|By Marketwired .||
|January 29, 2014 01:56 PM EST|
MONTREAL, QUEBEC -- (Marketwired) -- 01/29/14 -- Freyja Resources Inc. ("Freyja" or the "Company") (TSX VENTURE:FRA) announced today that it has completed the first phase of its exploration program on its recently acquired Las Cristinas copper/silver project located in Northeastern Chihuahua State, Mexico (the "Project" or the "Property"). More specifically, the first phase of the exploration program focused on the Southern end of the Property (the "Las Cristinas Area") and on the following priorities:
-- Completion of the mapping and systematic sampling on surface and underground of the copper oxide ore on the Las Cristinas Area in order to better delineate the Company's one kilometer long initial exploration target. The sampling program consisted of over 300 samples ranging from 3 kg to 5 kg per sample. -- Completion of detailed topography of the Las Cristinas Area to support the mapping and sampling activities, the preparation of environmental permitting. -- Preparation of a 3,000 meter drilling campaign. The drilling campaign will begin immediately following receipt of the drilling permit, which is expected prior to the end of March 2014. The drilling campaign will target the oxide copper ore mineralized section of the Las Cristinas Area as well as to test the underground sulphide copper ore. -- Filing of an application to obtain a drilling permit.
The Company has already started to receive and compile some of the results from the sampling program. Results will be announced as soon as the geological interpretation of these results has been completed. The samples were delivered, in secure tagged bags, directly to the analytical facility for analysis, namely the laboratory of ALS Chemex de Mexico, located in Chihuahua City, Mexico. The samples were weighed, identified and photographed prior to sample preparation. All samples are analyzed by ME-ICP61 for 31 elements, Au-ICP21 for gold, Ag-OG62 when Ag is greater than 100g/t, Cu-OG62 when copper is greater than 1% and by Cu-AA07n to obtained the oxide portion of copper.
In addition, the Company continues to carry on metallurgic tests to determine the recovery rates of copper and silver as well as providing indication of costs. Lixiviation tests are also currently being conducted. Following the drilling campaign and subject to drilling results, the Company intends to build on site a heap leach pad planned for the summer of 2014 to test and fine tune the heap leach system. Investors should note that a feasibility study has not been completed and there is no certainty that the proposed operation will be economically viable.
About the Las Cristinas Project
The Las Cristinas Project includes four (4) adjacent exploration concessions, which cover an area of 683 hectares in northeast Mexico in the east center part of the Chihuahua State. The permits for the concessions are granted under the authority and administrated by the "Secretaria de Economia, Direccion General de Minas, Subdireccion de Mineria".
The Las Cristinas Project is located in the Basin and Range Belt of north Mexico, at 150 km northeast of the town of Chihuahua. The Project is in the center of the Chorreras mineralized region, an area that contains numerous concentrations of iron, gold, silver, copper and zinc in epithermal/mesothermal vein deposits and in a skarn deposits. The area is known by the presence of the copper hydrothermal veins in the Las Cristinas and El Caballo area. Within the Las Cristinas Project permit area, the copper system is seen spasmodically over 7 km. The mineralization is characterized by copper carbonate (azurite, malachite, crisocole) with patches of iron sulphide (pyrite) and copper sulphide (chalcopyrite, bornite) in centimetric veins within a calcite/barite/hematite veins environment, oriented 130 degrees and dipping 80 degrees southwest, intruding the Jurassic calcareous siltstone.
The city of Chihuahua has a population of approximately 1M people. It is the regional center for all goods and services, including private and international airport, a railroad terminus, communications, hotels, medical facilities, parts and supplies and skilled workers. The city is an important mining center and there are several mining offices. Within 30 kilometers of the project there are several small communities, these communities can provide workers and basic supplies and some lodging. The Las Cristinas Project is easily accessible from Chihuahua and takes roughly two hours by automobile. The project is remote from any habitations. Mine can be operated all year long, there plenty of space for a mining operation and there is water and electricity in the vicinity. There is a train station in Estacion Falomir 30km north of the Project
About Freyja Resources Inc.
Freyja Resources Inc. is a mining exploration company listed on the TSX Venture Exchange under the symbol "FRA". Freyja Resources' main operations are conducted through its wholly owned subsidiary Cyprium Mining Corporation ("Cyprium"). Cyprium is a mineral exploration company which targets the acquisition and generation of mining projects located solely in Northern Mexico that have a potential for profitable precious and base metal open pit production. Cyprium is committed to maximizing shareholder value by strategically ensuring efficient and profitable production and focusing on a hybrid exploration/production business model. Cyprium prioritizes projects accessible by well-maintained roads and/or railroad systems. Upon completion of a conclusive exploration campaign, Cyprium's focus is to rapidly establish an economical production and maximize the project potential by funding further exploration through cash generated by production, thus limiting shareholder dilution. The Company's main project is the Las Cristinas copper/silver project located in Chihuahua State, Mexico.
Cyprium owns 51% of Coyame Copper SA de CV ("Coyame Copper"), a Chihuahua, Mexico based mining exploration company and has an option to increase its stake in Coyame Copper to 70% for a consideration of US $1.2 million payable over a period of eighteen months following the exercise of the option. Coyame Copper's Las Cristinas Project consist of four adjacent exploration concessions (Las Cristinas, La Parita, La Verde and La Lagrimosa) covering 684 hectares. Coyame Copper also owns production assets located outside the town of Coyame, Mexico.
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
The geological information of this release have been verified by Jacques Marchand, P.Eng. P.Geo, and an independent Qualified Person.
This news release contains "forward-looking information" (within the meaning of applicable Canadian securities laws) and "forward -looking statements" (within the meaning of the U.S. Private Securities Litigation Reform Act of 1995). Such statements or information are identified with words such as "anticipate", "believe", "expect", "plan", "intend", "potential", "estimate", "propose", "project", "outlook", "foresee" or similar words suggesting future outcomes or statements regarding an outlook. Such statements include, among others, those concerning the Company's anticipated plans for developments of the Company and its mining projects.
Such forward-looking information or statements are based on a number of risks, uncertainties and assumptions which may cause actual results or other expectations to differ materially from those anticipated and which may prove to be incorrect. Assumptions have been made regarding, among other things, management's expectations regarding future growth, plans for and completion of projects by Company's third party relationships, availability of capital, and the necessity to incur capital and other expenditures. Actual results could differ materially due to a number of factors, including, without limitation, operational risks in the completion of Company's anticipated projects, delays or changes in plans with respect to the development of Company's anticipated projects by Company's third party relationships, risks affecting the ability to develop projects, risks inherent in operating in foreign jurisdictions, the ability to attract key personnel, and the inability to raise additional capital. No assurances can be given that the efforts by the Company will be successful. Additional assumptions and risks are set out in detail in the Company's MD&A, available on SEDAR at www.sedar.com.
Although the Company believes that the expectations reflected in the forward-looking information or statements are reasonable, prospective investors in the Company's securities should not place undue reliance on forward-looking statements because the Company can provide no assurance that such expectations will prove to be correct. Forward-looking information and statements contained in this news release are as of the date of this news release and the Company assumes no obligation to update or revise this forward-looking information and statements except as required by law.
Freyja Resources Inc.
Much of the value of DevOps comes from a (renewed) focus on measurement, sharing, and continuous feedback loops. In increasingly complex DevOps workflows and environments, and especially in larger, regulated, or more crystallized organizations, these core concepts become even more critical. In his session at @DevOpsSummit at 18th Cloud Expo, Andi Mann, Chief Technology Advocate at Splunk, will show how, by focusing on 'metrics that matter,' you can provide objective, transparent, and meaningfu...
May. 6, 2016 07:00 AM EDT Reads: 1,217
The IoTs will challenge the status quo of how IT and development organizations operate. Or will it? Certainly the fog layer of IoT requires special insights about data ontology, security and transactional integrity. But the developmental challenges are the same: People, Process and Platform. In his session at @ThingsExpo, Craig Sproule, CEO of Metavine, will demonstrate how to move beyond today's coding paradigm and share the must-have mindsets for removing complexity from the development proc...
May. 6, 2016 07:00 AM EDT Reads: 1,065
Artificial Intelligence has the potential to massively disrupt IoT. In his session at 18th Cloud Expo, AJ Abdallat, CEO of Beyond AI, will discuss what the five main drivers are in Artificial Intelligence that could shape the future of the Internet of Things. AJ Abdallat is CEO of Beyond AI. He has over 20 years of management experience in the fields of artificial intelligence, sensors, instruments, devices and software for telecommunications, life sciences, environmental monitoring, process...
May. 6, 2016 06:00 AM EDT Reads: 1,517
In his session at @ThingsExpo, Chris Klein, CEO and Co-founder of Rachio, will discuss next generation communities that are using IoT to create more sustainable, intelligent communities. One example is Sterling Ranch, a 10,000 home development that – with the help of Siemens – will integrate IoT technology into the community to provide residents with energy and water savings as well as intelligent security. Everything from stop lights to sprinkler systems to building infrastructures will run ef...
May. 6, 2016 04:00 AM EDT Reads: 1,338
Redis is not only the fastest database, but it has become the most popular among the new wave of applications running in containers. Redis speeds up just about every data interaction between your users or operational systems. In his session at 18th Cloud Expo, Dave Nielsen, Developer Relations at Redis Labs, will shares the functions and data structures used to solve everyday use cases that are driving Redis' popularity.
May. 6, 2016 02:45 AM EDT Reads: 1,300
We’ve worked with dozens of early adopters across numerous industries and will debunk common misperceptions, which starts with understanding that many of the connected products we’ll use over the next 5 years are already products, they’re just not yet connected. With an IoT product, time-in-market provides much more essential feedback than ever before. Innovation comes from what you do with the data that the connected product provides in order to enhance the customer experience and optimize busi...
May. 6, 2016 02:00 AM EDT Reads: 1,419
Manufacturers are embracing the Industrial Internet the same way consumers are leveraging Fitbits – to improve overall health and wellness. Both can provide consistent measurement, visibility, and suggest performance improvements customized to help reach goals. Fitbit users can view real-time data and make adjustments to increase their activity. In his session at @ThingsExpo, Mark Bernardo Professional Services Leader, Americas, at GE Digital, will discuss how leveraging the Industrial Interne...
May. 6, 2016 01:45 AM EDT Reads: 1,435
In his session at 18th Cloud Expo, Sagi Brody, Chief Technology Officer at Webair Internet Development Inc., will focus on real world deployments of DDoS mitigation strategies in every layer of the network. He will give an overview of methods to prevent these attacks and best practices on how to provide protection in complex cloud platforms. He will also outline what we have found in our experience managing and running thousands of Linux and Unix managed service platforms and what specifically c...
May. 6, 2016 01:30 AM EDT Reads: 1,401
The increasing popularity of the Internet of Things necessitates that our physical and cognitive relationship with wearable technology will change rapidly in the near future. This advent means logging has become a thing of the past. Before, it was on us to track our own data, but now that data is automatically available. What does this mean for mHealth and the "connected" body? In her session at @ThingsExpo, Lisa Calkins, CEO and co-founder of Amadeus Consulting, will discuss the impact of wea...
May. 6, 2016 01:00 AM EDT Reads: 1,264
Increasing IoT connectivity is forcing enterprises to find elegant solutions to organize and visualize all incoming data from these connected devices with re-configurable dashboard widgets to effectively allow rapid decision-making for everything from immediate actions in tactical situations to strategic analysis and reporting. In his session at 18th Cloud Expo, Shikhir Singh, Senior Developer Relations Manager at Sencha, will discuss how to create HTML5 dashboards that interact with IoT devic...
May. 6, 2016 12:00 AM EDT Reads: 1,490
Whether your IoT service is connecting cars, homes, appliances, wearable, cameras or other devices, one question hangs in the balance – how do you actually make money from this service? The ability to turn your IoT service into profit requires the ability to create a monetization strategy that is flexible, scalable and working for you in real-time. It must be a transparent, smoothly implemented strategy that all stakeholders – from customers to the board – will be able to understand and comprehe...
May. 5, 2016 11:30 PM EDT Reads: 1,364
SYS-CON Events announced today that SoftLayer, an IBM Company, has been named “Gold Sponsor” of SYS-CON's 18th Cloud Expo, which will take place on June 7-9, 2016, at the Javits Center in New York, New York. SoftLayer, an IBM Company, provides cloud infrastructure as a service from a growing number of data centers and network points of presence around the world. SoftLayer’s customers range from Web startups to global enterprises.
May. 5, 2016 05:00 PM EDT Reads: 1,288
Many private cloud projects were built to deliver self-service access to development and test resources. While those clouds delivered faster access to resources, they lacked visibility, control and security needed for production deployments. In their session at 18th Cloud Expo, Steve Anderson, Product Manager at BMC Software, and Rick Lefort, Principal Technical Marketing Consultant at BMC Software, will discuss how a cloud designed for production operations not only helps accelerate developer...
May. 5, 2016 05:00 PM EDT Reads: 1,387
A critical component of any IoT project is the back-end systems that capture data from remote IoT devices and structure it in a way to answer useful questions. Traditional data warehouse and analytical systems are mature technologies that can be used to handle large data sets, but they are not well suited to many IoT-scale products and the need for real-time insights. At Fuze, we have developed a backend platform as part of our mobility-oriented cloud service that uses Big Data-based approache...
May. 5, 2016 04:00 PM EDT Reads: 798
Peak 10, Inc., has announced the implementation of IT service management, a business process alignment initiative based on the widely adopted Information Technology Infrastructure Library (ITIL) framework. The implementation of IT service management enhances Peak 10’s current service-minded approach to IT delivery by propelling the company to deliver higher levels of personalized and prompt service. The majority of Peak 10’s operations employees have been trained and certified in the ITIL frame...
May. 5, 2016 04:00 PM EDT Reads: 1,210