|By PR Newswire||
|March 13, 2014 11:30 PM EDT||
DALLAS, March 14, 2014 /PRNewswire/ --
ReportsnReports.com offers "Global and China Carbon Fiber Industry Report, 2013-2016", "2014 Deep Research Report on Global And China Activated Carbon Fiber (ACF) Industry" and "Global and China Activated Carbon Industry Report, 2013-2016" research reports in its store.
The Global and China Carbon Fiber Industry Report, 2013-2016 available at http://www.reportsnreports.com/reports/275172-global-and-china-carbon-fiber-industry-report-2013-2016.html says carbon fiber is the new-generation reinforced fiber, mainly used in the fields of aerospace, wind power, automotive, sports and leisure. In 2013, the global industrial applications like wind power and automobiles showed the largest demand for carbon fiber, namely more than 60%, followed by aerospace, with the growing proportion of carbon fiber application and hence the demand steadily increased; while the growth of demand from sports and leisure was relatively slow.
In 2013, the global carbon fiber capacity totaled approximately 120,000 tons, mainly contributed by Japan and the U.S.. The world's top five companies -- Toray, Teijin, Zoltek, Mitsubishi Rayon and Formosa Plastics shared 55% of the global carbon fiber capacity together. In September, 2013, Toray acquired Zoltek to raise its market share to about 30%.
Carbon fiber is primarily divided into PAN-based carbon fiber whose utilization rate hits about 95%, and pitch-based carbon fiber. In 2013, two-thirds of the global small-tow (≤ 24K) PAN-based carbon fiber was produced by Toray, Teijin and Mitsubishi Rayon; three-fourths of the large-tow (> 24K) PAN-based carbon fiber was made by Zoltek and SGL; half of pitch-based carbon fiber was created by Kureha.
In 2009-2013, China's carbon fiber capacity grew at the CAGR of up to 53.5%, reaching 18,000 tons or so in 2013. However, the immature technology of Chinese carbon fiber manufacturers resulted in low quality, high production costs and poor profitability. In 2013, China's actual carbon fiber output was only about 3,000 tons, with the import dependency rate of around 76%.
In 2013, there were more than 20 Chinese carbon fiber manufacturers, such as Jiangsu Hengshen Fiber Material, Zhongfu Shenying Carbon Fiber, Bluestar Fibres, Tianhua Excel-Way Special Fiber (Xintai) and Weihai Tuozhan Fiber. But, only Jiangsu Hengshen Fiber Material and Zhongfu Shenying Carbon Fiber achieved the respective output of 1,000 tons or so.
Currently, numerous proposed and ongoing projects of China carbon fiber industry embrace Jiangcheng Carbon Fiber Project Phase II (1,500 tons / a) and Shanghai Petrochemical 3,000 tons / a Carbon Fiber Precursor and 1,500 tons / a Carbon Fiber Project, both of which are planned to be put into production in 2014.
Global and China Carbon Fiber Industry Report, 2013-2016, available for purchase at http://www.reportsnreports.com/Purchase.aspx?name=275172, mainly covers the followings:
- Supply and demand, competition pattern and price analysis of the global carbon fiber industry;
- Supply and demand, competition pattern, import and export, price, proposed and ongoing projects of China carbon fiber industry;
- Operation and carbon fiber business of nine overseas carbon fiber manufacturers;
- Operation, carbon fiber business and development forecast of nine carbon fiber manufacturers as well as the development trends of 20 carbon fiber producers in mainland China.
- Summary of global carbon fiber production enterprises and forecast for supply and demand of China carbon fiber industry.
The 2014 Deep Research Report on Global And China Activated Carbon Fiber (ACF) Industry available at http://www.reportsnreports.com/reports/275006-2014-deep-research-report-on-global-and-china-activated-carbon-fiber-acf-industry.html is published in Feb 2014 and is of 158 pages. Companies profiled and analyzed in this report include Toyobo, Kuraray, Unitika, GCI, Etese, TCT, Anhui Jialiqi ACF Co., Ltd, Sutong Carbon Fiber, Jiangsu Tongkang, Nantong Yongtong, Jiangsu Kejing Carbon Fiber CO.,LTD and Qinhuangdao Zichuan. Providing 117 data tables and figures on the activated carbon fiber market, this research report can be purchased at http://www.reportsnreports.com/Purchase.aspx?name=275006 .
Activated carbon as a kind of effective adsorbent finds wide application in water treatment, food & beverage, metallurgy, chemical, pharmaceutical and automotive industries. The report titled Global and China Activated Carbon Industry Report, 2013-2016 and available at http://www.reportsnreports.com/reports/275437-global-and-china-activated-carbon-industry-report-2013-2016.html says, in 2013, the capacity of activated carbon across the globe outnumbered 2 million tons/a, as opposed to the demand approximating 1.3 million tons/a, which was an indicative of severe overcapacity. Thus, a grim situation to integrate or eliminate capacities is expected to linger in the future. On a global basis, activated carbon capacity largely concentrates in a few of countries or regions including the U.S., Japan, Western Europe and China. In particular, the capacities in the United States, Japan and Western Europe are dominated by a small number of industrial players, such as America-based Calgon Carbon Corporation with activated carbon capacity over 75,000 tons/a, and Cabot Norit with the capacity of 60,000 tons/a. Others included Japan-based Osaka Gas Chemicals Co., Ltd. which was promoted to the world's third largest activated carbon producer through taking over Jacobi Carbons in October 2013. Also, Osaka Gas Chemicals has grown into the largest producer in cocoanut active charcoal market segment.
China boasts the world's largest manufacturer of activated carbon, with the estimated capacity in 2013 approximating 700,000 tons. In the market segment, China is also regarded as the largest wooden activated carbon marker in the world, where there are numerous wooden activated carbon producers, but most of them are small-scaled enterprises with annual capacity between several hundreds of tons and thousands of tons. And few can realize the capacity breaking 10,000 tons. The production bases of wooden activated carbon are mostly founded in Fujian, Jiangxi, Zhejiang, Jiangsu and other regions with abundant forest resources, and the leading manufacturers cover Fujian Yuanli Active Carbon, Xinsen Carbon, and Zhixing Activated Carbon, the combined capacity of which claims 95,000 tons/a.
In China, the production of coaly activated carbon concentrates in the regions which abounds in coal resources including Shanxi, Ningxia and Inner Mongolia. And the top four coaly activated carbon producers in China come to Xinhua Activated Carbon, Huahui Carbon, Shenhua Ningxia Coal Industry Group and Xingtai Coal Chemical, each with the capacity above 50,000 tons/a on average.
As stringent environmental protection policies are progressively released, citing "Atmospheric Pollution Prevention Action Plan" concerning the prevention of air pollution as one example that issued by the State Council in Sep. 2013, China activated carbon industry is expected to embrace more development potentials. The estimate suggests the activated carbon output in China by 2016 will reach 751,200 tons, while the CAGR between 2013 and 2016 will be 9.7%. Order a copy of this report at http://www.reportsnreports.com/Purchase.aspx?name=275437 .
Explore more reports on the advanced materials market at http://www.reportsnreports.com/market-research/advanced-material/ . Other reports on multiple Chinese industries can be explored at http://www.reportsnreports.com/country/china/ .
ReportsnReports.com is an online market research reports library of 400,000+ in-depth studies of over 5000 micro markets. Our database includes reports by leading publishers from across the globe. We provide 24/7 online and offline support service to our customers.
TX, Dallas North - Dominion Plaza,
17304, Preston Road,
Suite 800, Dallas 75252
Connect With Us on:
Things are changing so quickly in IoT that it would take a wizard to predict which ecosystem will gain the most traction. In order for IoT to reach its potential, smart devices must be able to work together. Today, there are a slew of interoperability standards being promoted by big names to make this happen: HomeKit, Brillo and Alljoyn. In his session at @ThingsExpo, Adam Justice, vice president and general manager of Grid Connect, will review what happens when smart devices don’t work togethe...
Mar. 29, 2017 06:30 PM EDT Reads: 2,709
Building a cross-cloud operational model can be a daunting task. Per-cloud silos are not the answer, but neither is a fully generic abstraction plane that strips out capabilities unique to a particular provider. In his session at 20th Cloud Expo, Chris Wolf, VP & Chief Technology Officer, Global Field & Industry at VMware, will discuss how successful organizations approach cloud operations and management, with insights into where operations should be centralized and when it’s best to decentraliz...
Mar. 29, 2017 05:15 PM EDT Reads: 3,747
SYS-CON Events announced today that Juniper Networks (NYSE: JNPR), an industry leader in automated, scalable and secure networks, will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Juniper Networks challenges the status quo with products, solutions and services that transform the economics of networking. The company co-innovates with customers and partners to deliver automated, scalable and secure network...
Mar. 29, 2017 04:30 PM EDT Reads: 1,638
Deep learning has been very successful in social sciences and specially areas where there is a lot of data. Trading is another field that can be viewed as social science with a lot of data. With the advent of Deep Learning and Big Data technologies for efficient computation, we are finally able to use the same methods in investment management as we would in face recognition or in making chat-bots. In his session at 20th Cloud Expo, Gaurav Chakravorty, co-founder and Head of Strategy Development ...
Mar. 29, 2017 04:15 PM EDT Reads: 3,855
DevOps is often described as a combination of technology and culture. Without both, DevOps isn't complete. However, applying the culture to outdated technology is a recipe for disaster; as response times grow and connections between teams are delayed by technology, the culture will die. A Nutanix Enterprise Cloud has many benefits that provide the needed base for a true DevOps paradigm. In his Day 3 Keynote at 20th Cloud Expo, Chris Brown, a Solutions Marketing Manager at Nutanix, will explore t...
Mar. 29, 2017 04:00 PM EDT Reads: 3,177
Most companies are adopting or evaluating container technology - Docker in particular - to speed up application deployment, drive down cost, ease management and make application delivery more flexible overall. As with most new architectures, this dream takes a lot of work to become a reality. Even when you do get your application componentized enough and packaged properly, there are still challenges for DevOps teams to making the shift to continuous delivery and achieving that reduction in cost...
Mar. 29, 2017 03:15 PM EDT Reads: 304
SYS-CON Events announced today that SoftLayer, an IBM Company, has been named “Gold Sponsor” of SYS-CON's 18th Cloud Expo, which will take place on June 7-9, 2016, at the Javits Center in New York, New York. SoftLayer, an IBM Company, provides cloud infrastructure as a service from a growing number of data centers and network points of presence around the world. SoftLayer’s customers range from Web startups to global enterprises.
Mar. 29, 2017 03:15 PM EDT Reads: 2,225
Imagine having the ability to leverage all of your current technology and to be able to compose it into one resource pool. Now imagine, as your business grows, not having to deploy a complete new appliance to scale your infrastructure. Also imagine a true multi-cloud capability that allows live migration without any modification between cloud environments regardless of whether that cloud is your private cloud or your public AWS, Azure or Google instance. Now think of a world that is not locked i...
Mar. 29, 2017 03:15 PM EDT Reads: 723
Technology innovation is the driving force behind modern business and enterprises must respond by increasing the speed and efficiency of software delivery. The challenge is that existing enterprise applications are expensive to develop and difficult to modernize. This often results in what Gartner calls "Bimodal IT," where business struggle to apply modern tools and practices to traditional monolithic applications. But these existing assets can be modernized and made more efficient without havin...
Mar. 29, 2017 03:15 PM EDT Reads: 2,640
SYS-CON Events announced today that CA Technologies has been named “Platinum Sponsor” of SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY, and the 21st International Cloud Expo®, which will take place October 31-November 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. CA Technologies helps customers succeed in a future where every business – from apparel to energy – is being rewritten by software. From ...
Mar. 29, 2017 02:30 PM EDT Reads: 2,280
SYS-CON Events announced today that Auditwerx will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Auditwerx specializes in SOC 1, SOC 2, and SOC 3 attestation services throughout the U.S. and Canada. As a division of Carr, Riggs & Ingram (CRI), one of the top 20 largest CPA firms nationally, you can expect the resources, skills, and experience of a much larger firm combined with the accessibility and attent...
Mar. 29, 2017 02:30 PM EDT Reads: 698
SYS-CON Events announced today that Technologic Systems Inc., an embedded systems solutions company, will exhibit at SYS-CON's @ThingsExpo, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Technologic Systems is an embedded systems company with headquarters in Fountain Hills, Arizona. They have been in business for 32 years, helping more than 8,000 OEM customers and building over a hundred COTS products that have never been discontinued. Technologic Systems’ pr...
Mar. 29, 2017 02:30 PM EDT Reads: 3,822
SYS-CON Events announced today that HTBase will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. HTBase (Gartner 2016 Cool Vendor) delivers a Composable IT infrastructure solution architected for agility and increased efficiency. It turns compute, storage, and fabric into fluid pools of resources that are easily composed and re-composed to meet each application’s needs. With HTBase, companies can quickly prov...
Mar. 29, 2017 02:15 PM EDT Reads: 3,270
SYS-CON Events announced today that Loom Systems will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Founded in 2015, Loom Systems delivers an advanced AI solution to predict and prevent problems in the digital business. Loom stands alone in the industry as an AI analysis platform requiring no prior math knowledge from operators, leveraging the existing staff to succeed in the digital era. With offices in S...
Mar. 29, 2017 01:30 PM EDT Reads: 1,757
In his session at Cloud Expo, Alan Winters, an entertainment executive/TV producer turned serial entrepreneur, will present a success story of an entrepreneur who has both suffered through and benefited from offshore development across multiple businesses: The smart choice, or how to select the right offshore development partner Warning signs, or how to minimize chances of making the wrong choice Collaboration, or how to establish the most effective work processes Budget control, or how to max...
Mar. 29, 2017 01:30 PM EDT Reads: 558