Welcome!

News Feed Item

Petrotech Oil and Gas Announces 18 Well Drilling Program

BEDFORD, Texas, January 24, 2014 /PRNewswire/ --

PetroTech Oil and Gas Inc. (OTC: PTOG) (the "Company" or Petrotech") today announces the current Brown has recently been revaluated by a geologist that specializes in the Nowata, Oklahoma area and the company has initiated an expansion of the original development plan for the lease. The current evaluation disclosed a well-known oil-producing zone under the lease. The proposed 18 well drilling program will also include five of the existing wells to be converted to injection wells. The company will inject water as well as gas and CO2 back into the zone to enhance production. It is estimated that there are 40,000 barrels of recoverable oil under the lease. The first well scheduled to be drilled next week will allow the company to test various injection methodologies.

The key to success in this area of Oklahoma is optimizing production from the many hydrocarbon-bearing zones, which includes the coal seams. With most wells encountering about a dozen zones that have known production in this area, the drilling risk is extremely low. Having this serendipity also extends the production life of wells from 10-12 years to 15-20 years.

Production rates in this area range from 2 to 50 barrels of oil per day (BOPD) per well with typical results averaging between 5 and 10 BOPD. Initial flow rates can be higher for a short duration before settling into this range with the quality of crude being excellent (33° to 42° API oil). Natural gas is the fallback position in this area due to shallow Excello shale that blankets the area as do several methane gas bearing coal seams. As such, natural gas is almost always produced in a well in this area with production rates ranging from 5,000 to 200,000 cubic feet of gas per day (5 to 200 MCFD).

Since most of this gas is produced from coal seams, initial production rates are actually lower and increase over the first few months because coal seams must "dewater," where water in place in the coal seam is brought to the surface, freeing up the gas to begin coming to surface through the well bore. As a result, a typical scenario would be for a well to produce from a coal seam and after dewatering for about a month to start giving up its natural gas. The flow rate of between 950 to 1050 BTU gas will usually start around 5 MCFD and increases as the water comes off with most wells settling in around 30-50 MCFD. In PTOG's project area, there is an estimated 98% completion rate and 100% discovery of gas, making it one of the lowest risk exploration areas in the country.

Located in Nowata County, Oklahoma, this project is situated on the Northeastern edge of the Northeast Oklahoma Shelf, which has proven to be prolific in coal bed seams for both methane gas and oil since it was developed beginning in the early 1990s. The dewatering of the existing gas wells will be injected back into the Bartlesville production zone to help facilitate the oil production.

"This recent re-evaluation of the lease adds reserves and new production we underestimated in our original purchase. We have acquired this initial 80-acre project with another 480 acres targeted on the area.  We are already seeing increased gas production from the initial dewatering of the gas wells and expect favorable result from the newly drilled wells," stated Eddie Schilb, president of PTOG.

About The Nowata Lease:

The key to success in this area of Oklahoma is optimizing production from the many hydrocarbon-bearing zones, which includes the coal seams. With most wells encountering about a dozen zones that have known production in this area, the drilling risk is extremely low. Having this serendipity also extends the production life of wells from 10-12 years to 15-20 years.

Production rates in this area range from 2 to 50 barrels of oil per day (BOPD) per well with typical results averaging between 5 and 10 BOPD. Initial flow rates can be higher for a short duration before settling into this range with the quality of crude being excellent (33° to 42° API oil). Natural gas is the fallback position in this area due to shallow Excello shale that blankets the area as do several methane gas bearing coal seams. As such, natural gas is almost always produced in a well in this area with production rates ranging from 5,000 to 200,000 cubic feet of gas per day (5 to 200 MCFD).

Since most of this gas is produced from coal seams, initial production rates are actually lower and increase over the first few months because coal seams must "dewater," where water in place in the coal seam is brought to the surface freeing up the gas to begin coming to surface through the well bore. As a result, a typical scenario would be for a well to produce from a coal seam and after dewatering for about a month to start giving up its natural gas. The flow rate of between 950 to 1050 BTU gas will usually start around 5 MCFD and increases as the water comes off with most wells settling in around 30-50 MCFD. In PETROTECH OIL AND GAS, INC.'s project area, there is an estimated 98% completion rate and 100% discovery of gas, making it one of the lowest risk exploration areas in the country.

Located in Nowata County, Oklahoma, this project is situated on the Northeastern edge of the Northeast Oklahoma Shelf, which has proven to be prolific in coal bed methane gas since it was developed beginning in the early 1990s. PETROTECH OIL AND GAS, INC.'s properties are surrounded by leases operated by some of the major players in the field such as Newfield Exploration, Mid-Continent, Inc. (NYSE:NFX), Energy Quest Resources and Endeavor Energy. In fact, PETROTECH OIL AND GAS, INC.  Have minority interests in some wells with Newfield Exploration and Endeavor. This area of northeastern Oklahoma has an extensive drilling history extending back to the early 1900s.

About PetroTech:

PetroTech Oil and Gas, Inc. uses multiple patent technologies for Enhanced Oil Recovery and in some cases will use their new pumping system co developed by PetroTech. We will use this patented technology with other proven technologies currently used in the industry to drill, complete equip new drill wells and older wells with secondary production opportunities. Throughout the United States there are primary depleted oil reservoirs representing billions of barrels of oil that lend themselves to the use and exploitation of Enhanced Oil Recovery and PetroTech Oil and Gas, Inc.'s proven patented technology. Without EOR technology, these reservoirs will produce only about 20% of their Original Oil in Place. Gas injection EOR is a proven method that has been in use over the last 50 years in the oil fields of West Texas, Kansas, Oklahoma, Michigan, Wyoming and Oklahoma. Starting in the late 1990's we started researching various EOR methods and sources of gases and mixtures of gases to find an alternative gas to pure CO2 for EOR. In doing so, we found that a N2-CO2 mixture was 2-3 times more efficient than CO2 in the recovery of stranded oil. Recently we have been introduced to a patented exhaust unit that was more efficient than regular CO2. A new prototype of that equipment was then built for injection purposes; and is in the process of being further developed for commercial use.

We have analyzed the different types of oil producing reservoirs in most of the major geological basins in the United States and have determined that the use of our process and method will enhance the recovery of stranded oil reserves in these areas that otherwise may never be produced. The pinnacle reefs, other reefs in Texas make excellent reservoirs for EOR because they are compact, have consistent reservoir properties, thick pay columns, and are overlain by an impermeable cap seal. However other formations have responded favorably as well. These reservoirs represent over 300 million barrels of recoverable stranded oil using our patented method and technology. CO2 floods have been successful on the reefs in the US with rates as high as 1000 BOPD. Our process will have a major impact on the recovery of stranded oil in U.S. basins. This statement is based on the fact that we have an unlimited source of gas and we do not need an expensive infrastructure to transport the gas, plus the fact that it is proven that a mixture of CO2 and N2 is more efficient than CO2 in some trials.

The cost and recovery of a project will be dependent on size of structure and depth; the cost will range depending on type of formation and type of treatment design. Hopefully, per project we will capture an additional 20% to 40% of oil in place. Attempting to do this in a period of 5 years as opposed to the original 20% of oil that has already been produced; which may have taken ten to twenty years. Each successful project is estimated to have a six to twelve month payout.

For more information please go to our websites, which can be found at: http://petrotechog.com

Certain information discussed in this press release may constitute forward-looking statements within the Private Securities Litigation Reform Act of 1995 and the federal securities laws. Although the Company believes that the expectations reflected in such forward-looking statements are based upon reasonable assumptions at the time made, it can give no assurance that its expectations will be achieved. Readers are cautioned not to place undue reliance on these forward-looking statements. Forward-looking statements are inherently subject to unpredictable and unanticipated risks, trends and uncertainties such as the Company's inability to accurately forecast its operating results; the Company's potential inability to achieve profitability or generate positive cash flow; the availability of financing; and other risks associated with the Company's business. The Company assumes no obligation to update or supplement forward-looking statements that become untrue because of subsequent events.

Website: http://www.petrotechog.com

Phone: +1-888-568-7111 Email: [email protected]

Investor Relations: Gabriel Rodriguez, E Relations Group, +1-888-261-6537

SOURCE PetroTech Oil and Gas, Inc.

More Stories By PR Newswire

Copyright © 2007 PR Newswire. All rights reserved. Republication or redistribution of PRNewswire content is expressly prohibited without the prior written consent of PRNewswire. PRNewswire shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon.

Latest Stories
SYS-CON Events announced today that DatacenterDynamics has been named “Media Sponsor” of SYS-CON's 18th International Cloud Expo, which will take place on June 7–9, 2016, at the Javits Center in New York City, NY. DatacenterDynamics is a brand of DCD Group, a global B2B media and publishing company that develops products to help senior professionals in the world's most ICT dependent organizations make risk-based infrastructure and capacity decisions.
SYS-CON Events announced today TMCnet has been named “Media Sponsor” of SYS-CON's 18th International Cloud Expo, which will take place on June 7–9, 2016, at the Javits Center in New York City, NY, and the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Technology Marketing Corporation (TMC) is the world's leading business-to-business and integrated marketing media company, servicing niche markets within the com...
Between the mockups and specs produced by analysts, and resulting applications built by developers, there exists a gulf where projects fail, costs spiral, and applications disappoint. Methodologies like Agile attempt to address this with intensified communication, with partial success but many limitations. In his session at 18th Cloud Expo, Charles Kendrick, CTO & Chief Architect at Isomorphic Software, will present a revolutionary model enabled by new technologies. Learn how business and devel...
Unless you don’t use the internet, don’t live in California, or haven’t been paying attention to the recent news… you should be aware that self-driving cars are on their way to becoming a reality. I have seen them – they are real. If you believe in the future reality of self-driving cars, then continue reading on. If you don’t believe in the future possibilities, then I am not sure what to do to convince you other than discuss the very real changes that will roll out with the consumer producti...
If there is anything we have learned by now, is that every business paves their own unique path for releasing software- every pipeline, implementation and practices are a bit different, and DevOps comes in all shapes and sizes. Software delivery practices are often comprised of set of several complementing (or even competing) methodologies – such as leveraging Agile, DevOps and even a mix of ITIL, to create the combination that’s most suitable for your organization and that maximize your busines...
In the rush to compete in the digital age, a successful digital transformation is essential, but many organizations are setting themselves up for failure. There’s a common misconception that the process is just about technology, but it’s not. It’s about your business. It shouldn’t be treated as an isolated IT project; it should be driven by business needs with the committed involvement of a range of stakeholders.
Struggling to keep up with increasing application demand? Learn how Platform as a Service (PaaS) can streamline application development processes and make resource management easy.
New Relic, Inc. has announced a set of new features across the New Relic Software Analytics Cloud that offer IT operations teams increased visibility, and the ability to diagnose and resolve performance problems quickly. The new features further IT operations teams’ ability to leverage data and analytics, as well as drive collaboration and a common, shared understanding between teams. Software teams are under pressure to resolve performance issues quickly and improve availability, as the comple...
The IoT has the potential to create a renaissance of manufacturing in the US and elsewhere. In his session at 18th Cloud Expo, Florent Solt, CTO and chief architect of Netvibes, will discuss how the expected exponential increase in the amount of data that will be processed, transported, stored, and accessed means there will be a huge demand for smart technologies to deliver it. Florent Solt is the CTO and chief architect of Netvibes. Prior to joining Netvibes in 2007, he co-founded Rift Technol...
SYS-CON Events announced today that Enzu, a leading provider of cloud hosting solutions, will exhibit at SYS-CON's 18th International Cloud Expo®, which will take place on June 7-9, 2016, at the Javits Center in New York City, NY. Enzu’s mission is to be the leading provider of enterprise cloud solutions worldwide. Enzu enables online businesses to use its IT infrastructure to their competitive advantage. By offering a suite of proven hosting and management services, Enzu wants companies to foc...
Many private cloud projects were built to deliver self-service access to development and test resources. While those clouds delivered faster access to resources, they lacked visibility, control and security needed for production deployments. In their session at 18th Cloud Expo, Steve Anderson, Product Manager at BMC Software, and Rick Lefort, Principal Technical Marketing Consultant at BMC Software, will discuss how a cloud designed for production operations not only helps accelerate developer...
Join IBM June 8 at 18th Cloud Expo at the Javits Center in New York City, NY, and learn how to innovate like a startup and scale for the enterprise. You need to deliver quality applications faster and cheaper, attract and retain customers with an engaging experience across devices, and seamlessly integrate your enterprise systems. And you can't take 12 months to do it.
This is not a small hotel event. It is also not a big vendor party where politicians and entertainers are more important than real content. This is Cloud Expo, the world's longest-running conference and exhibition focused on Cloud Computing and all that it entails. If you want serious presentations and valuable insight about Cloud Computing for three straight days, then register now for Cloud Expo.
The proper isolation of resources is essential for multi-tenant environments. The traditional approach to isolate resources is, however, rather heavyweight. In his session at 18th Cloud Expo, Igor Drobiazko, co-founder of elastic.io, will draw upon their own experience with operating a Docker container-based infrastructure on a large scale and present a lightweight solution for resource isolation using microservices. He will also discuss the implementation of microservices in data and applicat...
Based on the open source Cloud Foundry technology, IBM Bluemix is an open-standard, cloud-based platform for building, managing, and running applications of all types such as web, mobile, Big Data, and new smart devices. Bluemix abstracts and hides most of the complexities that are associated with hosting and managing cloud-based applications. As an application developer, you can focus on developing your application without having to manage the infrastructure that is required to host it. For mob...