Welcome!

News Feed Item

Probe Mines Announces High-Grade Infill Drill Intercepts, Including 7.0 g/t Gold Over 39.5 Metres, for its Borden Gold Project, Ontario

TORONTO, ONTARIO -- (Marketwired) -- 02/18/14 -- Probe Mines Limited (TSX VENTURE:PRB)

Highlights:


--  Infill drilling within High-Grade Zone ("HGZ") returned significant gold
    mineralization in Hole BL14-583on Section 1000mSE. This drill hole is
    located near the northwest end of the HGZ and demonstrates higher grades
    than previously encountered, returning: 
    --  39.5 metres averaging 7.0 g/t gold 
        --  including 28.5 metres grading 9.1 g/t gold 
        --  including 16.0 metres grading 12.4 g/t gold

--  Infill Hole BL14-584 on Section 1050mSE (50m southeast of BL14-583)
    returned a significant intersection of: 
    --  34.8 metres averaging 5.1 g/t gold 
        --  including 12.6 metres of 11.4 g/t gold

--  Infill Hole BL14-582 on Section 950mSE (50m northwest of BL14-583)
    returned a thick gold intercept, consisting of: 
    --  30.1 metres averaging 3.5 g/t gold 
        --  including 2.9 metres grading 14.1 g/t gold 
        --  also including 7.2 metres grading 4.4 g/t gold

--  Results continue to confirm the importance of the infill drill program
    through the identification of higher grades within the deposit, and
    particularly in the HGZ

Probe Mines Limited (TSX VENTURE:PRB) ("Probe" or the "Company") is pleased to announce that it has received further results for its on-going drill program on the Company's Borden Gold project near Chapleau, Ontario. Results are for the last nine (9) holes completed from the land-based infill drilling program on the High-Grade Zone ("HGZ") before the start of the on-ice drilling, which is currently underway. Diamond drill holes BL14-578 to BL14-586 were received and were successful in demonstrating the continuity and consistency of the high-grade gold mineralization. Holes BL14-583, -584, -582 and -586 are of particular importance as they demonstrate increasing grades at shallow depths (220-250 metres) within the northwest end of the HGZ (Sections 950mSE to 1100mSE) and indicate that the HGZ is still improving within its known strike length. Significantly, all four drill holes are located northwest of the original HGZ discovery hole, BL12-256, on Section 1200mSE (see News Release dated December 12, 2012).

Diamond drill hole BL14-583 returned a thick intersection of high-grade gold on Section 1000mSE consisting of 39.5 metres averaging 7.0 g/t gold ("Au"), which includes a higher-grade interval of 16 metres averaging 12.4 g/t Au. Fifty metres to the southeast (Section 1050mSE), Hole BL14-584 returned an equally significant 34.8 metres grading 5.1 g/t Au, including 12.6 metres of 11.4 g/t Au, while fifty metres to the northwest (Section 950mSE), Hole BL14-582 displayed an notable section of 30.1 metres averaging 3.5 g/t Au, which includes a 7.2 metre interval of 4.4 g/t Au. These results confirm the importance of the infill program and its contribution to the overall increase in the gold grades observed within the deposit.

The following table shows selected drill results for the HGZ infill drilling, which includes the shallow and deep holes necessary to bracket the gold mineralized structure in order to more accurately define its boundaries. No top-cut was used in calculating the gold intervals. Depths of the mineralized zones in Holes BL14-582, -583, -584 and -586, on sections 950mSE to 1100mSE are between 220 and 250 metres vertical depth. Mineralized intervals from holes to the southeast, on sections 1850mSE to 1950mSE, are between 420 and 570 metres vertical depth. All intervals approximate true width. Updated plan and section maps for all holes are also available on the Company's website at www.probemines.com:

High-Grade Zone Drill Results


----------------------------------------------------------------------------
                              From            To         Width            Au
DDH       Section              (m)           (m)           (m)         (g/t)
----------------------------------------------------------------------------
BL14-578  1900mSE            426.3         429.0           2.7           6.9
----------------------------------------------------------------------------
          1900mSE            534.0         549.0          15.0           1.8
----------------------------------------------------------------------------
          including          540.0         549.0           9.0           2.4
----------------------------------------------------------------------------
BL14-579  1850mSE            554.0         565.8          11.8           1.0
----------------------------------------------------------------------------
BL14-580  1950mSE            586.7         612.0          25.3           1.4
----------------------------------------------------------------------------
          including          597.4         606.0           8.6           2.3
----------------------------------------------------------------------------
BL14-581  1900mSE            459.1         464.4           5.3           1.3
----------------------------------------------------------------------------
          1900mSE            557.9         563.9           6.0           1.7
----------------------------------------------------------------------------
BL14-582  950mSE             237.9         268.0          30.1           3.5
----------------------------------------------------------------------------
          including          237.9         240.8           2.9          14.1
----------------------------------------------------------------------------
          also including     253.3         260.5           7.2           4.4
----------------------------------------------------------------------------
BL14-583  1000mSE            232.0         271.5          39.5           7.0
----------------------------------------------------------------------------
          including          243.0         271.5          28.5           9.1
----------------------------------------------------------------------------
          including          243.0         259.0          16.0          12.4
----------------------------------------------------------------------------
BL14-584  1050SE             237.0         271.8          34.8           5.1
----------------------------------------------------------------------------
          including          247.0         259.6          12.6          11.4
----------------------------------------------------------------------------
BL14-585  Lost Hole            ---           ---           ---           ---
----------------------------------------------------------------------------
BL14-586  1100SE             223.0         260.0          37.0           2.5
----------------------------------------------------------------------------
          including          244.1         260.0          15.9           4.6
----------------------------------------------------------------------------
          including          244.1         248.0           3.9           8.7
----------------------------------------------------------------------------

Dr. David Palmer, President and CEO of Probe, comments, "It is encouraging to see continued improvement within the high grade zone, and more importantly at its northwest end where mineralization tends to be shallowest. The increasing grade observed in the northwest between Sections 950mSE and 1100mSE suggests that there are still improvements to be made within the current strike length of the high-grade zone, in addition to the strong potential for expansion now being tested out on the ice. These results re-affirm the value of the infill program, which will continue to be one area of focus for the 2014 exploration program."

Probe has instituted a strict quality assurance and quality control ("QA-QC") program for the Borden Gold drill core sampling, with each fire assay furnace batch of 40 samples including two certified reference materials (standards), one blank sample and one core duplicate sample. Quality control guidelines and ongoing QAQC monitoring are being carried out by Probe personnel.

About Probe Mines:

Probe Mines Limited is a Canadian precious metals exploration company whose key asset is the Borden Gold Zone in Ontario, Canada. As of October 31, 2013, the Company is well-positioned with approximately $33.4 million in treasury. The Company is actively exploring a significant new gold resource on its Borden Gold Zone near Chapleau, Ontario and has 100% interest in the Black Creek chromite deposit located in Northern Ontario. The Company's shares trade on the TSX Venture Exchange under the symbol PRB.

David Palmer, Ph.D., P.Geo., is the qualified person for all technical information in this release. To find out more about Probe Mines Limited, visit our website at www.probemines.com.

On behalf of Probe Mines Limited,

Dr. David Palmer, President & Chief Executive Officer

Forward-Looking Statements

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. This News Release includes certain "forward-looking statements". These statements are based on information currently available to the Company and the Company provides no assurance that actual results will meet management's expectations. Forward-looking statements include estimates and statements that describe the Company's future plans, objectives or goals, including words to the effect that the Company or management expects a stated condition or result to occur. Forward-looking statements may be identified by such terms as "believes", "anticipates", "expects", "estimates", "may", "could", "would", "will", or "plan". Since forward-looking statements are based on assumptions and address future events and conditions, by their very nature they involve inherent risks and uncertainties. Actual results relating to, among other things, results of exploration, project development, reclamation and capital costs of the Company's mineral properties, and the Company's financial condition and prospects, could differ materially from those currently anticipated in such statements for many reasons such as: changes in general economic conditions and conditions in the financial markets; changes in demand and prices for minerals; litigation, legislative, environmental and other judicial, regulatory, political and competitive developments; technological and operational difficulties encountered in connection with the activities of the Company; and other matters discussed in this news release. This list is not exhaustive of the factors that may affect any of the Company's forward-looking statements. These and other factors should be considered carefully and readers should not place undue reliance on the Company's forward-looking statements. The Company does not undertake to update any forward-looking statement that may be made from time to time by the Company or on its behalf, except in accordance with applicable securities laws.

Shares Issued: 75,684,727

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
It is one thing to build single industrial IoT applications, but what will it take to build the Smart Cities and truly society changing applications of the future? The technology won’t be the problem, it will be the number of parties that need to work together and be aligned in their motivation to succeed. In his Day 2 Keynote at @ThingsExpo, Henrik Kenani Dahlgren, Portfolio Marketing Manager at Ericsson, discussed how to plan to cooperate, partner, and form lasting all-star teams to change the...
For organizations that have amassed large sums of software complexity, taking a microservices approach is the first step toward DevOps and continuous improvement / development. Integrating system-level analysis with microservices makes it easier to change and add functionality to applications at any time without the increase of risk. Before you start big transformation projects or a cloud migration, make sure these changes won’t take down your entire organization.
SYS-CON Events announced today that delaPlex will exhibit at SYS-CON's @CloudExpo, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. delaPlex pioneered Software Development as a Service (SDaaS), which provides scalable resources to build, test, and deploy software. It’s a fast and more reliable way to develop a new product or expand your in-house team.
Extreme Computing is the ability to leverage highly performant infrastructure and software to accelerate Big Data, machine learning, HPC, and Enterprise applications. High IOPS Storage, low-latency networks, in-memory databases, GPUs and other parallel accelerators are being used to achieve faster results and help businesses make better decisions. In his session at 18th Cloud Expo, Michael O'Neill, Strategic Business Development at NVIDIA, focused on some of the unique ways extreme computing is...
SYS-CON Events announced today that IoT Now has been named “Media Sponsor” of SYS-CON's 20th International Cloud Expo, which will take place on June 6–8, 2017, at the Javits Center in New York City, NY. IoT Now explores the evolving opportunities and challenges facing CSPs, and it passes on some lessons learned from those who have taken the first steps in next-gen IoT services.
Updating DevOps to the latest production data slows down your development cycle. Probably it is due to slow, inefficient conventional storage and associated copy data management practices. In his session at @DevOpsSummit at 20th Cloud Expo, Dhiraj Sehgal, in Product and Solution at Tintri, will talk about DevOps and cloud-focused storage to update hundreds of child VMs (different flavors) with updates from a master VM in minutes, saving hours or even days in each development cycle. He will also...
The explosion of new web/cloud/IoT-based applications and the data they generate are transforming our world right before our eyes. In this rush to adopt these new technologies, organizations are often ignoring fundamental questions concerning who owns the data and failing to ask for permission to conduct invasive surveillance of their customers. Organizations that are not transparent about how their systems gather data telemetry without offering shared data ownership risk product rejection, regu...
SYS-CON Events announced today that WineSOFT will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Based in Seoul and Irvine, WineSOFT is an innovative software house focusing on internet infrastructure solutions. The venture started as a bootstrap start-up in 2010 by focusing on making the internet faster and more powerful. WineSOFT’s knowledge is based on the expertise of TCP/IP, VPN, SSL, peer-to-peer, mob...
The Internet of Things can drive efficiency for airlines and airports. In their session at @ThingsExpo, Shyam Varan Nath, Principal Architect with GE, and Sudip Majumder, senior director of development at Oracle, discussed the technical details of the connected airline baggage and related social media solutions. These IoT applications will enhance travelers' journey experience and drive efficiency for the airlines and the airports.
With billions of sensors deployed worldwide, the amount of machine-generated data will soon exceed what our networks can handle. But consumers and businesses will expect seamless experiences and real-time responsiveness. What does this mean for IoT devices and the infrastructure that supports them? More of the data will need to be handled at - or closer to - the devices themselves.
SYS-CON Events announced today that Dataloop.IO, an innovator in cloud IT-monitoring whose products help organizations save time and money, has been named “Bronze Sponsor” of SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Dataloop.IO is an emerging software company on the cutting edge of major IT-infrastructure trends including cloud computing and microservices. The company, founded in the UK but now based in San Fran...
Big Data, cloud, analytics, contextual information, wearable tech, sensors, mobility, and WebRTC: together, these advances have created a perfect storm of technologies that are disrupting and transforming classic communications models and ecosystems. In his session at @ThingsExpo, Erik Perotti, Senior Manager of New Ventures on Plantronics’ Innovation team, provided an overview of this technological shift, including associated business and consumer communications impacts, and opportunities it m...
The financial services market is one of the most data-driven industries in the world, yet it’s bogged down by legacy CPU technologies that simply can’t keep up with the task of querying and visualizing billions of records. In his session at 20th Cloud Expo, Jared Parker, Director of Financial Services at Kinetica, will discuss how the advent of advanced in-database analytics on the GPU makes it possible to run sophisticated data science workloads on the same database that is housing the rich inf...
In his keynote at @ThingsExpo, Chris Matthieu, Director of IoT Engineering at Citrix and co-founder and CTO of Octoblu, focused on building an IoT platform and company. He provided a behind-the-scenes look at Octoblu’s platform, business, and pivots along the way (including the Citrix acquisition of Octoblu).
"delaPlex is a software development company. We do team-based outsourcing development," explained Mark Rivers, COO and Co-founder of delaPlex Software, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.