Welcome!

News Feed Item

AEG Power Solutions Helps Improve Performance of Mobile Base Stations to Support 4G/LTE Implementation

AEG Power Solutions (AEG PS) (FWB:3W9) announces the availability of its new eighth-brick CME02, completing the range of board-mount power products designed specifically for RF power amplifiers. The CME02 complements the CMH12 half-brick and the CMF21 and CMF25 full-brick products already available from AEG PS. All of these products incorporate features that support the very competitive marketplace for 4G/LTE wireless base stations as operators deploy new infrastructure to keep pace with consumer demand.

New CME02 eighth brick power modules for RF amplifier applications (Photo: Business Wire)

New CME02 eighth brick power modules for RF amplifier applications (Photo: Business Wire)

These products provide voltage regulation using a high performance control loop that responds extremely quickly and can fully stabilize the output voltage within less than 300µs even after a load transient of 50%. The output voltage can be trimmed over a wide range to precisely match the RF amplifier needs and optimize RF performance. The trim input also allows the voltage to be reduced during periods of low traffic to further improve overall system efficiency. These products are suitable for use in a sealed enclosure mounted on the antenna tower and feature a built-in baseplate for conduction cooling, allowing full power delivery at up to 100°C. The efficiency is greater than 91% which minimizes excess heat in the enclosure and an optimized single-board design offers a highly reliable solution.

The full brick and half brick products are ideal for macro BTS and remote radio head applications, where they provide clean DC power at up to 700W from either 48V or 24V input. Industry trends are toward smaller cell sites to provide improved coverage in urban areas, using combinations of micro BTS, pico cells and similar small systems. There is a corresponding demand for high performance RF amplifiers with lower RF output levels and the CME02 is designed for these types of applications, with up to 80W dc power from 48V input.

In addition to this range of standard products, AEG PS manufactures a large number of custom and semi-custom solutions for RF or other specific applications, operating from either AC or DC input. By leveraging from existing product platforms, AEG PS can develop custom solutions that offer the lowest system cost while delivering outstanding performance and reliability.

For more information. http://www.aegps.com/en/ees/embedded-power-supplies/standard-bmps/cme-02-si/

###

About AEG Power Solutions

AEG Power Solutions (AEG PS) Group is a global provider of power electronics systems and solutions for all industrial power requirements offering one of the most comprehensive product and service portfolios in the area of power conversion and power control. Two complementary operating business segments, Renewable Energy Solutions (RES) and Energy Efficiency Solutions (EES) serve customers worldwide. The RES product and service portfolio consists of systems and solutions for solar power plants, such as solar inverters, monitoring and control systems as well as power controllers for a wide range of industrial applications such as polysilicon, energy storage, sapphire and glass. The EES product and service portfolio includes high-performance uninterruptable power supplies (UPSs), industrial chargers, DC systems and converters.

Thanks to its distinctive expertise bridging both AC and DC power technologies and spanning the worlds of both conventional and renewable energy, the company creates innovative solutions for smart grids.

AEG PS’ global footprint includes 22 subsidiaries, offices and competence centers around the world with 1,600 employees.

AEG Power Solutions Group is the sole subsidiary of the holding company 3W Power S.A. (WKN A0Q5SX / ISIN GG00B39QCR01), based in Luxembourg. The Group is headquartered in Zwanenburg in the Netherlands. The shares of 3W Power are admitted to trading on Frankfurt Stock Exchange (ticker symbol: 3W9).

For more information, visit www.aegps.com.

This communication does not constitute an offer or the solicitation of an offer to buy, sell or exchange any securities of 3W Power. This communication contains forward-looking statements which include, inter alia, statements expressing our expectations, intentions, projections, estimates, and assumptions. These forward-looking statements are based on the reasonable evaluation and opinion of the management but are subject to risks and uncertainties which are beyond the control of 3W Power and, as a general rule, difficult to predict. The management and the company cannot and do not, under any circumstances, guarantee future results or performance of 3W Power and the actual results of 3W Power may materially differ from the information expressed or implied in the forward-looking statements. As a result, investors are cautioned against relying on the forward-looking statements contained herein as a basis for their investment decisions regarding 3W Power.

3W Power undertakes no obligation to update or revise any forward-looking statement contained herein.

AEG is a registered trademark used under license from AB Electrolux

More Stories By Business Wire

Copyright © 2009 Business Wire. All rights reserved. Republication or redistribution of Business Wire content is expressly prohibited without the prior written consent of Business Wire. Business Wire shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon.

Latest Stories
WebRTC adoption has generated a wave of creative uses of communications and collaboration through websites, sales apps, customer care and business applications. As WebRTC has become more mainstream it has evolved to use cases beyond the original peer-to-peer case, which has led to a repeating requirement for interoperability with existing infrastructures. In his session at @ThingsExpo, Graham Holt, Executive Vice President of Daitan Group, will cover implementation examples that have enabled ea...
Kubernetes is a new and revolutionary open-sourced system for managing containers across multiple hosts in a cluster. Ansible is a simple IT automation tool for just about any requirement for reproducible environments. In his session at @DevOpsSummit at 18th Cloud Expo, Patrick Galbraith, a principal engineer at HPE, discussed how to build a fully functional Kubernetes cluster on a number of virtual machines or bare-metal hosts. Also included will be a brief demonstration of running a Galera M...
IoT offers a value of almost $4 trillion to the manufacturing industry through platforms that can improve margins, optimize operations & drive high performance work teams. By using IoT technologies as a foundation, manufacturing customers are integrating worker safety with manufacturing systems, driving deep collaboration and utilizing analytics to exponentially increased per-unit margins. However, as Benoit Lheureux, the VP for Research at Gartner points out, “IoT project implementers often ...
SYS-CON Events announced today that Tintri Inc., a leading producer of VM-aware storage (VAS) for virtualization and cloud environments, will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Tintri VM-aware storage is the simplest for virtualized applications and cloud. Organizations including GE, Toyota, United Healthcare, NASA and 6 of the Fortune 15 have said “No to LUNs.” With Tintri they mana...
The Jevons Paradox suggests that when technological advances increase efficiency of a resource, it results in an overall increase in consumption. Writing on the increased use of coal as a result of technological improvements, 19th-century economist William Stanley Jevons found that these improvements led to the development of new ways to utilize coal. In his session at 19th Cloud Expo, Mark Thiele, Chief Strategy Officer for Apcera, will compare the Jevons Paradox to modern-day enterprise IT, e...
SYS-CON Events announced today the Enterprise IoT Bootcamp, being held November 1-2, 2016, in conjunction with 19th Cloud Expo | @ThingsExpo at the Santa Clara Convention Center in Santa Clara, CA. Combined with real-world scenarios and use cases, the Enterprise IoT Bootcamp is not just based on presentations but with hands-on demos and detailed walkthroughs. We will introduce you to a variety of real world use cases prototyped using Arduino, Raspberry Pi, BeagleBone, Spark, and Intel Edison. Y...
Complete Internet of Things (IoT) embedded device security is not just about the device but involves the entire product’s identity, data and control integrity, and services traversing the cloud. A device can no longer be looked at as an island; it is a part of a system. In fact, given the cross-domain interactions enabled by IoT it could be a part of many systems. Also, depending on where the device is deployed, for example, in the office building versus a factory floor or oil field, security ha...
Is your aging software platform suffering from technical debt while the market changes and demands new solutions at a faster clip? It’s a bold move, but you might consider walking away from your core platform and starting fresh. ReadyTalk did exactly that. In his General Session at 19th Cloud Expo, Michael Chambliss, Head of Engineering at ReadyTalk, will discuss why and how ReadyTalk diverted from healthy revenue and over a decade of audio conferencing product development to start an innovati...
Fifty billion connected devices and still no winning protocols standards. HTTP, WebSockets, MQTT, and CoAP seem to be leading in the IoT protocol race at the moment but many more protocols are getting introduced on a regular basis. Each protocol has its pros and cons depending on the nature of the communications. Does there really need to be only one protocol to rule them all? Of course not. In his session at @ThingsExpo, Chris Matthieu, co-founder and CTO of Octoblu, walk you through how Oct...
SYS-CON Events announced today that Bsquare has been named “Silver Sponsor” of SYS-CON's @ThingsExpo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. For more than two decades, Bsquare has helped its customers extract business value from a broad array of physical assets by making them intelligent, connecting them, and using the data they generate to optimize business processes.
Whether they’re located in a public, private, or hybrid cloud environment, cloud technologies are constantly evolving. While the innovation is exciting, the end mission of delivering business value and rapidly producing incremental product features is paramount. In his session at @DevOpsSummit at 19th Cloud Expo, Kiran Chitturi, CTO Architect at Sungard AS, will discuss DevOps culture, its evolution of frameworks and technologies, and how it is achieving maturity. He will also cover various st...
There are several IoTs: the Industrial Internet, Consumer Wearables, Wearables and Healthcare, Supply Chains, and the movement toward Smart Grids, Cities, Regions, and Nations. There are competing communications standards every step of the way, a bewildering array of sensors and devices, and an entire world of competing data analytics platforms. To some this appears to be chaos. In this power panel at @ThingsExpo, moderated by Conference Chair Roger Strukhoff, Bradley Holt, Developer Advocate a...
Identity is in everything and customers are looking to their providers to ensure the security of their identities, transactions and data. With the increased reliance on cloud-based services, service providers must build security and trust into their offerings, adding value to customers and improving the user experience. Making identity, security and privacy easy for customers provides a unique advantage over the competition.
SYS-CON Events announced today that Niagara Networks will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Niagara Networks offers the highest port-density systems, and the most complete Next-Generation Network Visibility systems including Network Packet Brokers, Bypass Switches, and Network TAPs.
SYS-CON Events announced today that Secure Channels will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. The bedrock of Secure Channels Technology is a uniquely modified and enhanced process based on superencipherment. Superencipherment is the process of encrypting an already encrypted message one or more times, either using the same or a different algorithm.