Welcome!

News Feed Item

MVG Launches the SARLite, a Smart, Compact and Fast SAR Measurement Device

Microwave Vision Group (Paris:ALMIC), leader in antenna measurement solutions, introduces SARLite, a new piece of measurement equipment that evaluates the Specific Absorption Rate (SAR) of wireless devices in a few seconds.

SAR is the quantity characterizing the absorption of electromagnetic wave energy from any type of radiating device such as a mobile phone, laptop, or a tablet PC into the human head or body.

SAR measurements are traditionally performed by using an electric field probe encased in a phantom (artificial head) filled with a liquid. The dielectric properties of the liquid are representative of head or body tissues. The probe is moved inside the phantom by a robot, making it possible to obtain discrete E-field values.

SARLite simplifies and accelerates the traditional SAR measurement method. With 265 probes and 651 sensors in a 3D matrix design, an area greater than 20 x 20 cm can be measured in only a few seconds. SARLite is capable of measuring a frequency bandwidth from 800 MHz to 3 GHz, without manipulation of the liquid, in this case, a wideband tissue simulant gel sealed inside the device. The sealed device also means no evaporation and no need to refill or replace the gel.

SARLite measures the E-field values emitted from mobile devices in order to tune electromagnetic radiation and is applicable at various stages in the R&D process.

SARLite can be used alone or as a complement to traditional SAR measurement systems to pre-test equipment in development, better preparing it for certification.

“Today, the number of protocols (4G, WiFi, WiMAX, Bluetooth, etc.) covering a wide range of frequency bands is increasing at an exponential rate. With this comes a significant increase in the time needed to measure SAR and obtain certification. The SARLite is a fast and compact solution. MVG drives to bring solutions that anticipate technological evolution and user needs. In this case, the development of SARLite presents the direction MVG is taking in this domain,” says Philippe Garreau, CEO of Microwave Vision.
Find out more : www.satimo.com/content/products/sarlite

About MICROWAVE VISION
MICROWAVE VISION Group – MVG – (NYSE-Euronext: ALMIC) is a leading global manufacturer of antenna test and measurement systems for the Telecommunications, Automotive, Defense and Aerospace industries, as well as for academic research. With the recent acquisition of REMC, specialists in shielded chambers for anechoic, EMC and screened room solutions, MVG offers the widest range and most innovative technology of its kind in the respective markets. The company brings together the high-precision electronic scanners developed by SATIMO using its “microwave vision” technology, ORBIT/FR products developed through a state-of-the-art technology of high-performance positioners and electromechanical scanners, AEMI high performing absorbing materials, and now REMC provider of specialized shielded chambers. MVG is located in 9 countries – France, Italy, Germany, UK, Sweden, USA, Israel, China, and Japan, and has more than 300 employees. The group boasts a wide client base including several large international companies. MVG achieved a turnover of € 46.2 million for the year end 31 December 2012. MVG has been awarded the OSEO certification “Innovative Company”. Alternext, code ISIN FR 0004058949 | For more information, visit: http://www.microwavevision.com

More Stories By Business Wire

Copyright © 2009 Business Wire. All rights reserved. Republication or redistribution of Business Wire content is expressly prohibited without the prior written consent of Business Wire. Business Wire shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon.

Latest Stories
From 2013, NTT Communications has been providing cPaaS service, SkyWay. Its customer’s expectations for leveraging WebRTC technology are not only typical real-time communication use cases such as Web conference, remote education, but also IoT use cases such as remote camera monitoring, smart-glass, and robotic. Because of this, NTT Communications has numerous IoT business use-cases that its customers are developing on top of PaaS. WebRTC will lead IoT businesses to be more innovative and address...
Connecting to major cloud service providers is becoming central to doing business. But your cloud provider’s performance is only as good as your connectivity solution. Massive Networks will place you in the driver's seat by exposing how you can extend your LAN from any location to include any cloud platform through an advanced high-performance connection that is secure and dedicated to your business-critical data. In his session at 21st Cloud Expo, Paul Mako, CEO & CIO of Massive Networks, wil...
When shopping for a new data processing platform for IoT solutions, many development teams want to be able to test-drive options before making a choice. Yet when evaluating an IoT solution, it’s simply not feasible to do so at scale with physical devices. Building a sensor simulator is the next best choice; however, generating a realistic simulation at very high TPS with ease of configurability is a formidable challenge. When dealing with multiple application or transport protocols, you would be...
Deep learning has been very successful in social sciences and specially areas where there is a lot of data. Trading is another field that can be viewed as social science with a lot of data. With the advent of Deep Learning and Big Data technologies for efficient computation, we are finally able to use the same methods in investment management as we would in face recognition or in making chat-bots. In his session at 20th Cloud Expo, Gaurav Chakravorty, co-founder and Head of Strategy Development ...
The goal of Continuous Testing is to shift testing left to find defects earlier and release software faster. This can be achieved by integrating a set of open source functional and performance testing tools in the early stages of your software delivery lifecycle. There is one process that binds all application delivery stages together into one well-orchestrated machine: Continuous Testing. Continuous Testing is the conveyer belt between the Software Factory and production stages. Artifacts are m...
As businesses adopt functionalities in cloud computing, it’s imperative that IT operations consistently ensure cloud systems work correctly – all of the time, and to their best capabilities. In his session at @BigDataExpo, Bernd Harzog, CEO and founder of OpsDataStore, presented an industry answer to the common question, “Are you running IT operations as efficiently and as cost effectively as you need to?” He then expounded on the industry issues he frequently came up against as an analyst, and ...
Cloud resources, although available in abundance, are inherently volatile. For transactional computing, like ERP and most enterprise software, this is a challenge as transactional integrity and data fidelity is paramount – making it a challenge to create cloud native applications while relying on RDBMS. In his session at 21st Cloud Expo, Claus Jepsen, Chief Architect and Head of Innovation Labs at Unit4, will explore that in order to create distributed and scalable solutions ensuring high availa...
SYS-CON Events announced today that App2Cloud will exhibit at SYS-CON's 21st International Cloud Expo®, which will take place on Oct. 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. App2Cloud is an online Platform, specializing in migrating legacy applications to any Cloud Providers (AWS, Azure, Google Cloud).
Historically, some banking activities such as trading have been relying heavily on analytics and cutting edge algorithmic tools. The coming of age of powerful data analytics solutions combined with the development of intelligent algorithms have created new opportunities for financial institutions. In his session at 20th Cloud Expo, Sebastien Meunier, Head of Digital for North America at Chappuis Halder & Co., discussed how these tools can be leveraged to develop a lasting competitive advantage ...
In his session at @DevOpsSummit at 20th Cloud Expo, Kelly Looney, director of DevOps consulting for Skytap, showed how an incremental approach to introducing containers into complex, distributed applications results in modernization with less risk and more reward. He also shared the story of how Skytap used Docker to get out of the business of managing infrastructure, and into the business of delivering innovation and business value. Attendees learned how up-front planning allows for a clean sep...
IoT is at the core or many Digital Transformation initiatives with the goal of re-inventing a company's business model. We all agree that collecting relevant IoT data will result in massive amounts of data needing to be stored. However, with the rapid development of IoT devices and ongoing business model transformation, we are not able to predict the volume and growth of IoT data. And with the lack of IoT history, traditional methods of IT and infrastructure planning based on the past do not app...
Enterprise architects are increasingly adopting multi-cloud strategies as they seek to utilize existing data center assets, leverage the advantages of cloud computing and avoid cloud vendor lock-in. This requires a globally aware traffic management strategy that can monitor infrastructure health across data centers and end-user experience globally, while responding to control changes and system specification at the speed of today’s DevOps teams. In his session at 20th Cloud Expo, Josh Gray, Chie...
Internet-of-Things discussions can end up either going down the consumer gadget rabbit hole or focused on the sort of data logging that industrial manufacturers have been doing forever. However, in fact, companies today are already using IoT data both to optimize their operational technology and to improve the experience of customer interactions in novel ways. In his session at @ThingsExpo, Gordon Haff, Red Hat Technology Evangelist, shared examples from a wide range of industries – including en...
In IT, we sometimes coin terms for things before we know exactly what they are and how they’ll be used. The resulting terms may capture a common set of aspirations and goals – as “cloud” did broadly for on-demand, self-service, and flexible computing. But such a term can also lump together diverse and even competing practices, technologies, and priorities to the point where important distinctions are glossed over and lost.
To get the most out of their data, successful companies are not focusing on queries and data lakes, they are actively integrating analytics into their operations with a data-first application development approach. Real-time adjustments to improve revenues, reduce costs, or mitigate risk rely on applications that minimize latency on a variety of data sources. Jack Norris reviews best practices to show how companies develop, deploy, and dynamically update these applications and how this data-first...