Welcome!

News Feed Item

Tanaka Precious Metals Commence Sales of Highly Electrically Conductive Silver Alloy Bonding Wire on January 15

Source: Tanaka Holdings Co., Ltd.


Electrical conductivity improved by approx. 30%, providing the same performance as high-purity gold bonding wire

Appearance of SEC
Tokyo, Jan 14, 2014 - (ACN Newswire) - Tanaka Holdings Co., Ltd. (a company of Tanaka Precious Metals) today announced that Tanaka Denshi Kogyo K.K. of Tanaka Precious Metals, which boasts the world's leading share in bonding wire (wiring material) manufacturing, has developed "SEC" silver alloy bonding wire (referred to as "SEC" below) with electrical conductivity improved by approximately 30% compared to the existing product, and will commence sales on January 15.

SEC has electrical resistivity of 2.8 micro-ohm centimeters, and electrical conductivity has improved by approximately 30% compared to the existing product (Tanaka's "SEB"). As a result, it provides electrical resistivity comparable to that of the electrical resistance (approximately 2.3 micro-ohm centimeters) of bonding wire made of 99.99% purity gold (referred to as 4N-Au wire below). Furthermore, the FAB (Free Air Ball: the ball shape formed by the melted tip of the bonding wire) softness has also been improved to the same level as 4N-Au, providing high bondability that meets high performance requirements without damaging aluminum electrodes.

Costs Can be Reduced by Approximately 80% with the Same Performance as 4N-Au Wire

When replacing 4N-Au wire with silver alloy bonding wire, it is possible to reduce precious metal bullion costs by approximately 80%(*1), but increased electrical resistivity (lower electrical conductivity) was an issue. SEC optimizes the alloy composition that caused the increased electrical resistivity, providing the same performance as 4N-Au wire by improving processing methods. Customers can use SEC in all areas where 4N-Au wire is used such as IC and LSI wiring material. The features of SEC are as follows.

-- Electrical conductivity: Has been improved by approximately 30%, providing the same level of electrical conductivity as 4N-Au wire.
-- Bondability: SEC has excellent bondability due to FAB softness improvement comparable to 4N-Au wire.
-- Cost: Compared to the precious metal bullion cost of 4N-Au wire, the precious metal bullion cost of SEC is approximately 80% lower.
-- Corrosion resistance: SEC has the same level of high reliability as the existing product.
-- Productivity: SEC allows for sufficient adhesion under almost the same usage conditions as 4N-Au wire.
-- SEC can be attached using inexpensive and safe nitrogen gas by partially modifying the equipment for gold bonding wire.

The size of the silver alloy bonding wire market is currently approximately 60 million meters, but Tanaka Denshi Kogyo expects this to grow to approximately 200 million meters in three years, and aims for monthly sales of 500 million yen in three years by offering SEC to semiconductor manufacturers and LED manufacturers. Tanaka Denshi Kogyo has scheduled to exhibit SEC at the 15th IC Packaging Technology Expo to be held at Tokyo Big Sight (Koto-ku, Tokyo) for three days from January 15 (Wed) until January 17 (Fri). Technical staff will constantly be on-site in the exhibit booth (East 43-001) to respond to interviews.

Press release: http://www.acnnewswire.com/clientreports/598/0114_EN.pdf

(*1) When the wire diameter is 25 micrometers (micro is 1/1,000,000).


Tanaka Holdings Co., Ltd. (Holding company of Tanaka Precious Metals)

Headquarters: 22F, Tokyo Building, 2-7-3 Marunouchi, Chiyoda-ku, Tokyo
Representative: Hideya Okamoto, President & CEO
Founded: 1885
Incorporated: 1918
Capital: 500 million yen
Employees in consolidated group: 3,895 (FY2012)
Net sales of consolidated group: 839.2 billion yen (FY2012)
Main businesses of the group: Manufacture, sales, import and export of precious metals (platinum, gold, silver, and others) and various types of industrial precious metals products. Recycling and refining of precious metals.
Website: http://www.tanaka.co.jp/english (Tanaka Precious Metals), http://pro.tanaka.co.jp/en (Industrial products)

Tanaka Denshi Kogyo K.K.

Head office: 22F Tokyo Building, 2-7-3 Marunouchi, Chiyoda-ku, Tokyo
Representative: Koichiro Tanaka, President & CEO
Incorporated: 1961
Capital: 1,880 million yen
Employees: 151 (FY2012)
Net sales: 32,323 million yen (FY2012)
Businesses: Manufacture of high-purity bonding wire (gold, gold alloy, aluminum, aluminum-silicon, copper, etc.)
Website: http://www.tanaka-bondingwire.com/

About the Tanaka Precious Metals

Established in 1885, the Tanaka Precious Metals has built a diversified range of business activities focused on the use of precious metals. On April 1, 2010, the group was reorganized with Tanaka Holdings Co., Ltd. as the holding company (parent company) of the Tanaka Precious Metals. In addition to strengthening corporate governance, the company aims to improve overall service to customers by ensuring efficient management and dynamic execution of operations. Tanaka Precious Metals is committed, as a specialist corporate entity, to providing a diverse range of products through cooperation among group companies.

Tanaka Precious Metals is in the top class in Japan in terms of the volume of precious metal handled, and for many years the group has developed and stably supplied industrial precious metals, in addition to providing accessories and savings commodities utilizing precious metals. As precious metal professionals, the Group will continue to contribute to enriching people's lives in the future.

The eight core companies in the Tanaka Precious Metals are as follows.
- Tanaka Holdings Co., Ltd. (pure holding company)
- Tanaka Kikinzoku Kogyo K.K.
- Tanaka Kikinzoku Hanbai K.K.
- Tanaka Kikinzoku International K.K.
- Tanaka Denshi Kogyo K.K.
- Electroplating Engineers of Japan, Limited
- Tanaka Kikinzoku Jewelry K.K.
- Tanaka Kikinzoku Business Service K.K.

Press inquiries
Global Sales Dept., Tanaka Kikinzoku International K.K. (TKI)
https://www.tanaka.co.jp/support/req/ks_contact_e/index.html

Source: Tanaka Holdings Co., Ltd.

Copyright 2014 ACN Newswire. All rights reserved.

More Stories By ACN Newswire

Copyright 2008 ACN Newswire. All rights reserved. Republication or redistribution of ACN Newswire content is expressly prohibited without the prior written consent of ACN Newswire. ACN Newswire shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon.

Latest Stories
From 2013, NTT Communications has been providing cPaaS service, SkyWay. Its customer’s expectations for leveraging WebRTC technology are not only typical real-time communication use cases such as Web conference, remote education, but also IoT use cases such as remote camera monitoring, smart-glass, and robotic. Because of this, NTT Communications has numerous IoT business use-cases that its customers are developing on top of PaaS. WebRTC will lead IoT businesses to be more innovative and address...
As DevOps methodologies expand their reach across the enterprise, organizations face the daunting challenge of adapting related cloud strategies to ensure optimal alignment, from managing complexity to ensuring proper governance. How can culture, automation, legacy apps and even budget be reexamined to enable this ongoing shift within the modern software factory?
Recently, IoT seems emerging as a solution vehicle for data analytics on real-world scenarios from setting a room temperature setting to predicting a component failure of an aircraft. Compared with developing an application or deploying a cloud service, is an IoT solution unique? If so, how? How does a typical IoT solution architecture consist? And what are the essential components and how are they relevant to each other? How does the security play out? What are the best practices in formulating...
SYS-CON Events announced today that Elastifile will exhibit at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 - Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Elastifile Cloud File System (ECFS) is software-defined data infrastructure designed for seamless and efficient management of dynamic workloads across heterogeneous environments. Elastifile provides the architecture needed to optimize your hybrid cloud environment, by facilitating efficient...
In his opening keynote at 20th Cloud Expo, Michael Maximilien, Research Scientist, Architect, and Engineer at IBM, discussed the full potential of the cloud and social data requires artificial intelligence. By mixing Cloud Foundry and the rich set of Watson services, IBM's Bluemix is the best cloud operating system for enterprises today, providing rapid development and deployment of applications that can take advantage of the rich catalog of Watson services to help drive insights from the vast t...
In his session at @ThingsExpo, Arvind Radhakrishnen discussed how IoT offers new business models in banking and financial services organizations with the capability to revolutionize products, payments, channels, business processes and asset management built on strong architectural foundation. The following topics were covered: How IoT stands to impact various business parameters including customer experience, cost and risk management within BFS organizations.
SYS-CON Events announced today that Golden Gate University will exhibit at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Since 1901, non-profit Golden Gate University (GGU) has been helping adults achieve their professional goals by providing high quality, practice-based undergraduate and graduate educational programs in law, taxation, business and related professions. Many of its courses are taug...
@DevOpsSummit at Cloud Expo taking place Oct 31 - Nov 2, 2017, at the Santa Clara Convention Center, Santa Clara, CA, is co-located with the 21st International Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world. The widespread success of cloud computing is driving the DevOps revolution in enterprise IT. Now as never before, development teams must communicate and collaborate in a dynamic, 24/7/365 environment. There is ...
WebRTC is great technology to build your own communication tools. It will be even more exciting experience it with advanced devices, such as a 360 Camera, 360 microphone, and a depth sensor camera. In his session at @ThingsExpo, Masashi Ganeko, a manager at INFOCOM Corporation, will introduce two experimental projects from his team and what they learned from them. "Shotoku Tamago" uses the robot audition software HARK to track speakers in 360 video of a remote party. "Virtual Teleport" uses a...
When shopping for a new data processing platform for IoT solutions, many development teams want to be able to test-drive options before making a choice. Yet when evaluating an IoT solution, it’s simply not feasible to do so at scale with physical devices. Building a sensor simulator is the next best choice; however, generating a realistic simulation at very high TPS with ease of configurability is a formidable challenge. When dealing with multiple application or transport protocols, you would be...
DevOps at Cloud Expo, taking place October 31 - November 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA, is co-located with 21st Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world. The widespread success of cloud computing is driving the DevOps revolution in enterprise IT. Now as never before, development teams must communicate and collaborate in a dynamic, 24/7/365 environment. There is no time to w...
While some vendors scramble to create and sell you a fancy solution for monitoring your spanking new Amazon Lambdas, hear how you can do it on the cheap using just built-in Java APIs yourself. By exploiting a little-known fact that Lambdas aren’t exactly single-threaded, you can effectively identify hot spots in your serverless code. In his session at @DevOpsSummit at 21st Cloud Expo, Dave Martin, Product owner at CA Technologies, will give a live demonstration and code walkthrough, showing how ...
Docker containers have brought great opportunities to shorten the deployment process through continuous integration and the delivery of applications and microservices. This applies equally to enterprise data centers as well as the cloud. In his session at 20th Cloud Expo, Jari Kolehmainen, founder and CTO of Kontena, discussed solutions and benefits of a deeply integrated deployment pipeline using technologies such as container management platforms, Docker containers, and the drone.io Cl tool. H...
SYS-CON Events announced today that DXWorldExpo has been named “Global Sponsor” of SYS-CON's 21st International Cloud Expo, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Digital Transformation is the key issue driving the global enterprise IT business. Digital Transformation is most prominent among Global 2000 enterprises and government institutions.
21st International Cloud Expo, taking place October 31 - November 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA, will feature technical sessions from a rock star conference faculty and the leading industry players in the world. Cloud computing is now being embraced by a majority of enterprises of all sizes. Yesterday's debate about public vs. private has transformed into the reality of hybrid cloud: a recent survey shows that 74% of enterprises have a hybrid cloud strategy. Me...