Welcome!

News Feed Item

Strata-X Recovers Core, Reaches Total Depth, Sets Casing-Maverick Oil Project

DENVER, COLORADO and BRISBANE, AUSTRALIA and VANCOUVER, BRITISH COLUMBIA -- (Marketwired) -- 01/13/14 --


--  Completed coring operations on the Eagle Ford shale and Buda formations,
    recovered 100% of the targeted 600 foot interval.

--  Reached total depth of 4,220 feet and logged the well.

--  Set and cemented 4 1/2 inch casing to total depth.

The directors and management of Strata-X Energy Ltd. ("Strata-X" or the "Company") (TSX VENTURE: SXE)(ASX: SXA) are pleased to announce that coring operations on the Eagle Ford shale and Buda formations on the Cinco Saus Creek #1 well have recovered 100% of the targeted 600 foot interval and that the well was drilled to a total depth of 4,220 feet as planned. Upon reaching total depth, the well was logged and 4 1/2 inch casing was set and cemented into place. Unison Drilling, Inc. rig #11, which was utilized to drill the well, has been released and is mobilizing off the well location.

The 600 foot core of the Eagle Ford shale and Buda formations is being sent to a laboratory for analysis. The pending laboratory analysis, along with well logs and data acquired in drilling the well, will be used to finalize the design of the completion stimulation. Strata-X anticipates the vertical completion stimulation of the Cinco Saus Creek #1 well will occur near the end of the first quarter of 2014.

Strata-X is the operator of the Cinco Saus Creek #1 well and retains an approximate 96.9% working interest in it. Strata-X's joint venture partner on the Maverick Oil Project elected not to participate on the Cinco Saus Creek #1 well. This election grants Strata-X an additional 3.1% working interest in the well, which interest is subject to a 300% payback penalty. Overall, the Company has acquired exploration rights to 10,945 mostly contiguous net acres in the Maverick Oil Project.

The Company has released an Investor Presentation on the Maverick Oil Project which can be found at www.strata-x.com.

About Strata-X

Strata-X is a Denver, Colorado (USA) based company and is engaged in the business of oil and gas exploration and development with a variety of exploration opportunities in North Dakota, California, Colorado, Texas, Illinois and Western Australia and production and development opportunities in California. Strata-X has 139,785,415 common shares outstanding and trades under the symbol "SXE" on the TSX-V and "SXA" on the ASX.

This announcement was made in Canada for the TSX.V and in Australia for the ASX.

Public documents for Strata-X Energy Ltd. can be found at SEDAR (Canada) (www.sedar.com) and ASX.com.au (Australia).

By definition of the COGE Handbook - "Undiscovered resources are those quantities of oil and gas estimated on a given date to be contained in accumulations yet to be discovered." The Handbook further states - Caution (per NI 51-101/5.9(2)(v)(B)) - "There is no certainty that any portion of the resources will be discovered. If discovered, there is no certainty that it will be commercially viable to produce any portion of the resources." In addition, per NI 51-101/5.6 "the estimated values disclosed do not represent fair market value."

CAUTIONARY STATEMENTS

This news release contains forward-looking statements, which relate to future events or future performance and reflect management's current expectations and assumptions. The use of any of the words "anticipate", "continue", "estimate", "expect", 'may", "will", "project", "should", 'believe", and similar expressions is intended to identify forward-looking statements. Such forward-looking statements reflect management's current beliefs and are based on assumptions made by and information currently available to the Company. Readers are cautioned that these forward-looking statements are neither promises nor guarantees, and are subject to risks and uncertainties that may cause future results to differ materially from those expected and the forward-looking statements included in this news release should not be unduly relied upon. See "Risks and Uncertainties" in the Company's Filing Statement dated August 30, 2011 available on SEDAR at www.sedar.com. These forward-looking statements are made as of the date hereof and the Company does not assume any obligation to update or revise them to reflect new events or circumstances save as required under applicable securities legislation. This news release does not constitute an offer to sell securities and the Company is not soliciting an offer to buy securities in any jurisdiction in which such offer, solicitation or sale would be unlawful prior to registration or qualification under the securities laws of such jurisdiction.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Contacts:
Tim Hoops (USA)
President
+1 855-463-2400
[email protected]

Colin Christensen (Canada)
Investor Relations
+1 403-483-8363
[email protected]

Duncan Cornish (Australia)
Corporate Secretary
+61 7 3212-6299
[email protected]
www.strata-x.com

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
“delaPlex Software provides software outsourcing services. We have a hybrid model where we have onshore developers and project managers that we can place anywhere in the U.S. or in Europe,” explained Manish Sachdeva, CEO at delaPlex Software, in this SYS-CON.tv interview at @ThingsExpo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Keeping pace with advancements in software delivery processes and tooling is taxing even for the most proficient organizations. Point tools, platforms, open source and the increasing adoption of private and public cloud services requires strong engineering rigor – all in the face of developer demands to use the tools of choice. As Agile has settled in as a mainstream practice, now DevOps has emerged as the next wave to improve software delivery speed and output. To make DevOps work, organization...
"We've discovered that after shows 80% if leads that people get, 80% of the conversations end up on the show floor, meaning people forget about it, people forget who they talk to, people forget that there are actual business opportunities to be had here so we try to help out and keep the conversations going," explained Jeff Mesnik, Founder and President of ContentMX, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Let’s face it, embracing new storage technologies, capabilities and upgrading to new hardware often adds complexity and increases costs. In his session at 18th Cloud Expo, Seth Oxenhorn, Vice President of Business Development & Alliances at FalconStor, discussed how a truly heterogeneous software-defined storage approach can add value to legacy platforms and heterogeneous environments. The result reduces complexity, significantly lowers cost, and provides IT organizations with improved efficienc...
SYS-CON Events announced today that Isomorphic Software will exhibit at DevOps Summit at 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Isomorphic Software provides the SmartClient HTML5/AJAX platform, the most advanced technology for building rich, cutting-edge enterprise web applications for desktop and mobile. SmartClient combines the productivity and performance of traditional desktop software with the simp...
"When you think about the data center today, there's constant evolution, The evolution of the data center and the needs of the consumer of technology change, and they change constantly," stated Matt Kalmenson, VP of Sales, Service and Cloud Providers at Veeam Software, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Internet of @ThingsExpo, taking place November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA, is co-located with the 19th International Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world and ThingsExpo Silicon Valley Call for Papers is now open.
In his session at @DevOpsSummit at 19th Cloud Expo, Yoseph Reuveni, Director of Software Engineering at Jet.com, will discuss Jet.com's journey into containerizing Microsoft-based technologies like C# and F# into Docker. He will talk about lessons learned and challenges faced, the Mono framework tryout and how they deployed everything into Azure cloud. Yoseph Reuveni is a technology leader with unique experience developing and running high throughput (over 1M tps) distributed systems with extre...
The IoT is changing the way enterprises conduct business. In his session at @ThingsExpo, Eric Hoffman, Vice President at EastBanc Technologies, discussed how businesses can gain an edge over competitors by empowering consumers to take control through IoT. He cited examples such as a Washington, D.C.-based sports club that leveraged IoT and the cloud to develop a comprehensive booking system. He also highlighted how IoT can revitalize and restore outdated business models, making them profitable ...
To leverage Continuous Delivery, enterprises must consider impacts that span functional silos, as well as applications that touch older, slower moving components. Managing the many dependencies can cause slowdowns. See how to achieve continuous delivery in the enterprise.
"delaPlex is a software development company. We do team-based outsourcing development," explained Mark Rivers, COO and Co-founder of delaPlex Software, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
We all know the latest numbers: Gartner, Inc. forecasts that 6.4 billion connected things will be in use worldwide in 2016, up 30 percent from last year, and will reach 20.8 billion by 2020. We're rapidly approaching a data production of 40 zettabytes a day – more than we can every physically store, and exabytes and yottabytes are just around the corner. For many that’s a good sign, as data has been proven to equal money – IF it’s ingested, integrated, and analyzed fast enough. Without real-ti...
"There's a growing demand from users for things to be faster. When you think about all the transactions or interactions users will have with your product and everything that is between those transactions and interactions - what drives us at Catchpoint Systems is the idea to measure that and to analyze it," explained Leo Vasiliou, Director of Web Performance Engineering at Catchpoint Systems, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York Ci...
I wanted to gather all of my Internet of Things (IOT) blogs into a single blog (that I could later use with my University of San Francisco (USF) Big Data “MBA” course). However as I started to pull these blogs together, I realized that my IOT discussion lacked a vision; it lacked an end point towards which an organization could drive their IOT envisioning, proof of value, app dev, data engineering and data science efforts. And I think that the IOT end point is really quite simple…
As companies gain momentum, the need to maintain high quality products can outstrip their development team’s bandwidth for QA. Building out a large QA team (whether in-house or outsourced) can slow down development and significantly increases costs. This eBook takes QA profiles from 5 companies who successfully scaled up production without building a large QA team and includes: What to consider when choosing CI/CD tools How culture and communication can make or break implementation