|By Business Wire||
|February 25, 2014 09:12 AM EST||
Molex Incorporated announced its NeoScaleTM High-Speed Mezzanine System at DesignCon 2014, January 28-31, Santa Clara Convention Center in California. Delivering remarkably clean signal integrity at data rates of 28+ Gbps, the modular mezzanine interconnect is designed for high-density printed circuit board (PCB) mezzanine applications with limited PCB real estate. Industry applications include enterprise networking towers, telecommunication hubs and servers, industrial controllers, and medical and military high data-rate scanning equipment.
Comprised of a vertical plug and vertical receptacle, the NeoScale system features a patent pending modular triad wafer design which enables customizable PCB routing in high-density applications. Molex patented Solder-Charge Technology™ PCB attachment method provides for reliable and robust solder joints. This innovative design allows designers to mix and match 85Ω, 100Ω and power triads to build a mezzanine solution that meets their specific application requirements.
Adam Stanczak, global new product development manager, Molex, notes: “The flexible and robust NeoScale Mezzanine interconnect system utilizes differential pair triads with dedicated ground shields to offer exceptionally clean signal transmission compared to other mezzanine connectors available in the marketplace today. System architects and hardware engineers can count on a highly reliable and easily customizable design tool for a host of high density system applications.”
The modular NeoScale triad wafer comprises three pins per differential pair—two signal pins and one shield pin. Each triad is a stand-alone, shielded 28 Gbps capable differential pair or an 8A power feed and can be optimized for signals supporting high-speed 85Ω or 100Ω differential pairs, high-speed single-ended transmissions, low-speed single-ended/control signals, as well as power pins.
The honeycomb construction of the NeoScale mezzanine interconnect housing routes each triad to minimize crosstalk and effectively route out of the PCB in one or two layers, essentially saving designers in the cost of PCB material. In addition, unique tombstone structures located in the connector housing protect the mating interface and flexible contacts to help prevent damage to the terminals.
The Molex NeoScale system is available in 12.00 to 42.00mm stack heights, circuit sizes of 8 to 300 triad wafers in 2-, 4-, 6-, 8- and 10-rows and 85 or 100 Ohm impedance to provide optimal design flexibility to address engineering constraints in system envelopes.
For more information about the NeoScaleTM mezzanine interconnect system, please visit www.molex.com/link/neoscale.html. To receive information on other Molex products and industry solutions, please sign up for our e-nouncement newsletter at www.molex.com/link/register.
About Molex Incorporated
Providing more than connectors, Molex delivers complete interconnect solutions for a number of markets including: data communications, telecommunications, consumer electronics, industrial, automotive, commercial vehicle, aerospace and defense, medical, and lighting. Established in 1938, the company operates 45 manufacturing locations in 17 countries. The Molex website is www.molex.com. Follow us at www.twitter.com/molexconnectors, watch our videos at www.youtube.com/molexconnectors, connect with us at www.facebook.com/molexconnectors and read our blog at www.connector.com.
Molex is a registered trademark of Molex Incorporated.
WebRTC adoption has generated a wave of creative uses of communications and collaboration through websites, sales apps, customer care and business applications. As WebRTC has become more mainstream it has evolved to use cases beyond the original peer-to-peer case, which has led to a repeating requirement for interoperability with existing infrastructures. In his session at @ThingsExpo, Graham Holt, Executive Vice President of Daitan Group, will cover implementation examples that have enabled ea...
Sep. 28, 2016 01:00 AM EDT Reads: 1,556
Kubernetes is a new and revolutionary open-sourced system for managing containers across multiple hosts in a cluster. Ansible is a simple IT automation tool for just about any requirement for reproducible environments. In his session at @DevOpsSummit at 18th Cloud Expo, Patrick Galbraith, a principal engineer at HPE, discussed how to build a fully functional Kubernetes cluster on a number of virtual machines or bare-metal hosts. Also included will be a brief demonstration of running a Galera M...
Sep. 27, 2016 11:45 PM EDT Reads: 2,971
SYS-CON Events announced today that Tintri Inc., a leading producer of VM-aware storage (VAS) for virtualization and cloud environments, will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Tintri VM-aware storage is the simplest for virtualized applications and cloud. Organizations including GE, Toyota, United Healthcare, NASA and 6 of the Fortune 15 have said “No to LUNs.” With Tintri they mana...
Sep. 27, 2016 10:45 PM EDT Reads: 2,847
IoT offers a value of almost $4 trillion to the manufacturing industry through platforms that can improve margins, optimize operations & drive high performance work teams. By using IoT technologies as a foundation, manufacturing customers are integrating worker safety with manufacturing systems, driving deep collaboration and utilizing analytics to exponentially increased per-unit margins. However, as Benoit Lheureux, the VP for Research at Gartner points out, “IoT project implementers often ...
Sep. 27, 2016 10:45 PM EDT Reads: 3,401
The Jevons Paradox suggests that when technological advances increase efficiency of a resource, it results in an overall increase in consumption. Writing on the increased use of coal as a result of technological improvements, 19th-century economist William Stanley Jevons found that these improvements led to the development of new ways to utilize coal. In his session at 19th Cloud Expo, Mark Thiele, Chief Strategy Officer for Apcera, will compare the Jevons Paradox to modern-day enterprise IT, e...
Sep. 27, 2016 10:30 PM EDT Reads: 2,187
SYS-CON Events announced today the Enterprise IoT Bootcamp, being held November 1-2, 2016, in conjunction with 19th Cloud Expo | @ThingsExpo at the Santa Clara Convention Center in Santa Clara, CA. Combined with real-world scenarios and use cases, the Enterprise IoT Bootcamp is not just based on presentations but with hands-on demos and detailed walkthroughs. We will introduce you to a variety of real world use cases prototyped using Arduino, Raspberry Pi, BeagleBone, Spark, and Intel Edison. Y...
Sep. 27, 2016 09:30 PM EDT Reads: 2,973
Complete Internet of Things (IoT) embedded device security is not just about the device but involves the entire product’s identity, data and control integrity, and services traversing the cloud. A device can no longer be looked at as an island; it is a part of a system. In fact, given the cross-domain interactions enabled by IoT it could be a part of many systems. Also, depending on where the device is deployed, for example, in the office building versus a factory floor or oil field, security ha...
Sep. 27, 2016 09:30 PM EDT Reads: 490
Is your aging software platform suffering from technical debt while the market changes and demands new solutions at a faster clip? It’s a bold move, but you might consider walking away from your core platform and starting fresh. ReadyTalk did exactly that. In his General Session at 19th Cloud Expo, Michael Chambliss, Head of Engineering at ReadyTalk, will discuss why and how ReadyTalk diverted from healthy revenue and over a decade of audio conferencing product development to start an innovati...
Sep. 27, 2016 08:30 PM EDT Reads: 2,046
Fifty billion connected devices and still no winning protocols standards. HTTP, WebSockets, MQTT, and CoAP seem to be leading in the IoT protocol race at the moment but many more protocols are getting introduced on a regular basis. Each protocol has its pros and cons depending on the nature of the communications. Does there really need to be only one protocol to rule them all? Of course not. In his session at @ThingsExpo, Chris Matthieu, co-founder and CTO of Octoblu, walk you through how Oct...
Sep. 27, 2016 08:15 PM EDT Reads: 2,237
SYS-CON Events announced today that Bsquare has been named “Silver Sponsor” of SYS-CON's @ThingsExpo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. For more than two decades, Bsquare has helped its customers extract business value from a broad array of physical assets by making them intelligent, connecting them, and using the data they generate to optimize business processes.
Sep. 27, 2016 07:00 PM EDT Reads: 2,871
Whether they’re located in a public, private, or hybrid cloud environment, cloud technologies are constantly evolving. While the innovation is exciting, the end mission of delivering business value and rapidly producing incremental product features is paramount. In his session at @DevOpsSummit at 19th Cloud Expo, Kiran Chitturi, CTO Architect at Sungard AS, will discuss DevOps culture, its evolution of frameworks and technologies, and how it is achieving maturity. He will also cover various st...
Sep. 27, 2016 06:45 PM EDT Reads: 1,822
There are several IoTs: the Industrial Internet, Consumer Wearables, Wearables and Healthcare, Supply Chains, and the movement toward Smart Grids, Cities, Regions, and Nations. There are competing communications standards every step of the way, a bewildering array of sensors and devices, and an entire world of competing data analytics platforms. To some this appears to be chaos. In this power panel at @ThingsExpo, moderated by Conference Chair Roger Strukhoff, Bradley Holt, Developer Advocate a...
Sep. 27, 2016 06:30 PM EDT Reads: 2,214
Identity is in everything and customers are looking to their providers to ensure the security of their identities, transactions and data. With the increased reliance on cloud-based services, service providers must build security and trust into their offerings, adding value to customers and improving the user experience. Making identity, security and privacy easy for customers provides a unique advantage over the competition.
Sep. 27, 2016 06:30 PM EDT Reads: 3,575
SYS-CON Events announced today that Niagara Networks will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Niagara Networks offers the highest port-density systems, and the most complete Next-Generation Network Visibility systems including Network Packet Brokers, Bypass Switches, and Network TAPs.
Sep. 27, 2016 06:15 PM EDT Reads: 424
SYS-CON Events announced today that Secure Channels will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. The bedrock of Secure Channels Technology is a uniquely modified and enhanced process based on superencipherment. Superencipherment is the process of encrypting an already encrypted message one or more times, either using the same or a different algorithm.
Sep. 27, 2016 06:00 PM EDT Reads: 1,704