Welcome!

News Feed Item

Kansas City Facial Plastic Surgeon Describes the Typical Facelift Patient

Dr. J. David Kriet Outlines Common Attributes of the Average Facelift Patient and Discusses the Presurgical Approach He and Dr. Clinton D. Humphrey Take at University of Kansas Facial Plastic and Reconstructive Surgery

KANSAS CITY, KS -- (Marketwired) -- 01/28/14 -- According to the most recent statistics published by the American Society for Aesthetic Plastic Surgery, over 10 million cosmetic procedures were performed in the U.S. in 2012; a 3% increase from the previous year. With an interest in cosmetic enhancement still trending upward, Kansas City facial plastic surgeons J. David Kriet, MD and Clinton D. Humphrey, MD perform facelift surgery as one of the most popular procedures at University of Kansas Facial Plastic and Reconstructive Surgery.

In a recent blog post on their website titled, "Is Facelift Surgery Right for Me?", Dr. Kriet discusses typical candidates for facelift surgery, as well as his approach to establishing expectations. According to the post, the following are some commonalities shared by his average facelift patients:

  • Healthy
  • Stable weight
  • Between 48 and 75 years of age
  • Presence of facial skin laxity
  • Appearance of stubborn fatty deposits around the face and neck

The Kansas City facial plastic surgeon says many of his patients begin considering facial rejuvenation in their mid-40's but typically only pursue non-surgical treatment options like BOTOX® Cosmetic and dermal fillers at that time. However, once those same patients reach their late 40's to early 50's, he notes that they often transition into considering surgical options such as the facelift. Furthermore, he adds that many patients opt to maximize the results of their facelift by combining both surgical and non-surgical procedures.

When asked about his approach to helping patients determine realistic goals and expectations for their facelift surgery, Dr. Kriet answers:

"During the initial consultation, a conversation regarding goals and expectations takes place. In most cases, we come to a mutual agreement with the patient on the treatment plan at this initial visit. We will then often have one or two additional consultations to confirm expectations and answer any questions the patient may have. Our goal is for every patient to feel like their needs have been met with our care."

Dr. Kriet also states, "Every patient is unique, and the facelift is modified accordingly for skin thickness, the presence of neck bands, fat accumulations, hairline position, chin position, and jawline." Ultimately, he urges anyone interested in the procedure to seek a board-certified facial plastic surgeon in order to help ensure the utmost degrees of safety and efficacy are achieved.

About J. David Kriet, MD, FACS
Dr. Kriet earned his medical degree at the University of Oklahoma College of Medicine and later continued his medical training at both the University of Washington and the Oregon Health and Sciences University. A leader in his field, Dr. Kriet remains dedicated to the medical community through lecturing, educating other surgeons, and contributing articles to prestigious medical journals. He also participates in FACE TO FACE, an organization designed to help victims of domestic violence through complementary surgery. He is available for interview upon request.

About Clinton D. Humphrey, MD, FACS
Dr. Humphrey earned his medical degree from the University of Missouri School of Medicine and received extensive surgical training from the University of Kansas Medical Center and the University of Illinois-Chicago Medical Center. Dr. Humphrey remains devoted to the medical field by lecturing nationally and contributing his research on facial plastic surgery to leading medical journals. He also enjoys volunteering around the world -- he provides medical care to impoverished populations lacking access to proper medical care, including the people of Honduras, Mexico, and the Philippines. He is available for interview upon request.

For more information about Drs. Kriet and Humphrey, visit kufacialplasticsurgery.com.

To view the original source of this press release, visit: http://www.kufacialplasticsurgery.com/practice-news/kansas-city-facial-plastic-surgeon-describes-the-typical-facelift-patient/.

Image Available: http://www2.marketwire.com/mw/frame_mw?attachid=2505285

Add to Digg Bookmark with del.icio.us Add to Newsvine

University of Kansas Facial Plastic and Reconstructive Surgery
KU Medical Center
3901 Rainbow Blvd.
Kansas City, KS 66160
(913) 871-9785

Rosemont Media
Email Contact
858-200-0044
www.rosemontmedia.com

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
SYS-CON Events announced today that Hitrons Solutions will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Hitrons Solutions Inc. is distributor in the North American market for unique products and services of small and medium-size businesses, including cloud services and solutions, SEO marketing platforms, and mobile applications.
SYS-CON Events announced today that eCube Systems, a leading provider of middleware modernization, integration, and management solutions, will exhibit at @DevOpsSummit at 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. eCube Systems offers a family of middleware evolution products and services that maximize return on technology investment by leveraging existing technical equity to meet evolving business needs. ...
SYS-CON Events announced today Telecom Reseller has been named “Media Sponsor” of SYS-CON's 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Telecom Reseller reports on Unified Communications, UCaaS, BPaaS for enterprise and SMBs. They report extensively on both customer premises based solutions such as IP-PBX as well as cloud based and hosted platforms.
Pulzze Systems was happy to participate in such a premier event and thankful to be receiving the winning investment and global network support from G-Startup Worldwide. It is an exciting time for Pulzze to showcase the effectiveness of innovative technologies and enable them to make the world smarter and better. The reputable contest is held to identify promising startups around the globe that are assured to change the world through their innovative products and disruptive technologies. There w...
SYS-CON Events announced today that Isomorphic Software will exhibit at DevOps Summit at 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Isomorphic Software provides the SmartClient HTML5/AJAX platform, the most advanced technology for building rich, cutting-edge enterprise web applications for desktop and mobile. SmartClient combines the productivity and performance of traditional desktop software with the simp...
With so much going on in this space you could be forgiven for thinking you were always working with yesterday’s technologies. So much change, so quickly. What do you do if you have to build a solution from the ground up that is expected to live in the field for at least 5-10 years? This is the challenge we faced when we looked to refresh our existing 10-year-old custom hardware stack to measure the fullness of trash cans and compactors.
Extreme Computing is the ability to leverage highly performant infrastructure and software to accelerate Big Data, machine learning, HPC, and Enterprise applications. High IOPS Storage, low-latency networks, in-memory databases, GPUs and other parallel accelerators are being used to achieve faster results and help businesses make better decisions. In his session at 18th Cloud Expo, Michael O'Neill, Strategic Business Development at NVIDIA, focused on some of the unique ways extreme computing is...
The emerging Internet of Everything creates tremendous new opportunities for customer engagement and business model innovation. However, enterprises must overcome a number of critical challenges to bring these new solutions to market. In his session at @ThingsExpo, Michael Martin, CTO/CIO at nfrastructure, outlined these key challenges and recommended approaches for overcoming them to achieve speed and agility in the design, development and implementation of Internet of Everything solutions wi...
Cloud computing is being adopted in one form or another by 94% of enterprises today. Tens of billions of new devices are being connected to The Internet of Things. And Big Data is driving this bus. An exponential increase is expected in the amount of information being processed, managed, analyzed, and acted upon by enterprise IT. This amazing is not part of some distant future - it is happening today. One report shows a 650% increase in enterprise data by 2020. Other estimates are even higher....
With over 720 million Internet users and 40–50% CAGR, the Chinese Cloud Computing market has been booming. When talking about cloud computing, what are the Chinese users of cloud thinking about? What is the most powerful force that can push them to make the buying decision? How to tap into them? In his session at 18th Cloud Expo, Yu Hao, CEO and co-founder of SpeedyCloud, answered these questions and discussed the results of SpeedyCloud’s survey.
Today we can collect lots and lots of performance data. We build beautiful dashboards and even have fancy query languages to access and transform the data. Still performance data is a secret language only a couple of people understand. The more business becomes digital the more stakeholders are interested in this data including how it relates to business. Some of these people have never used a monitoring tool before. They have a question on their mind like “How is my application doing” but no id...
Actian Corporation has announced the latest version of the Actian Vector in Hadoop (VectorH) database, generally available at the end of July. VectorH is based on the same query engine that powers Actian Vector, which recently doubled the TPC-H benchmark record for non-clustered systems at the 3000GB scale factor (see tpc.org/3323). The ability to easily ingest information from different data sources and rapidly develop queries to make better business decisions is becoming increasingly importan...
The 19th International Cloud Expo has announced that its Call for Papers is open. Cloud Expo, to be held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA, brings together Cloud Computing, Big Data, Internet of Things, DevOps, Digital Transformation, Microservices and WebRTC to one location. With cloud computing driving a higher percentage of enterprise IT budgets every year, it becomes increasingly important to plant your flag in this fast-expanding business opportuni...
Qosmos has announced new milestones in the detection of encrypted traffic and in protocol signature coverage. Qosmos latest software can accurately classify traffic encrypted with SSL/TLS (e.g., Google, Facebook, WhatsApp), P2P traffic (e.g., BitTorrent, MuTorrent, Vuze), and Skype, while preserving the privacy of communication content. These new classification techniques mean that traffic optimization, policy enforcement, and user experience are largely unaffected by encryption. In respect wit...
Deploying applications in hybrid cloud environments is hard work. Your team spends most of the time maintaining your infrastructure, configuring dev/test and production environments, and deploying applications across environments – which can be both time consuming and error prone. But what if you could automate provisioning and deployment to deliver error free environments faster? What could you do with your free time?