Welcome!

News Feed Item

Kombat Copper Defines the W800 Extension With Resource Calculation Underway

TORONTO, ONTARIO -- (Marketwired) -- 02/28/14 -- Kombat Copper Inc. ("Kombat Copper" or the "Company") (TSX VENTURE:KBT) has completed a detailed review of its extensive historical data base and verified material drill information to infill a previously unidentified zone of mineralization between the Asis Far West ("AFW") Sector and previous mine workings to the east of the Asis West Area a distance of some 300 meters known as the W800 Extension (Figure 1). The W800 Extension is up-plunge of the drilled defined AFW Sector in an area with no previous underground access and limited drill testing.

Approximately 90 meters west of the exploration-developed drift on the 12 level, a drill intersection (Au12/200) of 16.0 meters grading 10.35% Cu was defined. Another intersection (Au12/177) of 6.0 meters grading 3.59% Cu has been identified in the same zone. Historic assays are as follows:


----------------------------------------------------------------------------
              Table 1: Historic Results for Drill Hole Au12/200             
----------------------------------------------------------------------------
Hole ID           From (m)          To (m)        Length (m)            Cu %
----------------------------------------------------------------------------
Au12/200               105             107                 2            1.60
----------------------------------------------------------------------------
Au12/200               107             109                 2            2.79
----------------------------------------------------------------------------
Au12/200               109             111                 2           18.18
----------------------------------------------------------------------------
Au12/200               111             113                 2           20.10
----------------------------------------------------------------------------
Au12/200               113             116                 3           19.92
----------------------------------------------------------------------------
Au12/200               116             118                 2            6.56
----------------------------------------------------------------------------
Au12/200               118             121                 3            2.45
----------------------------------------------------------------------------
TOTAL                                                     16           10.35
----------------------------------------------------------------------------
----------------------------------------------------------------------------
              Table 2: Historic Results for Drill Hole Au12/177             
----------------------------------------------------------------------------
Hole ID           From (m)          To (m)        Length (m)            Cu %
----------------------------------------------------------------------------
Au12/177               115             118                 3            1.22
----------------------------------------------------------------------------
Au12/177               118             119                 1            7.17
----------------------------------------------------------------------------
Au12/177               119             120                 1            0.41
----------------------------------------------------------------------------
Au12/177               120             121                 1           10.27
----------------------------------------------------------------------------
TOTAL                                                      6            3.59
----------------------------------------------------------------------------

Several hundred meters further to the west of stopes on 12 level (Figure 1), surface drill holes have intersected 3.7 meters assaying 6.5% Cu (AW90A), 4.0 meters assaying 1.78% Cu (AW90C) and 2.5 meters assaying 2.58% Cu (AW115A). Due to the limited nature of the historic mineralized intersections the true width cannot be determined. Original assay files and drill logs have been found and the data has been verified.

In February of 2013, Kombat Copper completed a diamond drill core re-sampling program from the historic AFW Sector. The best result is from diamond drill hole AW101A located at the eastern edge of the AFW Sector, that returned 10 meters of 8% copper and 124 g/t silver. A resampling of hole AW90C, mentioned above, is located in the W800 Extension Sector and returned 7.66% Cu but over a core length of 3.2 meters. This is a significant upgrade to that historically reported.

From this information, it is now interpreted that significant widths of copper mineralization can be defined to within 150 meters of the AFW Sector and any future drilling will target the continuity of the mineralized system in an effort to join up the Asis West and Asis Far West Sectors.

Kombat Copper's recently completed geological reinterpretation for the area supports the concept of the emplacement of this historically defined copper mineralization and may ultimately expand its mineralization inventory as Kombat progresses with additional drill definition.

The Company anticipates publishing a mineral resource estimate for the AFW Sector by the end of the first quarter of this year. This mineral resource estimate shall contribute to the ongoing Preliminary Economic Assessment (PEA) of the Kombat Mine, targeted for release early third quarter of 2014.

The Company has also determined that the brownfields restart of the Kombat mine could be accomplished quickly and with relatively low capital cost if initial production rates of 500-700 tonnes per day are considered. Kombat's objective would be to ramp up to 1,100 tonnes per day (the design capacity of the current mill) over a 1 to 2 year period as more forward development is completed and the mill is returned to its proven design capacity. It appears that existing infrastructure will require minimal rehabilitation and existing underground development will allow a quick ramp up of production in the event economic viability is determined in the PEA.

PDAC Investor Exchange

Kombat Copper will be attending the PDAC Investor Exchange March 2nd and 3rd. The Company looks forward to updating its shareholders and interested investors in person at Booth #2221.

About Kombat Copper

Kombat Copper (TSX VENTURE:KBT) is a publicly traded Canadian exploration and development company with its core operations focused on copper resources in Namibia, one of the world's most prospective copper regions, where it has substantial assets in place with significant exploration upside.

The Company holds an 80% interest in five mining licenses in the Otavi Mountainlands, an area of Namibia particularly known for its high-grade copper deposits. Within these licenses are three past-producing mines including the Company's flagship property: the past-producing Kombat Mine. The Kombat Mine's extensive infrastructure includes an 800m production shaft which was opened in 2006, three recently-operational shafts, ramp systems, extensive underground workings, mine buildings, a tailings facility, a mill and concentrator all supported by the Company's local town site. The Kombat mine originally opened in 1962 and historically produced approx. 8.7 million tonnes of ore grading 3.1% copper and is linked to vital existing infrastructure, including power, water, roads, and rail with close proximity to the port of Walvis Bay and to one of only five commercial-grade smelters in Africa located in Tsumeb, located 100 road kilometers away from Kombat.

In addition to mining licenses, the Company holds an 80% interest in five Exclusive Prospecting Licenses ("EPLs") covering an area of more than 1550 km2. The EPLs are located also within the copper-rich Otavi Mountainlands and are in close proximity to Tsumeb.

Qualified Person

F. W. Nielsen, P.Geo., President and CEO of Kombat Copper, is a "qualified person" as such term is defined in National Instrument 43-101 and has reviewed and approved the technical information and data included in this press release.

Cautionary Notes

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

This news release may contain forward-looking statements. These statements include statements regarding the Company's plans for the Kombat Mine, its expectations for the Kombat Mine and the expected effect on the Company's financial and operating results. These statements are based on current expectations and assumptions that are subject to risks and uncertainties. Actual results could differ materially because of factors discussed in the management discussion and analysis section of our interim and most recent annual financial statements or other reports and filings with the TSX Venture Exchange and applicable Canadian securities regulations. We do not assume any obligation to update any forward-looking statements, except as required by applicable laws.

To view Figure 1: Kombat Mine Longitudinal Section, please visit the following link: http://media3.marketwire.com/docs/KBT228-F1.pdf

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
When people aren’t talking about VMs and containers, they’re talking about serverless architecture. Serverless is about no maintenance. It means you are not worried about low-level infrastructural and operational details. An event-driven serverless platform is a great use case for IoT. In his session at @ThingsExpo, Animesh Singh, an STSM and Lead for IBM Cloud Platform and Infrastructure, will detail how to build a distributed serverless, polyglot, microservices framework using open source tec...
The 19th International Cloud Expo has announced that its Call for Papers is open. Cloud Expo, to be held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA, brings together Cloud Computing, Big Data, Internet of Things, DevOps, Digital Transformation, Microservices and WebRTC to one location. With cloud computing driving a higher percentage of enterprise IT budgets every year, it becomes increasingly important to plant your flag in this fast-expanding business opportuni...
"We're bringing out a new application monitoring system to the DevOps space. It manages large enterprise applications that are distributed throughout a node in many enterprises and we manage them as one collective," explained Kevin Barnes, President of eCube Systems, in this SYS-CON.tv interview at DevOps at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
“Being the one true cloud-agnostic and storage-agnostic software solution, more and more customers are coming to Commvault and saying ' What do you recommend? What's your best practice for implementing cloud?” explained Randy De Meno, Chief Technologist at Commvault, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
From wearable activity trackers to fantasy e-sports, data and technology are transforming the way athletes train for the game and fans engage with their teams. In his session at @ThingsExpo, will present key data findings from leading sports organizations San Francisco 49ers, Orlando Magic NBA team. By utilizing data analytics these sports orgs have recognized new revenue streams, doubled its fan base and streamlined costs at its stadiums. John Paul is the CEO and Founder of VenueNext. Prior ...
Let’s face it, embracing new storage technologies, capabilities and upgrading to new hardware often adds complexity and increases costs. In his session at 18th Cloud Expo, Seth Oxenhorn, Vice President of Business Development & Alliances at FalconStor, discussed how a truly heterogeneous software-defined storage approach can add value to legacy platforms and heterogeneous environments. The result reduces complexity, significantly lowers cost, and provides IT organizations with improved efficienc...
Continuous testing helps bridge the gap between developing quickly and maintaining high quality products. But to implement continuous testing, CTOs must take a strategic approach to building a testing infrastructure and toolset that empowers their team to move fast. Download our guide to laying the groundwork for a scalable continuous testing strategy.
A critical component of any IoT project is what to do with all the data being generated. This data needs to be captured, processed, structured, and stored in a way to facilitate different kinds of queries. Traditional data warehouse and analytical systems are mature technologies that can be used to handle certain kinds of queries, but they are not always well suited to many problems, particularly when there is a need for real-time insights.
CenturyLink has announced that application server solutions from GENBAND are now available as part of CenturyLink’s Networx contracts. The General Services Administration (GSA)’s Networx program includes the largest telecommunications contract vehicles ever awarded by the federal government. CenturyLink recently secured an extension through spring 2020 of its offerings available to federal government agencies via GSA’s Networx Universal and Enterprise contracts. GENBAND’s EXPERiUS™ Application...
"My role is working with customers, helping them go through this digital transformation. I spend a lot of time talking to banks, big industries, manufacturers working through how they are integrating and transforming their IT platforms and moving them forward," explained William Morrish, General Manager Product Sales at Interoute, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Internet of @ThingsExpo, taking place November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA, is co-located with the 19th International Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world and ThingsExpo Silicon Valley Call for Papers is now open.
Big Data engines are powering a lot of service businesses right now. Data is collected from users from wearable technologies, web behaviors, purchase behavior as well as several arbitrary data points we’d never think of. The demand for faster and bigger engines to crunch and serve up the data to services is growing exponentially. You see a LOT of correlation between “Cloud” and “Big Data” but on Big Data and “Hybrid,” where hybrid hosting is the sanest approach to the Big Data Infrastructure pro...
In his session at 18th Cloud Expo, Sagi Brody, Chief Technology Officer at Webair Internet Development Inc., and Logan Best, Infrastructure & Network Engineer at Webair, focused on real world deployments of DDoS mitigation strategies in every layer of the network. He gave an overview of methods to prevent these attacks and best practices on how to provide protection in complex cloud platforms. He also outlined what we have found in our experience managing and running thousands of Linux and Unix ...
The IoT is changing the way enterprises conduct business. In his session at @ThingsExpo, Eric Hoffman, Vice President at EastBanc Technologies, discussed how businesses can gain an edge over competitors by empowering consumers to take control through IoT. He cited examples such as a Washington, D.C.-based sports club that leveraged IoT and the cloud to develop a comprehensive booking system. He also highlighted how IoT can revitalize and restore outdated business models, making them profitable ...
"We view the cloud not really as a specific technology but as a way of doing business and that way of doing business is transforming the way software, infrastructure and services are being delivered to business," explained Matthew Rosen, CEO and Director at Fusion, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.