|By PR Newswire||
|February 21, 2014 02:00 PM EST||
DUBLIN, February 21, 2014 /PRNewswire/ --
Research and Markets (http://www.researchandmarkets.com/research/4rr4n3/3d_ics_market) has announced the addition of the "3D ICs Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast to 2019" report to their offering.
(Logo: http://photos.prnewswire.com/prnh/20130307/600769 )
The global 3D ICs market, valued at USD 2,408.2 million in 2012, is expected to see strong growth with 18.1% CAGR during 2013 to 2019. Global semiconductor industry is witnessing shift to 3D IC technology as it provides greater opportunity for developing a broader set of electronic systems and products with exceptional speed, reduction in the chip size, and low power consumption. Rising demand for solutions with improved performance and reduced response time, and growing number of portable devices such as smart-phones and tablets are some of the major factors to drive adoption of 3D ICs. However, high manufacturing and testing cost, lack of foundries and assembly houses to support this technology, thermal and testing issues, are some of the key challenges currently limiting the 3D ICs market growth worldwide.
3D IC technology finds its applications in various end-use sectors such as consumer electronics, military, information and communication technology, automotive and aerospace among others. IC manufacturers use different fabrication process for 3D ICs, depending upon requirements of the circuit system such as beam re-crystallization, wafer bonding, silicon epitaxial growth and solid phase crystallization.
Penetration of 3D IC technology in various applications is dependent on the need of interconnect density and cost related with particular process. Several industry products such as MEMS and sensors, RF SiP, memories, optoelectronics and imaging, logic (3D SiP/SoC) and HB LED are expected to adopt 3D IC integration. Among these products, MEMS and sensors' and memories are expected to emerge as leading segments. The increasing popularity of memory enhanced applications is expected to drive demand for the memory (3D stacks) segment in the near future. Geographically, Asia Pacific is expected to become largest market for 3D IC technology, with growth primarily supported by its emerging ICT and consumer electronics sector. Asia Pacific is expected to hold largest market share followed by North America throughout the forecast period.
Eyeing the growth potential with potential breakthrough for mass production, large number of semiconductor and packaging industry players have started to venture into 3D ICs market. Some of the key participants in this market include: Taiwan Semiconductor Manufacturing Co. Ltd. (TSMC), Micron Technology Inc. (Elpida Memory Inc.), Intel Corporation, Micron Technology Inc., TEZZARON Semiconductor, STATS ChipPAC Ltd., United Microelectronics Corporation (UMC), Samsung Electronics Co. Ltd., and MonolithIC 3D IC Inc., among others. Among these, players such as Taiwan Semiconductor Manufacturing Company, Ltd. (TSMC), Samsung Electronics Co., Xilinx Inc. Ltd., are considered to have dominant position in the market.
Key Topics Covered:
2 Executive Summary
3 3D ICs Market Overview
4 Global 3D ICs Market, by End-Use Industry
5 Global 3D ICs Market, by Substrate Type
6 Global 3D ICs Market, by Fabrication Process
7 Global 3D ICs Market, by Product
8 Global 3D ICs Market, by Geography
9 Company Profiles
- Elpida Memory, Inc. (Micron Technology, Inc.)
- MonolithIC 3D Inc.
- STATS ChipPAC Ltd.
- Taiwan Semiconductor Manufacturing Company, Ltd.
- Tezzaron Semiconductor Corporation
- The 3M Company
- United Microelectronics Corporation
- XILINX, Inc.
- Ziptronix, Inc.
For more information visit http://www.researchandmarkets.com/research/4rr4n3/3d_ics_market
Media Contact: Laura Wood , +353-1-481-1716, [email protected]
SOURCE Research and Markets
SYS-CON Events announced today that G2G3 will exhibit at SYS-CON's @DevOpsSummit Silicon Valley, which will take place on November 3–5, 2015, at the Santa Clara Convention Center in Santa Clara, CA. Based on a collective appreciation for user experience, design, and technology, G2G3 is uniquely qualified and motivated to redefine how organizations and people engage in an increasingly digital world.
Oct. 6, 2015 08:15 PM EDT Reads: 339
Recently announced Azure Data Lake addresses the big data 3V challenges; volume, velocity and variety. It is one more storage feature in addition to blobs and SQL Azure database. Azure Data Lake (should have been Azure Data Ocean IMHO) is really omnipotent. Just look at the key capabilities of Azure Data Lake:
Oct. 6, 2015 08:00 PM EDT Reads: 225
In his session at @ThingsExpo, Tony Shan, Chief Architect at CTS, will explore the synergy of Big Data and IoT. First he will take a closer look at the Internet of Things and Big Data individually, in terms of what, which, why, where, when, who, how and how much. Then he will explore the relationship between IoT and Big Data. Specifically, he will drill down to how the 4Vs aspects intersect with IoT: Volume, Variety, Velocity and Value. In turn, Tony will analyze how the key components of IoT ...
Oct. 6, 2015 08:00 PM EDT Reads: 306
When it comes to IoT in the enterprise, namely the commercial building and hospitality markets, a benefit not getting the attention it deserves is energy efficiency, and IoT’s direct impact on a cleaner, greener environment when installed in smart buildings. Until now clean technology was offered piecemeal and led with point solutions that require significant systems integration to orchestrate and deploy. There didn't exist a 'top down' approach that can manage and monitor the way a Smart Buildi...
Oct. 6, 2015 05:00 PM EDT Reads: 248
SYS-CON Events announced today that Cloud Raxak has been named “Media & Session Sponsor” of SYS-CON's 17th Cloud Expo, which will take place on November 3–5, 2015, at the Santa Clara Convention Center in Santa Clara, CA. Raxak Protect automates security compliance across private and public clouds. Using the SaaS tool or managed service, developers can deploy cloud apps quickly, cost-effectively, and without error.
Oct. 6, 2015 04:40 PM EDT
As-a-service models offer huge opportunities, but also complicate security. It may seem that the easiest way to migrate to a new architectural model is to let others, experts in their field, do the work. This has given rise to many as-a-service models throughout the industry and across the entire technology stack, from software to infrastructure. While this has unlocked huge opportunities to accelerate the deployment of new capabilities or increase economic efficiencies within an organization, i...
Oct. 6, 2015 03:00 PM EDT Reads: 115
“All our customers are looking at the cloud ecosystem as an important part of their overall product strategy. Some see it evolve as a multi-cloud / hybrid cloud strategy, while others are embracing all forms of cloud offerings like PaaS, IaaS and SaaS in their solutions,” noted Suhas Joshi, Vice President – Technology, at Harbinger Group, in this exclusive Q&A with Cloud Expo Conference Chair Roger Strukhoff.
Oct. 6, 2015 02:45 PM EDT Reads: 370
Scott Guthrie's keynote presentation "Journey to the intelligent cloud" is a must view video. This is from AzureCon 2015, September 29, 2015 I have reproduced some screen shots in case you are unable to view this long video for one reason or another. One of the highlights is 3 datacenters coming on line in India.
Oct. 6, 2015 02:00 PM EDT Reads: 227
SYS-CON Events announced today that ProfitBricks, the provider of painless cloud infrastructure, will exhibit at SYS-CON's 17th International Cloud Expo®, which will take place on November 3–5, 2015, at the Santa Clara Convention Center in Santa Clara, CA. ProfitBricks is the IaaS provider that offers a painless cloud experience for all IT users, with no learning curve. ProfitBricks boasts flexible cloud servers and networking, an integrated Data Center Designer tool for visual control over the...
Oct. 6, 2015 01:00 PM EDT Reads: 737
“The Internet of Things transforms the way organizations leverage machine data and gain insights from it,” noted Splunk’s CTO Snehal Antani, as Splunk announced accelerated momentum in Industrial Data and the IoT. The trend is driven by Splunk’s continued investment in its products and partner ecosystem as well as the creativity of customers and the flexibility to deploy Splunk IoT solutions as software, cloud services or in a hybrid environment. Customers are using Splunk® solutions to collect ...
Oct. 6, 2015 01:00 PM EDT Reads: 580
You have your devices and your data, but what about the rest of your Internet of Things story? Two popular classes of technologies that nicely handle the Big Data analytics for Internet of Things are Apache Hadoop and NoSQL. Hadoop is designed for parallelizing analytical work across many servers and is ideal for the massive data volumes you create with IoT devices. NoSQL databases such as Apache HBase are ideal for storing and retrieving IoT data as “time series data.”
Oct. 6, 2015 12:45 PM EDT Reads: 458
Clearly the way forward is to move to cloud be it bare metal, VMs or containers. One aspect of the current public clouds that is slowing this cloud migration is cloud lock-in. Every cloud vendor is trying to make it very difficult to move out once a customer has chosen their cloud. In his session at 17th Cloud Expo, Naveen Nimmu, CEO of Clouber, Inc., will advocate that making the inter-cloud migration as simple as changing airlines would help the entire industry to quickly adopt the cloud wit...
Oct. 6, 2015 12:30 PM EDT Reads: 581
As the world moves towards more DevOps and microservices, application deployment to the cloud ought to become a lot simpler. The microservices architecture, which is the basis of many new age distributed systems such as OpenStack, NetFlix and so on, is at the heart of Cloud Foundry - a complete developer-oriented Platform as a Service (PaaS) that is IaaS agnostic and supports vCloud, OpenStack and AWS. In his session at 17th Cloud Expo, Raghavan "Rags" Srinivas, an Architect/Developer Evangeli...
Oct. 6, 2015 12:15 PM EDT Reads: 106
Cloud computing delivers on-demand resources that provide businesses with flexibility and cost-savings. The challenge in moving workloads to the cloud has been the cost and complexity of ensuring the initial and ongoing security and regulatory (PCI, HIPAA, FFIEC) compliance across private and public clouds. Manual security compliance is slow, prone to human error, and represents over 50% of the cost of managing cloud applications. Determining how to automate cloud security compliance is critical...
Oct. 6, 2015 12:00 PM EDT Reads: 248
DevOps is gaining traction in the federal government – and for good reasons. Heightened user expectations are pushing IT organizations to accelerate application development and support more innovation. At the same time, budgetary constraints require that agencies find ways to decrease the cost of developing, maintaining, and running applications. IT now faces a daunting task: do more and react faster than ever before – all with fewer resources.
Oct. 6, 2015 12:00 PM EDT Reads: 338