Welcome!

News Feed Item

TAT Technologies Reports That the Anti-Trust Approval for FIMI Opportunity V's Proposal to Acquire TAT's Shares, has Been Received

GEDERA, Israel, July 22, 2013 /PRNewswire/ --

TAT Technologies Ltd. (Nasdaq: TATT), a leading provider of services and products to the commercial and military aerospace and ground defense industries, today reported that the Anti-Trust Authority had approved FIMI Opportunity V's ("FIMI") proposal to acquire the Company's shares held by its previously controlling shareholders.

Following such approval, Closing is expected to occur within a few days.

About TAT Technologies LTD

TAT Technologies LTD is a leading provider of services and products to the commercial and military aerospace and ground defense industries.

TAT operates under four segments:  (i) Original Equipment Manufacturing or "OEM" of Heat Management Solutions (ii) OEM of Electric Motion Systems (iii) Heat Transfer Services and Products and (iv) Maintenance, Repair and Overhaul or "MRO" services of Aviation Components.

TAT's activities in the area of OEM of Heat Management Solutions primarily include the design, development, manufacture and sale of (i) a broad range of heat transfer components (such as heat exchangers, pre-coolers and oil/fuel hydraulic coolers) used in mechanical and electronic systems on-board commercial, military and business aircraft; (ii) environmental control and cooling systems on board aircraft and for ground applications; and (iii) a variety of other electronic and mechanical aircraft accessories and systems such as pumps, valves, power systems and turbines.

TAT's activities in the area of OEM of Electric Motion Systems primarily include the design, development, manufacture and sale of a broad range of electrical motor applications for airborne and ground systems.

TAT's activities in the area of Heat Transfer Services and Products include the maintenance, repair and overhaul of heat transfer equipment and in a lesser extent, the manufacturing of certain heat transfer products. TAT's Limco subsidiary operates FAA certified repair station, which provides heat transfer MRO services and products for airlines, air cargo carriers, maintenance service centers and the military.

TAT's activities in the area of MRO services for Aviation Components include the maintenance, repair and overhaul of APUs, Landing Gear and other aircraft components. TAT's Piedmont subsidiary operates an FAA certified repair station, which provides aircraft component MRO services for airlines, air cargo carriers, maintenance service centers and the military.

TAT also holds approximately 30% of the equity of First Aviation Services, a one-stop-shop for MRO services (wheels, breaks, propellers and landing gear) for the General Aviation Industry.

TAT's executive offices are located in the Re'em Industrial Park, Neta Boulevard, Bnei Ayish, Gedera 70750, Israel, and TAT's telephone number is 972-8-862-8500.

Safe Harbor for Forward-Looking Statements

This press release contains forward-looking statements which include, without limitation, statements regarding possible or assumed future operation results. These statements are hereby identified as "forward-looking statements" for purposes of the safe harbor provided by the Private Securities Litigation Reform Act of 1995. These forward-looking statements involve risks and uncertainties that could cause our results to differ materially from management's current expectations. Actual results and performance can also be influenced by other risks that we face in running our operations including, but are not limited to, general business conditions in the airline industry, changes in demand for our services and products, the timing and amount or cancellation of orders, the price and continuity of supply of component parts used in our operations, and other risks detailed from time to time in the company's filings with the Securities Exchange Commission, including, its annual report on form 20-F and its periodic reports on form 6-K. These documents contain and identify other important factors that could cause actual results to differ materially from those contained in our projections or forward-looking statements. Stockholders and other readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date on which they are made. We undertake no obligation to update publicly or revise any forward-looking statement.

For more information of TAT Technologies, please visit our web-site: http://www.tat-technologies.com

Contact:
Yaron Shalem
CFO
Tel: +972-88628501
[email protected]

SOURCE TAT Technologies Ltd

More Stories By PR Newswire

Copyright © 2007 PR Newswire. All rights reserved. Republication or redistribution of PRNewswire content is expressly prohibited without the prior written consent of PRNewswire. PRNewswire shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon.

Latest Stories
To get the most out of their data, successful companies are not focusing on queries and data lakes, they are actively integrating analytics into their operations with a data-first application development approach. Real-time adjustments to improve revenues, reduce costs, or mitigate risk rely on applications that minimize latency on a variety of data sources. Jack Norris reviews best practices to show how companies develop, deploy, and dynamically update these applications and how this data-first...
Intelligent Automation is now one of the key business imperatives for CIOs and CISOs impacting all areas of business today. In his session at 21st Cloud Expo, Brian Boeggeman, VP Alliances & Partnerships at Ayehu, will talk about how business value is created and delivered through intelligent automation to today’s enterprises. The open ecosystem platform approach toward Intelligent Automation that Ayehu delivers to the market is core to enabling the creation of the self-driving enterprise.
"At the keynote this morning we spoke about the value proposition of Nutanix, of having a DevOps culture and a mindset, and the business outcomes of achieving agility and scale, which everybody here is trying to accomplish," noted Mark Lavi, DevOps Solution Architect at Nutanix, in this SYS-CON.tv interview at @DevOpsSummit at 20th Cloud Expo, held June 6-8, 2017, at the Javits Center in New York City, NY.
Internet-of-Things discussions can end up either going down the consumer gadget rabbit hole or focused on the sort of data logging that industrial manufacturers have been doing forever. However, in fact, companies today are already using IoT data both to optimize their operational technology and to improve the experience of customer interactions in novel ways. In his session at @ThingsExpo, Gordon Haff, Red Hat Technology Evangelist, shared examples from a wide range of industries – including en...
In IT, we sometimes coin terms for things before we know exactly what they are and how they’ll be used. The resulting terms may capture a common set of aspirations and goals – as “cloud” did broadly for on-demand, self-service, and flexible computing. But such a term can also lump together diverse and even competing practices, technologies, and priorities to the point where important distinctions are glossed over and lost.
"We're here to tell the world about our cloud-scale infrastructure that we have at Juniper combined with the world-class security that we put into the cloud," explained Lisa Guess, VP of Systems Engineering at Juniper Networks, in this SYS-CON.tv interview at 20th Cloud Expo, held June 6-8, 2017, at the Javits Center in New York City, NY.
Enterprise architects are increasingly adopting multi-cloud strategies as they seek to utilize existing data center assets, leverage the advantages of cloud computing and avoid cloud vendor lock-in. This requires a globally aware traffic management strategy that can monitor infrastructure health across data centers and end-user experience globally, while responding to control changes and system specification at the speed of today’s DevOps teams. In his session at 20th Cloud Expo, Josh Gray, Chie...
Consumers increasingly expect their electronic "things" to be connected to smart phones, tablets and the Internet. When that thing happens to be a medical device, the risks and benefits of connectivity must be carefully weighed. Once the decision is made that connecting the device is beneficial, medical device manufacturers must design their products to maintain patient safety and prevent compromised personal health information in the face of cybersecurity threats. In his session at @ThingsExpo...
All organizations that did not originate this moment have a pre-existing culture as well as legacy technology and processes that can be more or less amenable to DevOps implementation. That organizational culture is influenced by the personalities and management styles of Executive Management, the wider culture in which the organization is situated, and the personalities of key team members at all levels of the organization. This culture and entrenched interests usually throw a wrench in the work...
"We're a cybersecurity firm that specializes in engineering security solutions both at the software and hardware level. Security cannot be an after-the-fact afterthought, which is what it's become," stated Richard Blech, Chief Executive Officer at Secure Channels, in this SYS-CON.tv interview at @ThingsExpo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
In his session at 20th Cloud Expo, Mike Johnston, an infrastructure engineer at Supergiant.io, discussed how to use Kubernetes to set up a SaaS infrastructure for your business. Mike Johnston is an infrastructure engineer at Supergiant.io with over 12 years of experience designing, deploying, and maintaining server and workstation infrastructure at all scales. He has experience with brick and mortar data centers as well as cloud providers like Digital Ocean, Amazon Web Services, and Rackspace. H...
You know you need the cloud, but you’re hesitant to simply dump everything at Amazon since you know that not all workloads are suitable for cloud. You know that you want the kind of ease of use and scalability that you get with public cloud, but your applications are architected in a way that makes the public cloud a non-starter. You’re looking at private cloud solutions based on hyperconverged infrastructure, but you’re concerned with the limits inherent in those technologies.
SYS-CON Events announced today that Massive Networks will exhibit at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Massive Networks mission is simple. To help your business operate seamlessly with fast, reliable, and secure internet and network solutions. Improve your customer's experience with outstanding connections to your cloud.
DevOps is under attack because developers don’t want to mess with infrastructure. They will happily own their code into production, but want to use platforms instead of raw automation. That’s changing the landscape that we understand as DevOps with both architecture concepts (CloudNative) and process redefinition (SRE). Rob Hirschfeld’s recent work in Kubernetes operations has led to the conclusion that containers and related platforms have changed the way we should be thinking about DevOps and...
SYS-CON Events announced today that SkyScale will exhibit at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. SkyScale is a world-class provider of cloud-based, ultra-fast multi-GPU hardware platforms for lease to customers desiring the fastest performance available as a service anywhere in the world. SkyScale builds, configures, and manages dedicated systems strategically located in maximum-security...