Welcome!

News Feed Item

Red Pine Intersects 27 meters of 8% Zinc Including 12.7 meters of 13.6% Zinc

TORONTO, ONTARIO -- (Marketwired) -- 01/28/14 -- Red Pine Exploration Inc. (the "Company") (TSX VENTURE: RPX) announces results from its late December-2013 drill program on the Cayenne-Chili Property.

Volcanogenic-Massive- Sulphide ("VMS") Occurrence Intersected

Mechanized trenching conducted in July 2013 exposed an area of massive sulphides consisting of sphalerite (zinc), galena (lead), and veins of chalcopyrite (copper) immediately west of the historic VenCan Zinc showing. In late December 2013, the Company drilled its initial 3 drill holes, which were collared to explore this area and are numbered as CC13-01, CC13-02 and CC13-03.

All the drill holes intersected stockwork or feeder mineralization. Holes 1 and 2 were drilled in close proximity and hole 3 was drilled approximately 120 metres to the northeast. The significant assay results included Hole 1, which intersected 27.47 metres of 8.02% zinc and Hole 2, which intersected 16.44 metres of 3.63% zinc.

Significant assay results are presented below:

----------------------------------------------------------------------------
                             Length(i)   Zinc % Copper %   Lead % Silver g/t
Borehole    From (m)  To (m)       (m)     (Zn)     (Cu)     (Pb)       (Ag)
----------------------------------------------------------------------------
CC13-01           11   38.47     27.47     8.02     0.34     1.00       8.48
----------------------------------------------------------------------------
includes       23.54   36.25     12.71    13.64
----------------------------------------------------------------------------
               26.53   29.53      3.00                                 41.00
----------------------------------------------------------------------------
               26.53    33.5      7.00              1.04
----------------------------------------------------------------------------
CC13-02         2.26    18.7     16.44     3.63     0.35     0.58       3.20
----------------------------------------------------------------------------
includes        2.26     6.9      4.34    11.17
----------------------------------------------------------------------------
(i) Lengths reported above are drill intersected core and do not represent
true widths.

As press released earlier, both electromagnetic and down-hole IP surveys of selected historic and the recent 3 drill holes were conducted in early January. The primary purpose of conducting hole-to-hole induced polarization geophysics program was to identify strike and plunge of the VMS mineralized lenses of the VenCan Zone. The results of the survey are being processed and will be used to direct continued drilling in this area.

Although the final interpretation and analysis is still in progress, the surveys would indicate that the mineralization is plunging to the west along strike. Based on how typical VMS systems behave, mineralization should increase the closer we move to the core of the system. The current geophysical and geochemical vectors indicate that this is west along strike. This hypothesis is further supported by the fact that Hole CC13-03 intersected 30 meters of 0.5% zinc stockwork material.

January 2014 Exploration Program Update

Drilling has re-commenced on the property. The Company anticipates drilling 10 to 15 holes, which should be completed by late February and expects to issue a news release on some of the drill-hole results in late February or early March as assays become available. A program of down-hole geophysical surveys will then be conducted on all the new drill holes in conjunction with geochemical and structural analysis to assist in drill targeting for the next phase of field exploration in April.

Summary of Drill-Hole Logs

CC13-01 was drilled into the massive sulfide mineralization exposed at surface at the Vencan showing to test its extension at depth. In situ geochemical analyses with a Niton light element XRF analyzer of the massive sulfide mineralization and its alteration envelope indicate a well behaved VMS-like hydrothermal system with an alteration envelop comprised of proximal chlorite and iron carbonate alteration and distal sericitization and silicification. Proximal chemical indicators of the mineralization include Cadmium (Cd), Iron (Fe), Manganese (Mn) and Tin (Sn) enrichments associated with the Zinc (Zn)-rich mineralization.

CC13-02 intersected a lateral extension of the massive sulfide mineralization nearer to surface and a Zn-mineralized stockwork mineralization at depth. Intense silicification characterizes the main alteration type of the stock work zone.

In CC13-03, the intersected mineralization has the attributes of the stockwork mineralization intersected in CC13-02 with Zn-rich stringers hosted in strongly silicified iron formation. This alteration zone still displays Mn and Sn enrichments similar to the massive sulfide mineralization and is interpreted to form the lateral extension of the stockwork zone in CC13-02.

----------------------------------------------------------------------------
                                   Elevation      Depth
Hole ID        Easting   Northing   (Metres)   (Metres)       Dip    Azimuth
----------------------------------------------------------------------------
CC13-01         407843    5298111        430        155     -84.5      334.8
----------------------------------------------------------------------------
CC13-02         407842    5298115        430        146       -55        290
----------------------------------------------------------------------------
CC13-03         407933    5298190        407         83       -65      165.8
----------------------------------------------------------------------------

Red Pine Receives Amended Permit from MNDM for Expanded Exploration Program

Red Pine is pleased to announce that it has received an amended exploration permit from the Ministry of Northern Development and Mines to further explore the Cayenne-Chili Property in the Swayze Belt, Ontario. The new permit is good for 3 years and covers diamond drilling, mechanized stripping, and trenching. The amendment covers the requirement for additional drill setups (greater than 20) for the continued exploration programs on the Cayenne-Chili Property.

On-site Quality Assurance/Quality Control Measures

All samples have been shipped to ACTLABS preparation laboratory in Thunder Bay Ontario. Analyses will be performed in the ACTLABS laboratory in Ancaster or Timmins, Ontario. All core samples were selected by the Red Pine site geologist, and were cut in half by diamond core saw. Individual samples were labelled, placed in plastic sample bags and sealed. Groups of samples were then placed into durable rice bags that were shipped out when ready. The remaining coarse reject portions of the samples remain in storage at the ACTLABS preparation laboratory storage facility in Thunder Bay as required in the event that further work or verification is needed.

Independent Quality Assurance and Quality Control Protocol

A QA/QC program has been implemented to monitor all assays from the current drilling program. Samples are assembled in batches and are continuously leaving the site for immediate testing. Included in each batch of samples are certified reference standards every 20 samples and blank samples comprised of sterile drill core inserted randomly (approximately every 20-30 samples).

About the Cayenne-Chili Property

--  The Cayenne - Chili Property hosts a remobilized VMS System Associated
    with an adjacent banded iron formation.
--  Multiple lenses of mineralization observed in the VenCan zinc showing
    indicate a stacked sequence of mineralized horizons
--  Remobilized Mineralization dips steeply to the North- not to the South
    as previously interpreted
--  Identified new showings with full utilization of Geophysical and
    Geochemical Data
--  Known High Grade Mineralization - assayed values of up to 24.7% Zn,
    15.6% Pb and 1.1% Cu from grab samples along the corridor (2013)
--  Close to existing infrastructure (rail line, power, all weather roads)

Qualified Person

Quentin Yarie, P.Geo, is the qualified person in regard to the technical data contained within this news release and will be responsible for overseeing all aspects of the Company's exploration programs.

About Red Pine Exploration Inc.

Red Pine Exploration is a gold and base metals exploration company headquartered in Toronto, Ontario, Canada. The Cayenne-Chili Property consists of 57 contiguous mining claims totalling 8704 hectares.

The Company's common shares trade on the TSX Venture Exchange under the symbol "RPX".

More detailed information about the Company is available on the website: www.redpineexp.com.

This News Release contains forward-looking statements. Forward-looking statements are statements which relate to future events. In some cases, you can identify forward-looking statements by terminology such as "may", "should", "expects", "plans", "anticipates", "believes", "estimates", "predicts", "potential" or "continue" or the negative of these terms or other comparable terminology. These statements are only predictions and involve known and unknown risks, uncertainties and other factors that may cause our or our industry's actual results, levels of activity, performance or achievements to be materially different from any future results, levels of activity, performance or achievements expressed or implied by these forward-looking statements.

Contacts:
Red Pine Exploration Inc.
Quentin Yarie
President & COO
(416) 364-7024
(416) 364-2753 (FAX)
[email protected]
www.redpineexp.com

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
The challenges of aggregating data from consumer-oriented devices, such as wearable technologies and smart thermostats, are fairly well-understood. However, there are a new set of challenges for IoT devices that generate megabytes or gigabytes of data per second. Certainly, the infrastructure will have to change, as those volumes of data will likely overwhelm the available bandwidth for aggregating the data into a central repository. Ochandarena discusses a whole new way to think about your next...
So the dumpster is on fire. Again. The site's down. Your boss's face is an ever-deepening purple. And you begin debating whether you should join the #incident channel or call an ambulance to deal with his impending stroke. Yes, we know this is a developer's fault. There's plenty of time for blame later. Postmortems have a macabre name because they were once intended to be Viking-like funerals for someone's job. But we're civilized now. Sort of. So we call them post-incident reviews. Fires are ne...
Whenever a new technology hits the high points of hype, everyone starts talking about it like it will solve all their business problems. Blockchain is one of those technologies. According to Gartner's latest report on the hype cycle of emerging technologies, blockchain has just passed the peak of their hype cycle curve. If you read the news articles about it, one would think it has taken over the technology world. No disruptive technology is without its challenges and potential impediments t...
Hackers took three days to identify and exploit a known vulnerability in Equifax’s web applications. I will share new data that reveals why three days (at most) is the new normal for DevSecOps teams to move new business /security requirements from design into production. This session aims to enlighten DevOps teams, security and development professionals by sharing results from the 4th annual State of the Software Supply Chain Report -- a blend of public and proprietary data with expert researc...
CloudEXPO New York 2018, colocated with DevOpsSUMMIT and DXWorldEXPO New York 2018 will be held November 12-13, 2018, in New York City and will bring together Cloud Computing, FinTech and Blockchain, Digital Transformation, Big Data, Internet of Things, DevOps, AI and Machine Learning to one location.
CloudEXPO | DevOpsSUMMIT | DXWorldEXPO are the world's most influential, independent events where Cloud Computing was coined and where technology buyers and vendors meet to experience and discuss the big picture of Digital Transformation and all of the strategies, tactics, and tools they need to realize their goals. Sponsors of DXWorldEXPO | CloudEXPO benefit from unmatched branding, profile building and lead generation opportunities.
DXWorldEXPO LLC announced today that Nutanix has been named "Platinum Sponsor" of CloudEXPO | DevOpsSUMMIT | DXWorldEXPO New York, which will take place November 12-13, 2018 in New York City. Nutanix makes infrastructure invisible, elevating IT to focus on the applications and services that power their business. The Nutanix Enterprise Cloud Platform blends web-scale engineering and consumer-grade design to natively converge server, storage, virtualization and networking into a resilient, softwar...
The digital transformation is real! To adapt, IT professionals need to transform their own skillset to become more multi-dimensional by gaining both depth and breadth of a wide variety of knowledge and competencies. Historically, while IT has been built on a foundation of specialty (or "I" shaped) silos, the DevOps principle of "shifting left" is opening up opportunities for developers, operational staff, security and others to grow their skills portfolio, advance their careers and become "T"-sh...
Lori MacVittie is a subject matter expert on emerging technology responsible for outbound evangelism across F5's entire product suite. MacVittie has extensive development and technical architecture experience in both high-tech and enterprise organizations, in addition to network and systems administration expertise. Prior to joining F5, MacVittie was an award-winning technology editor at Network Computing Magazine where she evaluated and tested application-focused technologies including app secu...
DXWorldEXPO LLC announced today that Big Data Federation to Exhibit at the 22nd International CloudEXPO, colocated with DevOpsSUMMIT and DXWorldEXPO, November 12-13, 2018 in New York City. Big Data Federation, Inc. develops and applies artificial intelligence to predict financial and economic events that matter. The company uncovers patterns and precise drivers of performance and outcomes with the aid of machine-learning algorithms, big data, and fundamental analysis. Their products are deployed...
ICC is a computer systems integrator and server manufacturing company focused on developing products and product appliances to meet a wide range of computational needs for many industries. Their solutions provide benefits across many environments, such as datacenter deployment, HPC, workstations, storage networks and standalone server installations. ICC has been in business for over 23 years and their phenomenal range of clients include multinational corporations, universities, and small busines...
This sixteen (16) hour course provides an introduction to DevOps, the cultural and professional movement that stresses communication, collaboration, integration and automation in order to improve the flow of work between software developers and IT operations professionals. Improved workflows will result in an improved ability to design, develop, deploy and operate software and services faster.
Headquartered in Plainsboro, NJ, Synametrics Technologies has provided IT professionals and computer systems developers since 1997. Based on the success of their initial product offerings (WinSQL and DeltaCopy), the company continues to create and hone innovative products that help its customers get more from their computer applications, databases and infrastructure. To date, over one million users around the world have chosen Synametrics solutions to help power their accelerated business or per...
All in Mobile is a place where we continually maximize their impact by fostering understanding, empathy, insights, creativity and joy. They believe that a truly useful and desirable mobile app doesn't need the brightest idea or the most advanced technology. A great product begins with understanding people. It's easy to think that customers will love your app, but can you justify it? They make sure your final app is something that users truly want and need. The only way to do this is by ...
Authorization of web applications developed in the cloud is a fundamental problem for security, yet companies often build solutions from scratch, which is error prone and impedes time to market. This talk shows developers how they can (instead) build on-top of community-owned projects and frameworks for better security.Whether you build software for enterprises, mobile, or internal microservices, security is important. Standards like SAML, OIDC, and SPIFFE help you solve identity and authenticat...