|By Marketwired .||
|January 20, 2014 08:30 AM EST||
CALGARY, ALBERTA -- (Marketwired) -- 01/20/14 -- Donnycreek Energy Inc. ("Donnycreek" or the "Company") (TSX VENTURE: DCK) provides an operations update for its activities in the Wapiti and Kakwa areas.
Wapiti Drilling Operations
Donnycreek has drilled and evaluated its 3,800 metre stratigraphic Montney exploration well at 13-26-64-8 W6M (the "13-26 Well"). Based on petrophysical analysis, the Company kicked off and is drilling a 1,600 metre long horizontal well in the middle Montney from 13-26 to 1-26-64-8 W6M (the "1-26 Well"). The 1-26 Well will be completed with a hydraulic stimulation scheduled for early March 2014. The Company's working interest in the 1-26 Well is 75%.
Donnycreek holds a 75% operated working interest in 328 gross (246 net) sections of Montney P&NG rights at Wapiti.
Kakwa Drilling Operations
Donnycreek has drilled and tested a sixth middle Montney natural gas well on its Kakwa block at 16-25-63-6 W6M (the "16-25 Well"). The initial gas rates and condensate yields from the 16-25 Well flow test are similar to the previous 5 middle Montney wells drilled on the Kakwa acreage. The 16-25 Well should be tied in and on production by mid-February 2014. The Company advises that production test results are not necessarily indicative of the long-term performance or of ultimate recovery.
The Company is currently conducting a fracture stimulation on its seventh middle Montney horizontal well at 16-17-63-5 W6M (the "16-17 Well"). Following a brief clean up period, and subject to results, the 16-17 Well should be tied in and brought on production by mid-February 2014.
An eighth middle Montney horizontal well is currently being drilled at 15- 30 -63-5 W6M (the "15-30 Well"). Upon rig release the drilling rig will remain on the same surface lease and commence drilling the Company's ninth horizontal well at 102/14- 30 -63-5 W6M (the "102/14-30 Well") which will be targeting the upper Montney. The program contemplates completing these wells consecutively once the 102/14-30 Well has finished drilling.
Kakwa Central Production Facility and Production
The Company's Kakwa central gas compression and condensate stabilization facility at 16-7-63-5 W6M (the "16-7 Facility") is now operational. The 16-7 Facility which has a design throughput of 15 mmcf/d of natural gas and 3,000 bbls/d of lease condensate is currently handling flush production rates of up to approximately 8 mmcf/d of natural gas and 1,200 bbls/d of lease condensate (4 mmcf/d and 600 bbls/d net) from the Company's previously reported four wells; 13-17-63-5 W6M, 14- 30 -63-5 W6M, 3-19-63-5 W6M and 5-23-63-6 W6M. The recent drilling, completion and construction activity required production from the producing wells to be shut in during the majority of December 2013 and early January 2014.
As previously reported Donnycreek and its partners intend to employ one rig year round at Kakwa and are currently permitting a new multi-well pad at 7-19-63-5 W6M and plans to drill two horizontal middle Montney wells between March and July, 2014. The program contemplates completing these wells consecutively once the second well has finished drilling.
Donnycreek holds a 50% working interest in all lands, wells and facilities on a 16.75 section block in the Kakwa area, except for the 13-17-63-5 W6M Well where the Company holds a 25% working interest plus 10% GORR before payout, 50% working interest after payout.
Kakwa 14-2-63-6 W6M (the "14-2 Well")
Adjoining the Company's 16.75 section Kakwa block discussed above, Donnycreek holds a 23.75% working interest in two additional sections. Donnycreek participated in the 14-2 upper Montney natural gas well that was tied-in in the fourth quarter of 2013 but was shut in for substantially all of November and December 2013 due to the operator's infrastructure restrictions. The 14-2 Well re-commenced production in January 2014 to help best determine a go-forward production strategy once a longer term performance profile has been developed and evaluated.
Donnycreek is a Calgary based public oil and gas company which holds approximately 438 gross (313 net) sections of petroleum and natural gas rights, with an average working interest of approximately 70%, prospective primarily for Montney liquid rich natural gas resource development all of which are located in the Deep Basin area of west-central Alberta.
Further information relating to Donnycreek is also available on its website at www.donnycreekenergy.com.
ON BEHALF OF THE BOARD OF DONNYCREEK ENERGY INC.
Malcolm F.W. Todd, President and Chief Executive Officer
ADVISORY ON FORWARD-LOOKING STATEMENTS: This news release contains certain forward-looking information and statements ("forward-looking statements") within the meaning of applicable securities laws. The use of any of the words "expect", "anticipate", "continue", "estimate", "may", "will", "project", "should", "believe", "plans", "intends" and similar expressions are intended to identify forward-looking statements. In particular, but without limiting the foregoing, this news release contains statements concerning the timing of the hydraulic stimulation of the 1-26 Well, the timing of the tie in of and production from the 16-25 Well and the 15-30 Well, the drilling of the Company's ninth horizontal well, the drilling and completion of two Kakwa horizontal wells from a multi-well pad and the primary prospective zone for development on the Company's lands.
Forward-looking statements are based on a number of material factors, expectations or assumptions of Donnycreek which have been used to develop such statements and information but which may prove to be incorrect. Although Donnycreek believes that the expectations reflected in these forward-looking statements are reasonable, undue reliance should not be placed on them because Donnycreek can give no assurance that they will prove to be correct. Since forward-looking statements address future events and conditions, by their very nature they involve inherent risks and uncertainties. Further, events or circumstances may cause actual results to differ materially from those predicted as a result of numerous known and unknown risks, uncertainties, and other factors, many of which are beyond the control of the Company, including, without limitation: whether the Company's exploration and development activities respecting its prospects will be successful or that material volumes of petroleum and natural gas reserves will be encountered, or if encountered can be produced on a commercial basis; the ultimate size and scope of any hydrocarbon bearing formations on its lands; that drilling operations on its lands will be successful such that further development activities in these areas are warranted; that Donnycreek will continue to conduct its operations in a manner consistent with past operations; results from drilling and development activities will be consistent with past operations; the general stability of the economic and political environment in which Donnycreek operates; drilling results; field production rates and decline rates; the general continuance of current industry conditions; the timing and cost of pipeline, storage and facility construction and expansion and the ability of Donnycreek to secure adequate product transportation;
future commodity prices; currency, exchange and interest rates; regulatory framework regarding royalties, taxes and environmental matters in the jurisdictions in which Donnycreek operates; and the ability of Donnycreek to successfully market its oil and natural gas products; changes in commodity prices; changes in the demand for or supply of the Company's products; unanticipated operating results or production declines; changes in tax or environmental laws, changes in development plans of Donnycreek or by third party operators of Donnycreek's properties, increased debt levels or debt service requirements; inaccurate estimation of Donnycreek's oil and gas reserve and resource volumes; limited, unfavourable or a lack of access to capital markets; increased costs; a lack of adequate insurance coverage; the impact of competitors; and certain other risks detailed from time-to-time in Donnycreek's public disclosure documents. Additional information regarding some of these risks, expectations or assumptions and other factors may be found under in the Company's Annual Information Form for the year ended July 31, 2013 and the Company's Management's Discussion and Analysis prepared for the year ended July 31, 2013. The reader is cautioned not to place undue reliance on these forward-looking statements. The forward-looking statements contained in this news release are made as of the date hereof and Donnycreek undertakes no obligations to update publicly or revise any forward-looking statements, whether as a result of new information, future events or otherwise, unless so required by applicable securities laws.
In this news release the calculation of barrels of oil equivalent (boe) is calculated at a conversion rate of six thousand cubic feet (6 mcf) of natural gas for one barrel (bbl) of oil based on an energy equivalency conversion method. Boes may be misleading particularly if used in isolation. A boe conversion ratio of 6 mcf: 1 bbl is based on an energy equivalency conversion method primarily applicable to the burner tip and does not represent a value equivalency at the wellhead. Given that the value ratio based on the current price of crude oil as compared to natural gas is significantly different from the energy equivalency of 6:1, utilizing a conversion on a 6:1 basis may be misleading as an indication of value.
NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS NEWS RELEASE.
Donnycreek Energy Inc.
President and Chief Executive Officer
(604) 684-4265 (FAX)
There is an ever-growing explosion of new devices that are connected to the Internet using “cloud” solutions. This rapid growth is creating a massive new demand for efficient access to data. And it’s not just about connecting to that data anymore. This new demand is bringing new issues and challenges and it is important for companies to scale for the coming growth. And with that scaling comes the need for greater security, gathering and data analysis, storage, connectivity and, of course, the...
May. 4, 2016 03:30 AM EDT Reads: 1,131
The IoTs will challenge the status quo of how IT and development organizations operate. Or will it? Certainly the fog layer of IoT requires special insights about data ontology, security and transactional integrity. But the developmental challenges are the same: People, Process and Platform. In his session at @ThingsExpo, Craig Sproule, CEO of Metavine, will demonstrate how to move beyond today's coding paradigm and share the must-have mindsets for removing complexity from the development proc...
May. 4, 2016 03:00 AM EDT Reads: 777
Redis is not only the fastest database, but it has become the most popular among the new wave of applications running in containers. Redis speeds up just about every data interaction between your users or operational systems. In his session at 18th Cloud Expo, Dave Nielsen, Developer Relations at Redis Labs, will shares the functions and data structures used to solve everyday use cases that are driving Redis' popularity.
May. 4, 2016 12:45 AM EDT Reads: 1,180
Much of the value of DevOps comes from a (renewed) focus on measurement, sharing, and continuous feedback loops. In increasingly complex DevOps workflows and environments, and especially in larger, regulated, or more crystallized organizations, these core concepts become even more critical. In his session at @DevOpsSummit at 18th Cloud Expo, Andi Mann, Chief Technology Advocate at Splunk, will show how, by focusing on 'metrics that matter,' you can provide objective, transparent, and meaningfu...
May. 3, 2016 11:45 PM EDT Reads: 1,010
Many private cloud projects were built to deliver self-service access to development and test resources. While those clouds delivered faster access to resources, they lacked visibility, control and security needed for production deployments. In their session at 18th Cloud Expo, Steve Anderson, Product Manager at BMC Software, and Rick Lefort, Principal Technical Marketing Consultant at BMC Software, will discuss how a cloud designed for production operations not only helps accelerate developer...
May. 3, 2016 11:30 PM EDT Reads: 1,237
Artificial Intelligence has the potential to massively disrupt IoT. In his session at 18th Cloud Expo, AJ Abdallat, CEO of Beyond AI, will discuss what the five main drivers are in Artificial Intelligence that could shape the future of the Internet of Things. AJ Abdallat is CEO of Beyond AI. He has over 20 years of management experience in the fields of artificial intelligence, sensors, instruments, devices and software for telecommunications, life sciences, environmental monitoring, process...
May. 3, 2016 11:00 PM EDT Reads: 1,210
Manufacturers are embracing the Industrial Internet the same way consumers are leveraging Fitbits – to improve overall health and wellness. Both can provide consistent measurement, visibility, and suggest performance improvements customized to help reach goals. Fitbit users can view real-time data and make adjustments to increase their activity. In his session at @ThingsExpo, Mark Bernardo Professional Services Leader, Americas, at GE Digital, will discuss how leveraging the Industrial Interne...
May. 3, 2016 11:00 PM EDT Reads: 1,293
Increasing IoT connectivity is forcing enterprises to find elegant solutions to organize and visualize all incoming data from these connected devices with re-configurable dashboard widgets to effectively allow rapid decision-making for everything from immediate actions in tactical situations to strategic analysis and reporting. In his session at 18th Cloud Expo, Shikhir Singh, Senior Developer Relations Manager at Sencha, will discuss how to create HTML5 dashboards that interact with IoT devic...
May. 3, 2016 10:00 PM EDT Reads: 1,324
The IETF draft standard for M2M certificates is a security solution specifically designed for the demanding needs of IoT/M2M applications. In his session at @ThingsExpo, Brian Romansky, VP of Strategic Technology at TrustPoint Innovation, will explain how M2M certificates can efficiently enable confidentiality, integrity, and authenticity on highly constrained devices.
May. 3, 2016 10:00 PM EDT Reads: 1,212
We're entering the post-smartphone era, where wearable gadgets from watches and fitness bands to glasses and health aids will power the next technological revolution. With mass adoption of wearable devices comes a new data ecosystem that must be protected. Wearables open new pathways that facilitate the tracking, sharing and storing of consumers’ personal health, location and daily activity data. Consumers have some idea of the data these devices capture, but most don’t realize how revealing and...
May. 3, 2016 09:45 PM EDT Reads: 346
SYS-CON Events announced today that Ericsson has been named “Gold Sponsor” of SYS-CON's @ThingsExpo, which will take place on June 7-9, 2016, at the Javits Center in New York, New York. Ericsson is a world leader in the rapidly changing environment of communications technology – providing equipment, software and services to enable transformation through mobility. Some 40 percent of global mobile traffic runs through networks we have supplied. More than 1 billion subscribers around the world re...
May. 3, 2016 08:45 PM EDT Reads: 1,284
In the world of DevOps there are ‘known good practices’ – aka ‘patterns’ – and ‘known bad practices’ – aka ‘anti-patterns.' Many of these patterns and anti-patterns have been developed from real world experience, especially by the early adopters of DevOps theory; but many are more feasible in theory than in practice, especially for more recent entrants to the DevOps scene. In this power panel at @DevOpsSummit at 18th Cloud Expo, moderated by DevOps Conference Chair Andi Mann, panelists will dis...
May. 3, 2016 08:45 PM EDT Reads: 972
We’ve worked with dozens of early adopters across numerous industries and will debunk common misperceptions, which starts with understanding that many of the connected products we’ll use over the next 5 years are already products, they’re just not yet connected. With an IoT product, time-in-market provides much more essential feedback than ever before. Innovation comes from what you do with the data that the connected product provides in order to enhance the customer experience and optimize busi...
May. 3, 2016 08:30 PM EDT Reads: 1,211
The increasing popularity of the Internet of Things necessitates that our physical and cognitive relationship with wearable technology will change rapidly in the near future. This advent means logging has become a thing of the past. Before, it was on us to track our own data, but now that data is automatically available. What does this mean for mHealth and the "connected" body? In her session at @ThingsExpo, Lisa Calkins, CEO and co-founder of Amadeus Consulting, will discuss the impact of wea...
May. 3, 2016 08:00 PM EDT Reads: 1,057