Welcome!

News Feed Item

Canada Strategic Metals Confirms the Extension of Zone 25 at Depth and to the Northwest at the Sakami Gold Project, with 2.77 g/t Gold Over 20.50 Metres, Including 3.23 g/t Au Over 13.35 Metres

MONTREAL, QUEBEC -- (Marketwired) -- 02/19/14 -- Canada Strategic Metals Inc. ("Canada Strategic Metals" or "the Company") (TSX VENTURE: CJC)(FRANKFURT: YXEN)(OTCBB: CJCFF) and Matamec Explorations Inc. (TSX VENTURE: MAT)(OTCQX: MHREF) are pleased to announce results from another drillhole from the recent drilling campaign on the Sakami gold project. These new results confirm the extension to the northwest and at depth of the Zone 25 envelope of gold mineralization. Hole PT-13-68 has also resulted in the discovery of a new gold zone at depth on the Sakami project. The program consisted of nine holes for a total of 1,605 metres of drilling.

The main objective of the campaign was to validate and extend the historical zone identified by Matamec Explorations between 2000 and 2004, with a secondary objective of acquiring a better understanding of the spatial geometry of the two known main zones in the "La Pointe" area of the Sakami property. A table with all the drillhole locations is shown below. A surface map showing drillhole locations and sections can be found on the Company's website at: www.csmetals.ca.

The Company recently received gold assay results for another hole, PT-13-68, drilled to test the extension of Zone 25 at depth and to the northwest. Up until now, Zone 25 appeared to narrow and pinch out on this section. However, Hole PT-13-68 returned three gold intersections grading 2.77 g/t Au over 20.50 metres (including 3.23 g/t over 13.35 metres and 4.71 g/t Au over 3.35 metres), 2.85 g/t Au over 2.85 metres and 1.70 g/t over 3.00 metres. The last intersection, located between 294.00 metres and 297.00 metres downhole, represents a new discovery. The three last metres of core were not sent for analysis, but will be sampled and sent for assaying as soon as possible. If the results are positive, the Company return to Hole PT-13-68 and continue drilling to ensure that it has intersected this new gold-bearing zone over its entire width. All mineralized intersections and gold assay results from the recent program received to date are shown below.

"We are very pleased to once again report positive results from recent drilling on the Sakami project during the latest exploration program," said Jean-Sebastien Lavallee, President and Chief Executive Officer of Canada Strategic Metals. "We are looking forward to receiving the results for the four other holes drilled during the program."

The Company will release the results for the remaining holes as soon as they have been received and compiled.

Table of mineralized intersections from the recent drilling campaign


----------------------------------------------------------------------------
----------------------------------------------------------------------------
                              From            To    Length(i)          Gold
Hole #    Type                 (m)           (m)           (m)           g/t
----------------------------------------------------------------------------
----------------------------------------------------------------------------
PT-13-64  New zone           68.85         69.90          1.05          1.27
----------------------------------------------------------------------------
PT-13-64  New zone          171.00        171.50          0.50          3.62
----------------------------------------------------------------------------
PT-13-65  Zone 25           112.50        138.00         25.50          3.03
Including                   126.00        138.00         12.00          4.00
----------------------------------------------------------------------------
PT-13-66  Zone 25           109.95         125.4         15.45          1.18
----------------------------------------------------------------------------
PT-13-67  Zone 25           126,90        154,85         27,95          3.78
Including                   132.25        154.85         22.60          4.01
Including                   138.00        145.00          7.00          7.21
----------------------------------------------------------------------------
PT-13-68  Zone 25           200.50        221.00         20.50          2.77
Including                   201.65        215.00         13.35          3.23
Including                   201.65        205.00          3.35          4.71
          New zone          278.25        281.10          2.85          2.82
          New zone          294.00        297.00          3.00           1.7
----------------------------------------------------------------------------
PT-13-69  Zone 26           141.45           150      8.55(ii)       Pending
----------------------------------------------------------------------------
PT-13-69  Zone 25           192.85         199.6      6.75(ii)       Pending
----------------------------------------------------------------------------
PT-13-70  Zone 25             65.4          85.5      20.1(ii)       Pending
----------------------------------------------------------------------------
PT-13-71  Zone 26             48.9            61      12.1(ii)       Pending
----------------------------------------------------------------------------
PT-13-71  Zone 25              102         118.5      16.5(ii)       Pending
----------------------------------------------------------------------------
PT-13-72  Zone 26             49.2          66.2        17(ii)       Pending
----------------------------------------------------------------------------
PT-13-72  Zone 25            107.9           130      22.1(ii)       Pending
----------------------------------------------------------------------------
----------------------------------------------------------------------------
(i)   Core length; the Company estimates the true width of the mineralized
      zone at 80 to 95% of the core length
(ii)  Mineralized zone

The 2013 drilling program was managed by Consul-Teck Exploration of Val-d'Or, Quebec, who designed the drilling campaign, supervised the program and logged and sampled the core.

Consul-Teck Exploration implemented QA/QC procedures to ensure best practices in sampling and analysis of the core samples. The drill core was logged and then split, with one-half sent for assay and the other retained in the core box as a witness sample. Duplicates, standards and blanks were inserted regularly into the sample stream.

The samples in secure tagged bags were delivered directly to the analytical facility for analysis. In this case, the analytical facility was the Bourlamaque Ltee laboratory in Val-d'Or, Quebec. The samples are weighed and identified prior to sample preparation. All samples are analyzed by fire assay with AA finish on a 30g sample (0.01-10 ppm Au), with a gravimetric finish for assays over 10 ppm Au.

Jean-Sebastien Lavallee (OGQ #773), geologist, shareholder and President and Chief Executive Officer of the Company and a Qualified Person under NI 43-101, has reviewed and approved the technical content of this release.

Canada Strategic Metals is pleased to announce that it has retained FronTier Merchant Capital Group ("FronTier") for Investor Relations Services. FronTier is an experienced and reputable Investor Relations group with a home office in Toronto, Canada. FronTier will assist the company by increasing market awareness for Canada Strategic Metals utilizing a number of financial market communications initiatives. The core of which will be facilitating in-person introductions for Canada Strategic metals with institutional and retail brokers and investors in a number of cities across Canada, the US, Europe and Australasia. FronTier has been retained for a six months period at $5,000 per month plus direct expenses.

About Matamec Explorations

Matamec Explorations Inc. is a mining exploration company whose focus is developing the Kipawa HREE deposit with TRECan, with the goal of supplying Toyota with HREEs for the production of hybrid and electric cars. The company is exploring 35 km of strike length in the Kipawa Alkalic complex for rare earths-yttrium-zirconium-niobium-tantalum mineralization on its Zeus property. Matamec is also exploring for gold at its Matheson joint-venture property, which is located along strike and in close proximity to the Hoyle Pond mine in Timmins, Ontario. In Quebec, the company is exploring for lithium and tantalum on its Tansim property and for precious and base metals on its Sakami, Valmont and Vulcain properties. For more information, please visit www.matamec.com.

About Canada Strategic Metals

Canada Strategic Metals is an emerging company focused on the exploration and development of a number of projects covering over 20,000 hectares in Quebec. With broad management experience in green technology and junior resource exploration and development, Canada Strategic Metals is well positioned to aggressively advance this promising property portfolio for its shareholders.

For more information on the Company, please visit www.csmetals.ca

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
SYS-CON Events announced today that DivvyCloud will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. DivvyCloud software enables organizations to achieve their cloud computing goals by simplifying and automating security, compliance and cost optimization of public and private cloud infrastructure. Using DivvyCloud, customers can leverage programmatic Bots to identify and remediate common cloud problems in rea...
Most DevOps journeys involve several phases of maturity. Research shows that the inflection point where organizations begin to see maximum value is when they implement tight integration deploying their code to their infrastructure. Success at this level is the last barrier to at-will deployment. Storage, for instance, is more capable than where we read and write data. In his session at @DevOpsSummit at 20th Cloud Expo, Josh Atwell, a Developer Advocate for NetApp, will discuss the role and value...
In his opening keynote at 20th Cloud Expo, Michael Maximilien, Research Scientist, Architect, and Engineer at IBM, will motivate why realizing the full potential of the cloud and social data requires artificial intelligence. By mixing Cloud Foundry and the rich set of Watson services, IBM's Bluemix is the best cloud operating system for enterprises today, providing rapid development and deployment of applications that can take advantage of the rich catalog of Watson services to help drive insigh...
SYS-CON Events announced today that Tintri, Inc, a leading provider of enterprise cloud infrastructure, will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Tintri offers an enterprise cloud platform built with public cloud-like web services and RESTful APIs. Organizations use Tintri all-flash storage with scale-out and automation as a foundation for their own clouds – to build agile development environments...
Cloud promises the agility required by today’s digital businesses. As organizations adopt cloud based infrastructures and services, their IT resources become increasingly dynamic and hybrid in nature. Managing these require modern IT operations and tools. In his session at 20th Cloud Expo, Raj Sundaram, Senior Principal Product Manager at CA Technologies, will discuss how to modernize your IT operations in order to proactively manage your hybrid cloud and IT environments. He will be sharing bes...
A strange thing is happening along the way to the Internet of Things, namely far too many devices to work with and manage. It has become clear that we'll need much higher efficiency user experiences that can allow us to more easily and scalably work with the thousands of devices that will soon be in each of our lives. Enter the conversational interface revolution, combining bots we can literally talk with, gesture to, and even direct with our thoughts, with embedded artificial intelligence, whic...
Every successful software product evolves from an idea to an enterprise system. Notably, the same way is passed by the product owner's company. In his session at 20th Cloud Expo, Oleg Lola, CEO of MobiDev, will provide a generalized overview of the evolution of a software product, the product owner, the needs that arise at various stages of this process, and the value brought by a software development partner to the product owner as a response to these needs.
SYS-CON Events announced today that Cloudistics, an on-premises cloud computing company, has been named “Bronze Sponsor” of SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Cloudistics delivers a complete public cloud experience with composable on-premises infrastructures to medium and large enterprises. Its software-defined technology natively converges network, storage, compute, virtualization, and management into a ...
SYS-CON Events announced today that delaPlex will exhibit at SYS-CON's @ThingsExpo, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. delaPlex pioneered Software Development as a Service (SDaaS), which provides scalable resources to build, test, and deploy software. It’s a fast and more reliable way to develop a new product or expand your in-house team.
SYS-CON Events announced today that Technologic Systems Inc., an embedded systems solutions company, will exhibit at SYS-CON's @ThingsExpo, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Technologic Systems is an embedded systems company with headquarters in Fountain Hills, Arizona. They have been in business for 32 years, helping more than 8,000 OEM customers and building over a hundred COTS products that have never been discontinued. Technologic Systems’ pr...
While some vendors scramble to create and sell you a fancy solution for monitoring your spanking new Amazon Lambdas, hear how you can do it on the cheap using just built-in Java APIs yourself. By exploiting a little-known fact that Lambdas aren’t exactly single threaded, you can effectively identify hot spots in your serverless code. In his session at 20th Cloud Expo, David Martin, Principal Product Owner at CA Technologies, will give a live demonstration and code walkthrough, showing how to ov...
With major technology companies and startups seriously embracing Cloud strategies, now is the perfect time to attend @CloudExpo | @ThingsExpo, June 6-8, 2017, at the Javits Center in New York City, NY and October 31 - November 2, 2017, Santa Clara Convention Center, CA. Learn what is going on, contribute to the discussions, and ensure that your enterprise is on the right path to Digital Transformation.
SYS-CON Events announced today that Tappest will exhibit MooseFS at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. MooseFS is a breakthrough concept in the storage industry. It allows you to secure stored data with either duplication or erasure coding using any server. The newest – 4.0 version of the software enables users to maintain the redundancy level with even 50% less hard drive space required. The software func...
SYS-CON Events announced today that Outscale will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Outscale's technology makes an automated and adaptable Cloud available to businesses, supporting them in the most complex IT projects while controlling their operational aspects. You boost your IT infrastructure's reactivity, with request responses that only take a few seconds.
New competitors, disruptive technologies, and growing expectations are pushing every business to both adopt and deliver new digital services. This ‘Digital Transformation’ demands rapid delivery and continuous iteration of new competitive services via multiple channels, which in turn demands new service delivery techniques – including DevOps. In this power panel at @DevOpsSummit 20th Cloud Expo, moderated by DevOps Conference Co-Chair Andi Mann, panelists will examine how DevOps helps to meet th...