Welcome!

News Feed Item

LightPointe Introduces the World's Highest Powered, Lowest Latency 70/80 GHz E-Band Millimeter Wave Backhaul Radios

New AireBeam Plus and Aire X-Stream Plus Point-to-Point Solutions Provide an Industry-Leading 23 dBm of Power and Less Than 10 Nanoseconds Equipment/Terminal Latency

SAN DIEGO, CA and NEW YORK, NY -- (Marketwired) -- 01/28/14 -- LightPointe, a leading manufacturer of Gigabit capacity broadband wireless bridges used by enterprises, 4G/LTE network operators, and in Ultra Low Latency applications such as High Frequency Trading of stocks and Data Center connectivity, announced new product additions to its two families of 70/80 GHz millimeter wave wireless bridges. Both the AireBeam Series and the Aire X-Stream Series are now available in 20 and 23 dBm versions and several models provide super-fast terminal latency of less than 10 nanoseconds, making the new radios the highest powered, lowest latency 70/80 GHz radios from any manufacturer.

"Our new AireBeam Plus and Aire X-Stream Plus wireless bridges represent the culmination of several years of millimeter wave R&D and listening to our enterprise and carrier customers," said Dr. Heinz Willebrand, CEO of LightPointe. "These customers are in a relentless pursuit to add bandwidth to their networks and deliver data as fast as possible, with the absolute lowest latency. Distance is also always a factor and that is where the higher transmit power is important. The combination of lowest possible equipment latency, high capacity, and long distance operation are particularly important for special latency-sensitive applications such as High Frequency Trading, where LightPointe is widely regarded as the leading radio manufacturer. In addition, using dual polarization transmission allows for doubling the capacity over a single antenna and it helps to conserve real estate on antenna towers and rooftops. Plus, these radios are available with a selection of frequency bands within the 71 to 86 GHz E-band frequency spectrum, and feature non-interfering dual channel operation. All this adds up to providing our customers with the highest output power and lowest latency radios, the end result being faster than fiber broadband connections, ease of installation, and unbeatable ROI."

The Aire X-Stream radios, which recently began shipping to customers for point-to-point applications requiring extremely high data rates up to an aggregated full duplex layer 1 throughput of 2.5 Gbps over a single link. Using multiple noninterfering frequency channels and polarizations, the total aggregated layer 1 system capacity reaches 10 Gbps. For easy installation, the new systems come with a re-designed lightweight, high tensile strength aluminum enclosure, flexible copper and fiber based connectivity options, a field attachable alignment tool, and include an industry-leading 2 year warranty. The radios are produced in LightPointe's San Diego, California Design Center, which combines engineering with manufacturing personnel to speed product innovation, customer delivery, and enhance quality. LightPointe, an ISO 9001:2008 certified company, moved into the facility in late 2012.

LightPointe's Aire X-Stream radios operate in what is referred to as Layer 1, or the Physical Layer, which is the fundamental layer in networking that defines the means of transmitting raw bits of information. Radios optimized for Layer 1 are built for speed, and can be daisy-chained back to back for multi-mile distances even between cities. LightPointe's AireBeam radios are optimized for Layer 2, which provides flexible network management, diverse protocols, and Quality of Service capabilities. Both the AireBeam and Aire X-Stream E-band radios are available in 20 dBm and 23 dBm configurations, which is designated in the product names as the "Plus" configuration. The AireBeam and Aire X-Stream models are primarily deployed in the USA, Germany, Australia, Mexico, Canada, and the United Kingdom.

About LightPointe Communications, Inc.
LightPointe (www.LightPointe.com) is a San Diego-based manufacturer of wireless Gigabit capacity bridges for enterprise and 4G/LTE carrier markets, including small cell backhaul. The company also manufactures a line of Ultra Low Latency (ULL) wireless bridges utilized for High Frequency Trading (HFT) networks, Data Centers, Data Warehousing, and Cloud Networks. The company is owned by a billion-dollar Silicon Valley firm and employees.

Add to Digg Bookmark with del.icio.us Add to Newsvine

Todd Easterling
LightPointe
Email Contact

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
@ThingsExpo has been named the ‘Top WebRTC Influencer' by iTrend. iTrend processes millions of conversations, tweets, interactions, news articles, press releases, blog posts - and extract meaning form them and analyzes mobile and desktop software platforms used to communicate, various metadata (such as geo location), and automation tools. In overall placement, @ThingsExpo ranked as the number one ‘WebRTC Influencer' followed by @DevOpsSummit at 55th.
In 2014, Amazon announced a new form of compute called Lambda. We didn't know it at the time, but this represented a fundamental shift in what we expect from cloud computing. Now, all of the major cloud computing vendors want to take part in this disruptive technology. In his session at 20th Cloud Expo, John Jelinek IV, a web developer at Linux Academy, will discuss why major players like AWS, Microsoft Azure, IBM Bluemix, and Google Cloud Platform are all trying to sidestep VMs and containers...
SYS-CON Events announced today that Enzu will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY, and the 21st International Cloud Expo®, which will take place October 31-November 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Enzu’s mission is to be the leading provider of enterprise cloud solutions worldwide. Enzu enables online businesses to use its IT infrastructure to their competitive ad...
Providing the needed data for application development and testing is a huge headache for most organizations. The problems are often the same across companies - speed, quality, cost, and control. Provisioning data can take days or weeks, every time a refresh is required. Using dummy data leads to quality problems. Creating physical copies of large data sets and sending them to distributed teams of developers eats up expensive storage and bandwidth resources. And, all of these copies proliferating...
SYS-CON Events announced today that MobiDev, a client-oriented software development company, will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place June 6-8, 2017, at the Javits Center in New York City, NY, and the 21st International Cloud Expo®, which will take place October 31-November 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. MobiDev is a software company that develops and delivers turn-key mobile apps, websites, web services, and complex softw...
The speed of software changes in growing and large scale rapid-paced DevOps environments presents a challenge for continuous testing. Many organizations struggle to get this right. Practices that work for small scale continuous testing may not be sufficient as the requirements grow. In his session at DevOps Summit, Marc Hornbeek, Sr. Solutions Architect of DevOps continuous test solutions at Spirent Communications, explained the best practices of continuous testing at high scale, which is rele...
DevOps tends to focus on the relationship between Dev and Ops, putting an emphasis on the ops and application infrastructure. But that’s changing with microservices architectures. In her session at DevOps Summit, Lori MacVittie, Evangelist for F5 Networks, will focus on how microservices are changing the underlying architectures needed to scale, secure and deliver applications based on highly distributed (micro) services and why that means an expansion into “the network” for DevOps.
In his session at 19th Cloud Expo, Claude Remillard, Principal Program Manager in Developer Division at Microsoft, contrasted how his team used config as code and immutable patterns for continuous delivery of microservices and apps to the cloud. He showed how the immutable patterns helps developers do away with most of the complexity of config as code-enabling scenarios such as rollback, zero downtime upgrades with far greater simplicity. He also demoed building immutable pipelines in the cloud ...
Using new techniques of information modeling, indexing, and processing, new cloud-based systems can support cloud-based workloads previously not possible for high-throughput insurance, banking, and case-based applications. In his session at 18th Cloud Expo, John Newton, CTO, Founder and Chairman of Alfresco, described how to scale cloud-based content management repositories to store, manage, and retrieve billions of documents and related information with fast and linear scalability. He addres...
Hardware virtualization and cloud computing allowed us to increase resource utilization and increase our flexibility to respond to business demand. Docker Containers are the next quantum leap - Are they?! Databases always represented an additional set of challenges unique to running workloads requiring a maximum of I/O, network, CPU resources combined with data locality.
Due of the rise of Hadoop, many enterprises are now deploying their first small clusters of 10 to 20 servers. At this small scale, the complexity of operating the cluster looks and feels like general data center servers. It is not until the clusters scale, as they inevitably do, when the pain caused by the exponential complexity becomes apparent. We've seen this problem occur time and time again. In his session at Big Data Expo, Greg Bruno, Vice President of Engineering and co-founder of StackIQ...
The cloud market growth today is largely in public clouds. While there is a lot of spend in IT departments in virtualization, these aren’t yet translating into a true “cloud” experience within the enterprise. What is stopping the growth of the “private cloud” market? In his general session at 18th Cloud Expo, Nara Rajagopalan, CEO of Accelerite, explored the challenges in deploying, managing, and getting adoption for a private cloud within an enterprise. What are the key differences between wh...
Security, data privacy, reliability, and regulatory compliance are critical factors when evaluating whether to move business applications from in-house, client-hosted environments to a cloud platform. Quality assurance plays a vital role in ensuring that the appropriate level of risk assessment, verification, and validation takes place to ensure business continuity during the migration to a new cloud platform.
"Tintri was started in 2008 with the express purpose of building a storage appliance that is ideal for virtualized environments. We support a lot of different hypervisor platforms from VMware to OpenStack to Hyper-V," explained Dan Florea, Director of Product Management at Tintri, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Containers have changed the mind of IT in DevOps. They enable developers to work with dev, test, stage and production environments identically. Containers provide the right abstraction for microservices and many cloud platforms have integrated them into deployment pipelines. DevOps and containers together help companies achieve their business goals faster and more effectively. In his session at DevOps Summit, Ruslan Synytsky, CEO and Co-founder of Jelastic, reviewed the current landscape of Dev...