|By Marketwired .||
|March 7, 2014 08:00 AM EST||
VANCOUVER, BRITISH COLUMBIA -- (Marketwired) -- 03/07/14 -- Canamex Resources Corp. (TSX VENTURE: CSQ) (OTCQX: CNMXF) (FRANKFURT: CX6) (the "Company") is pleased to announce that it has commenced diamond drilling at its Bruner gold project located in Nye County, Nevada.
The 2014 drilling program will consist of approximately 1000 metres (3280 feet) of core drilling and 9000 metres (29,500 feet) of reverse circulation ("RC") drilling. Core drilling will start with an offset of the last RC hole drilled in 2013, B-1340, which penetrated the interpreted "feeder zone" of the historic resource area and intersected 57.9 metres of 5.23 gpt gold (190 feet at 0.155 opt gold), before losing circulation in a fracture zone while still in mineralized material (see Canamex News Release dated November 5, 2013). A total of 5 core holes and 24 RC holes are planned to test this high-grade feeder zone in the historic resource area.
Drilling at the Penelas East discovery area will focus on testing the prominent VLF-EM current density and coincident gold-in-soil anomalies that are similar, and appear to be extensions of, the prominent VLF- EM current density anomaly that is coincident with the 38 gold-bearing drill hole intercepts completed in 2012-2103 at the Penelas East discovery area (see Canamex News Release dated October 25, 2013). A total of 24 holes are planned in the Penelas East discovery area, one or two of which will be drilled as core for geologic control.
Plan maps showing the proposed drill hole locations at both deposit areas are posted to the web site at the following link: http://www.canamex.us/?page_id=709.
The Company is embarking on the above-referenced 2014 exploration drilling program at the Bruner Project upon closing of the recently announced private placement (see News Release dated February 28, 2014). The drilling program is expected to take six months to complete, and cost approximately $1.75 million. The Company believes it is sufficiently financed to carry out the subject drilling program.
Canamex President and COO Greg Hahn Comments:
"We are excited to be able to recommence drilling at the Bruner gold project and to follow-up on the exciting drill hole intercepts we encountered at both the historic resource area and the Penelas East discovery area in 2013. The drilling of the high-grade feeder zone at the historic resource area has the potential to materially assist in the assessment of the grade of any future NI 43-101 mineral resource estimate on the property, as demonstrated by the positive impact the results of drill hole B-1340 had on the average grade of the intercepts on the section on which it was drilled. The drilling of the extensive VLF-EM current density anomalies at the Penelas East area has the potential to significantly increase the size of that discovery area. In combination, the 2014 drilling program has the potential to significantly advance our efforts in proceeding to delineate our first National Instrument 43-101 mineral resource estimate on the Bruner gold project."
Greg Hahn, President & COO and a Certified Professional Geologist (#7122) is the Qualified Person under National Instrument 43-101 ("NI 43-101") responsible for preparing and reviewing the scientific and technical information contained in this press release.
ON BEHALF OF THE BOARD
Robert Kramer, CEO and Director
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
This news release includes certain forward-looking statements or information. All statements other than statements of historical fact included in this release are forward-looking statements that involve various risks and uncertainties. Forward-looking statements in this news release include statements in relation to the timing, cost and other aspects of the planned 2014 drilling program on the Bruner property; the potential for establishing a NI 43-101 mineral resource estimate; the potential mineralization and geological merits of the Bruner property; and other future plans, objectives or expectations of the Company. There can be no assurance that such statements will prove to be accurate and actual results and future events could differ materially from those anticipated in such statements. Important factors that could cause actual results to differ materially from the Company's plans or expectations include the risk that actual results of current and planned exploration activities, including the results of the Company's planned 2014 drilling program(s) on the Bruner property, will not be consistent with the Company's expectations; the geology, grade and continuity of any mineral deposits and the risk of unexpected variations in mineral resources, grade and/or recovery rates; fluctuating metals prices; possibility of accidents, equipment breakdowns and delays during exploration; exploration cost overruns or unanticipated costs and expenses; uncertainties involved in the interpretation of drilling results and geological tests; availability of capital and financing required to continue the Company's future exploration programs and preparation of geological reports and studies; delays in the preparation of geological reports and studies; the metallurgical characteristics of mineralization contained within the Bruner property are yet to be fully determined; general economic, market or business conditions; competition and loss of key employees; regulatory changes and restrictions including in relation to required permits for exploration activities (including drilling permits) and environmental liability; timeliness of government or regulatory approvals; and other risks detailed herein and from time to time in the filings made by the Company with securities regulators. In connection with the forward-looking information contained in this news release, the Company has made numerous assumptions, including that the Company's 2014 exploration programs will proceed as planned and within budget. The Company expressly disclaims any intention or obligation to update or revise any forward-looking statements whether as a result of new information, future events or otherwise, except as otherwise required by applicable securities legislation.
Canamex Resources Corp.
CEO and Director
In IT, we sometimes coin terms for things before we know exactly what they are and how they’ll be used. The resulting terms may capture a common set of aspirations and goals – as “cloud” did broadly for on-demand, self-service, and flexible computing. But such a term can also lump together diverse and even competing practices, technologies, and priorities to the point where important distinctions are glossed over and lost.
Dec. 10, 2016 11:45 PM EST Reads: 1,794
"We're a cybersecurity firm that specializes in engineering security solutions both at the software and hardware level. Security cannot be an after-the-fact afterthought, which is what it's become," stated Richard Blech, Chief Executive Officer at Secure Channels, in this SYS-CON.tv interview at @ThingsExpo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
Dec. 10, 2016 11:15 PM EST Reads: 1,218
All clouds are not equal. To succeed in a DevOps context, organizations should plan to develop/deploy apps across a choice of on-premise and public clouds simultaneously depending on the business needs. This is where the concept of the Lean Cloud comes in - resting on the idea that you often need to relocate your app modules over their life cycles for both innovation and operational efficiency in the cloud. In his session at @DevOpsSummit at19th Cloud Expo, Valentin (Val) Bercovici, CTO of Soli...
Dec. 10, 2016 10:15 PM EST Reads: 2,072
"Once customers get a year into their IoT deployments, they start to realize that they may have been shortsighted in the ways they built out their deployment and the key thing I see a lot of people looking at is - how can I take equipment data, pull it back in an IoT solution and show it in a dashboard," stated Dave McCarthy, Director of Products at Bsquare Corporation, in this SYS-CON.tv interview at @ThingsExpo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
Dec. 10, 2016 09:15 PM EST Reads: 1,354
Everyone knows that truly innovative companies learn as they go along, pushing boundaries in response to market changes and demands. What's more of a mystery is how to balance innovation on a fresh platform built from scratch with the legacy tech stack, product suite and customers that continue to serve as the business' foundation. In his General Session at 19th Cloud Expo, Michael Chambliss, Head of Engineering at ReadyTalk, discussed why and how ReadyTalk diverted from healthy revenue and mor...
Dec. 10, 2016 07:30 PM EST Reads: 1,820
Whether your IoT service is connecting cars, homes, appliances, wearable, cameras or other devices, one question hangs in the balance – how do you actually make money from this service? The ability to turn your IoT service into profit requires the ability to create a monetization strategy that is flexible, scalable and working for you in real-time. It must be a transparent, smoothly implemented strategy that all stakeholders – from customers to the board – will be able to understand and comprehe...
Dec. 10, 2016 07:00 PM EST Reads: 4,156
What happens when the different parts of a vehicle become smarter than the vehicle itself? As we move toward the era of smart everything, hundreds of entities in a vehicle that communicate with each other, the vehicle and external systems create a need for identity orchestration so that all entities work as a conglomerate. Much like an orchestra without a conductor, without the ability to secure, control, and connect the link between a vehicle’s head unit, devices, and systems and to manage the ...
Dec. 10, 2016 06:45 PM EST Reads: 1,105
You have great SaaS business app ideas. You want to turn your idea quickly into a functional and engaging proof of concept. You need to be able to modify it to meet customers' needs, and you need to deliver a complete and secure SaaS application. How could you achieve all the above and yet avoid unforeseen IT requirements that add unnecessary cost and complexity? You also want your app to be responsive in any device at any time. In his session at 19th Cloud Expo, Mark Allen, General Manager of...
Dec. 10, 2016 06:30 PM EST Reads: 1,972
The Internet of Things (IoT) promises to simplify and streamline our lives by automating routine tasks that distract us from our goals. This promise is based on the ubiquitous deployment of smart, connected devices that link everything from industrial control systems to automobiles to refrigerators. Unfortunately, comparatively few of the devices currently deployed have been developed with an eye toward security, and as the DDoS attacks of late October 2016 have demonstrated, this oversight can ...
Dec. 10, 2016 06:30 PM EST Reads: 1,551
SYS-CON Events has announced today that Roger Strukhoff has been named conference chair of Cloud Expo and @ThingsExpo 2017 New York. The 20th Cloud Expo and 7th @ThingsExpo will take place on June 6-8, 2017, at the Javits Center in New York City, NY. "The Internet of Things brings trillions of dollars of opportunity to developers and enterprise IT, no matter how you measure it," stated Roger Strukhoff. "More importantly, it leverages the power of devices and the Internet to enable us all to im...
Dec. 10, 2016 06:30 PM EST Reads: 1,034
More and more brands have jumped on the IoT bandwagon. We have an excess of wearables – activity trackers, smartwatches, smart glasses and sneakers, and more that track seemingly endless datapoints. However, most consumers have no idea what “IoT” means. Creating more wearables that track data shouldn't be the aim of brands; delivering meaningful, tangible relevance to their users should be. We're in a period in which the IoT pendulum is still swinging. Initially, it swung toward "smart for smar...
Dec. 10, 2016 06:15 PM EST Reads: 1,096
"ReadyTalk is an audio and web video conferencing provider. We've really come to embrace WebRTC as the platform for our future of technology," explained Dan Cunningham, CTO of ReadyTalk, in this SYS-CON.tv interview at WebRTC Summit at 19th Cloud Expo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
Dec. 10, 2016 05:30 PM EST Reads: 1,012
Financial Technology has become a topic of intense interest throughout the cloud developer and enterprise IT communities. Accordingly, attendees at the upcoming 20th Cloud Expo at the Javits Center in New York, June 6-8, 2017, will find fresh new content in a new track called FinTech.
Dec. 10, 2016 05:15 PM EST Reads: 2,384
Bert Loomis was a visionary. This general session will highlight how Bert Loomis and people like him inspire us to build great things with small inventions. In their general session at 19th Cloud Expo, Harold Hannon, Architect at IBM Bluemix, and Michael O'Neill, Strategic Business Development at Nvidia, discussed the accelerating pace of AI development and how IBM Cloud and NVIDIA are partnering to bring AI capabilities to "every day," on-demand. They also reviewed two "free infrastructure" pr...
Dec. 10, 2016 05:15 PM EST Reads: 1,426
Without lifecycle traceability and visibility across the tool chain, stakeholders from Planning-to-Ops have limited insight and answers to who, what, when, why and how across the DevOps lifecycle. This impacts the ability to deliver high quality software at the needed velocity to drive positive business outcomes. In his general session at @DevOpsSummit at 19th Cloud Expo, Phil Hombledal, Solution Architect at CollabNet, discussed how customers are able to achieve a level of transparency that e...
Dec. 10, 2016 04:30 PM EST Reads: 1,374