Welcome!

News Feed Item

Scottsdale Plastic Surgeon on Reducing Sagging Skin With Arm Lift Surgery

Though the Desire for Toned, Shapely Arms Has Skyrocketed in Popularity, Dr. Steven Turkeltaub Says That, for More Than a Quarter of a Century, He Has Been Successfully Treating Patients Who Have Loose, Hanging Upper Arm Skin by Performing Arm Lift Surger

SCOTTSDALE, AZ -- (Marketwired) -- 02/20/14 -- In recent years and for many reasons, the popularity of arm lift surgery (brachioplasty) has skyrocketed. Dr. Turkeltaub, however, has been performing this plastic surgery procedure for more than a quarter of a century on patients who have excessive and lax skin hanging from their arms. This procedure can result in firmer, smoother, more shapely and youthful appearing arms.

According to Dr. Turkeltaub, the major reasons that people develop lax and redundant skin of their arms are age, substantial weight loss and genetics. Because excess skin cannot be eliminated by exercise or weight lifting, Dr. Turkeltaub states that surgery, which involves the removal of excess skin and fat from the upper arms with contouring, is typically the only way to significantly tighten the skin. An arm lift (medically termed a brachioplasty) removes the excess skin and fat around the arm in order to create a more youthful and attractive contour.

"For the last several years, celebrities, and consequently the media, have been directly and indirectly publicizing shapely arms," noted Dr. Turkeltaub in a blog post titled "Shapely Arms Trending: Arm Lifts Gain Popularity." As a result, the public now has a vastly greater awareness of the surgical potentials for addressing arm skin laxity. "The reasons that patients are interested in undergoing arm lifts are still the same," notes Dr. Turkeltaub, "getting older or having lost a lot of weight, leaving them with unattractive, redundant and hanging skin which they want to correct."

At the Arizona Center for Aesthetic Plastic Surgery, Dr. Turkeltaub's Scottsdale plastic surgery practice, arm lifts are typically performed as an outpatient surgery. He says that the discomfort right after surgery is surprisingly mild and well tolerated by most of his patients. A compression garment is worn for the first two weeks after surgery and patients are instructed to wait at least three to four weeks before engaging in any heavy lifting or strenuous exercise. However, he does state that the details of the recovery process, including restrictions, will vary from patient to patient.

Dr. Turkeltaub notes that many of his arm lift patients combine the procedure with others including lower body lifts, tummy tucks, breast reduction, or breast augmentation with or without a breast lift for a more complete body rejuvenation.

Overall, Dr. Turkeltaub says that an arm lift can create a significant and quite worthwhile improvement in the appearance of the upper arms, helping many patients feel better about themselves and their appearance.

About Steven H. Turkeltaub, MD, PC
Steven H. Turkeltaub, MD is a graduate of an honors six-year medical program at Boston University and the Boston University School of Medicine. He is a board-certified plastic surgeon as well as the author of academic papers and textbook chapters on plastic surgery. Dr. Turkeltaub is a member of the American Society for Aesthetic Plastic Surgery, the American Society of Plastic Surgeons, the Arizona Society of Plastic and Reconstructive Surgeons, and many other medical organizations. Dr. Turkeltaub is available for interview upon request.

For more information about Dr. Turkeltaub and the Arizona Center for Aesthetic Plastic Surgery, visit turkeltaub.com, arizonabreast.com, or facebook.com/drturkeltaub.

To view the original source of this press release, click here: http://www.turkeltaub.com/arm-lift/scottsdale-plastic-surgeon-on-reducing-sagging-skin-with-arm-lift-surgery/.

Image Available: http://www2.marketwire.com/mw/frame_mw?attachid=2523564

Add to Digg Bookmark with del.icio.us Add to Newsvine

Arizona Center for Aesthetic Plastic Surgery

Scottsdale Office:
10290 N. 92nd St.
Suite 207
Scottsdale, AZ 85258

Glendale Office:
18275 N. 59th Ave.
Bldg. E, Suite 126
Glendale, AZ 85308

(480) 451-3000

Rosemont Media
Email Contact
(858) 200-0044
www.rosemontmedia.com

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
IoT solutions exploit operational data generated by Internet-connected smart “things” for the purpose of gaining operational insight and producing “better outcomes” (for example, create new business models, eliminate unscheduled maintenance, etc.). The explosive proliferation of IoT solutions will result in an exponential growth in the volume of IoT data, precipitating significant Information Governance issues: who owns the IoT data, what are the rights/duties of IoT solutions adopters towards t...
Get deep visibility into the performance of your databases and expert advice for performance optimization and tuning. You can't get application performance without database performance. Give everyone on the team a comprehensive view of how every aspect of the system affects performance across SQL database operations, host server and OS, virtualization resources and storage I/O. Quickly find bottlenecks and troubleshoot complex problems.
Whether your IoT service is connecting cars, homes, appliances, wearable, cameras or other devices, one question hangs in the balance – how do you actually make money from this service? The ability to turn your IoT service into profit requires the ability to create a monetization strategy that is flexible, scalable and working for you in real-time. It must be a transparent, smoothly implemented strategy that all stakeholders – from customers to the board – will be able to understand and comprehe...
Between 2005 and 2020, data volumes will grow by a factor of 300 – enough data to stack CDs from the earth to the moon 162 times. This has come to be known as the ‘big data’ phenomenon. Unfortunately, traditional approaches to handling, storing and analyzing data aren’t adequate at this scale: they’re too costly, slow and physically cumbersome to keep up. Fortunately, in response a new breed of technology has emerged that is cheaper, faster and more scalable. Yet, in meeting these new needs they...
Complete Internet of Things (IoT) embedded device security is not just about the device but involves the entire product’s identity, data and control integrity, and services traversing the cloud. A device can no longer be looked at as an island; it is a part of a system. In fact, given the cross-domain interactions enabled by IoT it could be a part of many systems. Also, depending on where the device is deployed, for example, in the office building versus a factory floor or oil field, security ha...
An IoT product’s log files speak volumes about what’s happening with your products in the field, pinpointing current and potential issues, and enabling you to predict failures and save millions of dollars in inventory. But until recently, no one knew how to listen. In his session at @ThingsExpo, Dan Gettens, Chief Research Officer at OnProcess, discussed recent research by Massachusetts Institute of Technology and OnProcess Technology, where MIT created a new, breakthrough analytics model for s...
When it comes to cloud computing, the ability to turn massive amounts of compute cores on and off on demand sounds attractive to IT staff, who need to manage peaks and valleys in user activity. With cloud bursting, the majority of the data can stay on premises while tapping into compute from public cloud providers, reducing risk and minimizing need to move large files. In his session at 18th Cloud Expo, Scott Jeschonek, Director of Product Management at Avere Systems, discussed the IT and busin...
"We are the public cloud providers. We are currently providing 50% of the resources they need for doing e-commerce business in China and we are hosting about 60% of mobile gaming in China," explained Yi Zheng, CPO and VP of Engineering at CDS Global Cloud, in this SYS-CON.tv interview at 19th Cloud Expo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
In his general session at 19th Cloud Expo, Manish Dixit, VP of Product and Engineering at Dice, discussed how Dice leverages data insights and tools to help both tech professionals and recruiters better understand how skills relate to each other and which skills are in high demand using interactive visualizations and salary indicator tools to maximize earning potential. Manish Dixit is VP of Product and Engineering at Dice. As the leader of the Product, Engineering and Data Sciences team at D...
Keeping pace with advancements in software delivery processes and tooling is taxing even for the most proficient organizations. Point tools, platforms, open source and the increasing adoption of private and public cloud services requires strong engineering rigor - all in the face of developer demands to use the tools of choice. As Agile has settled in as a mainstream practice, now DevOps has emerged as the next wave to improve software delivery speed and output. To make DevOps work, organization...
"We are a custom software development, engineering firm. We specialize in cloud applications from helping customers that have on-premise applications migrating to the cloud, to helping customers design brand new apps in the cloud. And we specialize in mobile apps," explained Peter Di Stefano, Vice President of Marketing at Impiger Technologies, in this SYS-CON.tv interview at 19th Cloud Expo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
"We're a cybersecurity firm that specializes in engineering security solutions both at the software and hardware level. Security cannot be an after-the-fact afterthought, which is what it's become," stated Richard Blech, Chief Executive Officer at Secure Channels, in this SYS-CON.tv interview at @ThingsExpo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
In this strange new world where more and more power is drawn from business technology, companies are effectively straddling two paths on the road to innovation and transformation into digital enterprises. The first path is the heritage trail – with “legacy” technology forming the background. Here, extant technologies are transformed by core IT teams to provide more API-driven approaches. Legacy systems can restrict companies that are transitioning into digital enterprises. To truly become a lead...
In IT, we sometimes coin terms for things before we know exactly what they are and how they’ll be used. The resulting terms may capture a common set of aspirations and goals – as “cloud” did broadly for on-demand, self-service, and flexible computing. But such a term can also lump together diverse and even competing practices, technologies, and priorities to the point where important distinctions are glossed over and lost.
Video experiences should be unique and exciting! But that doesn’t mean you need to patch all the pieces yourself. Users demand rich and engaging experiences and new ways to connect with you. But creating robust video applications at scale can be complicated, time-consuming and expensive. In his session at @ThingsExpo, Zohar Babin, Vice President of Platform, Ecosystem and Community at Kaltura, discussed how VPaaS enables you to move fast, creating scalable video experiences that reach your aud...