cons and li...
Oct. 8, 2015 05:00 PM EDT Reads: 162
In their session at DevOps Summit, Asaf Yigal, co-founder and the VP of Product at Logz.io, and Tomer Levy, co-founder and CEO of Logz.io, will explore the entire process that they have undergone – through research, benchmarking, implementation, optimization, and customer success – in developing a processing engine that can handle petabytes of data. They will also discuss the requirements of such an engine in terms of scalability, resilience, security, and availability along with how the archi...
Oct. 8, 2015 05:00 PM EDT Reads: 389
“All our customers are looking at the cloud ecosystem as an important part of their overall product strategy. Some see it evolve as a multi-cloud / hybrid cloud strategy, while others are embracing all forms of cloud offerings like PaaS, IaaS and SaaS in their solutions,” noted Suhas Joshi, Vice President – Technology, at Harbinger Group, in this exclusive Q&A with Cloud Expo Conference Chair Roger Strukhoff.
Oct. 8, 2015 05:00 PM EDT Reads: 432
Chris Van Tuin, Chief Technologist for the Western US at Red Hat, has over 20 years of experience in IT and Software. Since joining Red Hat in 2005, he has been architecting solutions for strategic customers and partners with a focus on emerging technologies including IaaS, PaaS, and DevOps. He started his career at Intel in IT and Managed Hosting followed by leadership roles in services and sales engineering at Loudcloud and Linux startups.
Oct. 8, 2015 05:00 PM EDT Reads: 137
Any Ops team trying to support a company in today’s cloud-connected world knows that a new way of thinking is required – one just as dramatic than the shift from Ops to DevOps. The diversity of modern operations requires teams to focus their impact on breadth vs. depth. In his session at DevOps Summit, Adam Serediuk, Director of Operations at xMatters, Inc., will discuss the strategic requirements of evolving from Ops to DevOps, and why modern Operations has begun leveraging the “NoOps” approa...
Oct. 8, 2015 05:00 PM EDT Reads: 111
Today’s connected world is moving from devices towards things, what this means is that by using increasingly low cost sensors embedded in devices we can create many new use cases. These span across use cases in cities, vehicles, home, offices, factories, retail environments, worksites, health, logistics, and health. These use cases rely on ubiquitous connectivity and generate massive amounts of data at scale. These technologies enable new business opportunities, ways to optimize and automate, al...
Oct. 8, 2015 04:45 PM EDT Reads: 111
DevOps has often been described in terms of CAMS: Culture, Automation, Measuring, Sharing. While we’ve seen a lot of focus on the “A” and even on the “M”, there are very few examples of why the “C" is equally important in the DevOps equation. In her session at @DevOps Summit, Lori MacVittie, of F5 Networks, will explore HTTP/1 and HTTP/2 along with Microservices to illustrate why a collaborative culture between Dev, Ops, and the Network is critical to ensuring success.
Oct. 8, 2015 04:45 PM EDT Reads: 112
Between the compelling mockups and specs produced by analysts, and resulting applications built by developers, there exists a gulf where projects fail, costs spiral, and applications disappoint. Methodologies like Agile attempt to address this with intensified communication, with partial success but many limitations. In his session at DevOps Summit, Charles Kendrick, CTO and Chief Architect at Isomorphic Software, will present a revolutionary model enabled by new technologies. Learn how busine...
Oct. 8, 2015 04:45 PM EDT Reads: 237
IT data is typically silo'd by the various tools in place. Unifying all the log, metric and event data in one analytics platform stops finger pointing and provides the end-to-end correlation. Logs, metrics and custom event data can be joined to tell the holistic story of your software and operations. For example, users can correlate code deploys to system performance to application error codes.
Oct. 8, 2015 04:30 PM EDT Reads: 191
Can call centers hang up the phones for good? Intuitive Solutions did. WebRTC enabled this contact center provider to eliminate antiquated telephony and desktop phone infrastructure with a pure web-based solution, allowing them to expand beyond brick-and-mortar confines to a home-based agent model. It also ensured scalability and better service for customers, including MUY! Companies, one of the country's largest franchise restaurant companies with 232 Pizza Hut locations. This is one example of...
Oct. 8, 2015 04:30 PM EDT Reads: 7,457
There are so many tools and techniques for data analytics that even for a data scientist the choices, possible systems, and even the types of data can be daunting. In his session at @ThingsExpo, Chris Harrold, Global CTO for Big Data Solutions for EMC Corporation, will show how to perform a simple, but meaningful analysis of social sentiment data using freely available tools that take only minutes to download and install. Participants will get the download information, scripts, and complete en...
Oct. 8, 2015 04:30 PM EDT Reads: 234
There are many considerations when moving applications from on-premise to cloud. It is critical to understand the benefits and also challenges of this migration. A successful migration will result in lower Total Cost of Ownership, yet offer the same or higher level of robustness. Migration to cloud shifts computing resources from your data center, which can yield significant advantages provided that the cloud vendor an offer enterprise-grade quality for your application.
Oct. 8, 2015 04:00 PM EDT Reads: 219
Cloud computing delivers on-demand resources that provide businesses with flexibility and cost-savings. The challenge in moving workloads to the cloud has been the cost and complexity of ensuring the initial and ongoing security and regulatory (PCI, HIPAA, FFIEC) compliance across private and public clouds. Manual security compliance is slow, prone to human error, and represents over 50% of the cost of managing cloud applications. Determining how to automate cloud security compliance is critical...
Oct. 8, 2015 04:00 PM EDT Reads: 297
Manufacturing has widely adopted standardized and automated processes to create designs, build them, and maintain them through their life cycle. However, many modern manufacturing systems go beyond mechanized workflows to introduce empowered workers, flexible collaboration, and rapid iteration. Such behaviors also characterize open source software development and are at the heart of DevOps culture, processes, and tooling.
Oct. 8, 2015 04:00 PM EDT Reads: 1,062