Welcome!

News Feed Item

NovaTorque, Inc. Expands Its Ultra Efficient PremiumPlus+™ ECPM Motor Line to the 2hp to 10hp Power Range

NovaTorque, Inc. (www.novatorque.com), a Fremont CA based producer of ultra efficient, cost-effective, electronically commutated permanent magnet motors, introduces 7.5hp and 10hp horsepower models of its PremiumPlus+™ motors. NovaTorque motors use low-cost ferrite magnets in an innovative flux-focusing design to deliver the superior efficiency of rare-earth permanent magnet motors at a price that is competitive with induction motors.

“NovaTorque’s new 7.5hp and 10hp versions, driven by variable frequency drives, boast motor-only rated point efficiency of over 94 percent, a full 3 point advantage over NEMA Premium induction motors. That advantage grows under partial load, as is the case in variable speed fan applications, with typical efficiency improvements ranging from 5% to 15%. In a high duty cycle 10hp fan application in an average cost of power area, annual energy cost savings can exceed $300,” says Scott Johnson, NovaTorque’s Vice President of Sales. “The advantage is even more dramatic when compared to the current installed base of induction motors, where efficiency improvements of 20 percent or more are achievable,” continues Johnson.

Importantly, due to its unique patented flux-focusing stator and rotor hub geometry, the NovaTorque motor produces this performance with an all-ferrite (versus rare earth) magnet design.

“The cost of rare earth (neodymium) magnet material, the basis of most conventional permanent magnet motors, has risen erratically over the last several years. Further, supply of rare earth magnets is increasingly uncertain. The ability to use ferrite magnets allows NovaTorque to price its motors comparable to induction motors. This means OEMs and HVAC systems builders can now economically deliver superior permanent magnet motor efficiency with modest first cost impact and a rapid payback,” explains Jaffer Hussain, NovaTorque’s Vice President of Marketing and Product Management.

NovaTorque PremiumPlus+™ motors are packaged in standard NEMA frame sizes and mounting dimensions for easy substitution of AC induction motors. NovaTorque PremiumPlus+™ motors are compatible with readily available variable frequency drives (VFDs) from most leading manufacturers, including ABB, Yaskawa, Mitsubishi, Siemens, Fuji, Hitachi, Toshiba, Delta, Danfoss, Schneider, Vacon and others.

For more information visit www.novatorque.com, call 510-933-2700, or email [email protected].

More Stories By Business Wire

Copyright © 2009 Business Wire. All rights reserved. Republication or redistribution of Business Wire content is expressly prohibited without the prior written consent of Business Wire. Business Wire shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon.

Latest Stories
NHK, Japan Broadcasting, will feature the upcoming @ThingsExpo Silicon Valley in a special 'Internet of Things' and smart technology documentary that will be filmed on the expo floor between November 3 to 5, 2015, in Santa Clara. NHK is the sole public TV network in Japan equivalent to the BBC in the UK and the largest in Asia with many award-winning science and technology programs. Japanese TV is producing a documentary about IoT and Smart technology and will be covering @ThingsExpo Silicon Val...
In his keynote at 19th Cloud Expo, Sheng Liang, co-founder and CEO of Rancher Labs, discussed the technological advances and new business opportunities created by the rapid adoption of containers. With the success of Amazon Web Services (AWS) and various open source technologies used to build private clouds, cloud computing has become an essential component of IT strategy. However, users continue to face challenges in implementing clouds, as older technologies evolve and newer ones like Docker c...
As DevOps methodologies expand their reach across the enterprise, organizations face the daunting challenge of adapting related cloud strategies to ensure optimal alignment, from managing complexity to ensuring proper governance. How can culture, automation, legacy apps and even budget be reexamined to enable this ongoing shift within the modern software factory?
DevOps is often described as a combination of technology and culture. Without both, DevOps isn't complete. However, applying the culture to outdated technology is a recipe for disaster; as response times grow and connections between teams are delayed by technology, the culture will die. A Nutanix Enterprise Cloud has many benefits that provide the needed base for a true DevOps paradigm. In his Day 3 Keynote at 20th Cloud Expo, Chris Brown, a Solutions Marketing Manager at Nutanix, will explore t...
Most technology leaders, contemporary and from the hardware era, are reshaping their businesses to do software in the hope of capturing value in IoT. Although IoT is relatively new in the market, it has already gone through many promotional terms such as IoE, IoX, SDX, Edge/Fog, Mist Compute, etc. Ultimately, irrespective of the name, it is about deriving value from independent software assets participating in an ecosystem as one comprehensive solution.
The age of Digital Disruption is evolving into the next era – Digital Cohesion, an age in which applications securely self-assemble and deliver predictive services that continuously adapt to user behavior. Information from devices, sensors and applications around us will drive services seamlessly across mobile and fixed devices/infrastructure. This evolution is happening now in software defined services and secure networking. Four key drivers – Performance, Economics, Interoperability and Trust ...
The goal of Continuous Testing is to shift testing left to find defects earlier and release software faster. This can be achieved by integrating a set of open source functional and performance testing tools in the early stages of your software delivery lifecycle. There is one process that binds all application delivery stages together into one well-orchestrated machine: Continuous Testing. Continuous Testing is the conveyor belt between the Software Factory and production stages. Artifacts are ...
DevOps is often described as a combination of technology and culture. Without both, DevOps isn't complete. However, applying the culture to outdated technology is a recipe for disaster; as response times grow and connections between teams are delayed by technology, the culture will die. A Nutanix Enterprise Cloud has many benefits that provide the needed base for a true DevOps paradigm.
Did you know that you can develop for mainframes in Java? Or that the testing and deployment can be automated across mobile to mainframe? In his session at @DevOpsSummit at 20th Cloud Expo, Vaughn Marshall, Sr. Principal Product Owner at CA Technologies, will discuss and demo how increasingly teams are developing with agile methodologies using modern development environments and automating testing and deployments, mobile to mainframe.
SYS-CON Events announced today that CollabNet, a global leader in enterprise software development, release automation and DevOps solutions, will be a Bronze Sponsor of SYS-CON's 20th International Cloud Expo®, taking place from June 6-8, 2017, at the Javits Center in New York City, NY. CollabNet offers a broad range of solutions with the mission of helping modern organizations deliver quality software at speed. The company’s latest innovation, the DevOps Lifecycle Manager (DLM), supports Value S...
SYS-CON Events announced today that Juniper Networks (NYSE: JNPR), an industry leader in automated, scalable and secure networks, will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Juniper Networks challenges the status quo with products, solutions and services that transform the economics of networking. The company co-innovates with customers and partners to deliver automated, scalable and secure network...
Five years ago development was seen as a dead-end career, now it’s anything but – with an explosion in mobile and IoT initiatives increasing the demand for skilled engineers. But apart from having a ready supply of great coders, what constitutes true ‘DevOps Royalty’? It’ll be the ability to craft resilient architectures, supportability, security everywhere across the software lifecycle. In his keynote at @DevOpsSummit at 20th Cloud Expo, Jeffrey Scheaffer, GM and SVP, Continuous Delivery Busine...
Bert Loomis was a visionary. This general session will highlight how Bert Loomis and people like him inspire us to build great things with small inventions. In their general session at 19th Cloud Expo, Harold Hannon, Architect at IBM Bluemix, and Michael O'Neill, Strategic Business Development at Nvidia, discussed the accelerating pace of AI development and how IBM Cloud and NVIDIA are partnering to bring AI capabilities to "every day," on-demand. They also reviewed two "free infrastructure" pr...
SYS-CON Events announced today that Hitachi, the leading provider the Internet of Things and Digital Transformation, will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Hitachi Data Systems, a wholly owned subsidiary of Hitachi, Ltd., offers an integrated portfolio of services and solutions that enable digital transformation through enhanced data management, governance, mobility and analytics. We help globa...
SYS-CON Events announced today that T-Mobile will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. As America's Un-carrier, T-Mobile US, Inc., is redefining the way consumers and businesses buy wireless services through leading product and service innovation. The Company's advanced nationwide 4G LTE network delivers outstanding wireless experiences to 67.4 million customers who are unwilling to compromise on ...