Welcome!

News Feed Item

Concise Analysis of the International and Chinese Carbon Fiber Industry

DUBLIN, March 18, 2014 /PRNewswire/ --

Research and Markets (http://www.researchandmarkets.com/research/tww6g9/global_and) has announced the addition of the "Concise Analysis of the International and Chinese Carbon Fiber Industry" report to their offering.

     (Logo: http://photos.prnewswire.com/prnh/20130307/600769 )


Carbon fiber is the new-generation reinforced fiber, mainly used in the fields of aerospace, wind power, automotive, sports and leisure. In 2013, the global industrial applications like wind power and automobiles showed the largest demand for carbon fiber, namely more than 60%, followed by aerospace, with the growing proportion of carbon fiber application and hence the demand steadily increased; while the growth of demand from sports and leisure was relatively slow.

In 2013, the global carbon fiber capacity totaled approximately 120,000 tons, mainly contributed by Japan and the U.S.. The world's top five companies -- Toray, Teijin, Zoltek, Mitsubishi Rayon and Formosa Plastics shared 55% of the global carbon fiber capacity together. In September, 2013, Toray acquired Zoltek to raise its market share to about 30%.

Carbon fiber is primarily divided into PAN-based carbon fiber whose utilization rate hits about 95%, and pitch-based carbon fiber. In 2013, two-thirds of the global small-tow (= 24K) PAN-based carbon fiber was produced by Toray, Teijin and Mitsubishi Rayon; three-fourths of the large-tow (> 24K) PAN-based carbon fiber was made by Zoltek and SGL; half of pitch-based carbon fiber was created by Kureha.


Key Topics Covered:

1 Overview of Carbon Fiber

2 Global Carbon Fiber Market

3 Chinese Carbon Fiber Market

4 Key Overseas Companies

5 Key Enterprises in Mainland China

6 Summary and Forecast


Companies Mentioned:

  • Anhui Shouwen
  • Anhui Xinfeng
  • Anshan Sinocarb Carbon Fibers
  • Bluestar Weibang
  • CYTEC
  • Dalian Befut
  • Dalian Guorui
  • Formosa Plastics
  • HNEC Yongmei Carbon Fiber
  • Handan Silicon Valley (HSVC)
  • Hexcel
  • Jiangsu Hengshen
  • Jilin Jiyan High-tech Fibers
  • Jilin Petrochemical
  • Jilin Qifeng Chemical Fiber
  • Kingfa
  • Kureha
  • Mitsubishi Chemical Corporation
  • Ningxia Dayuan Chemical
  • Ordos Yaxin Carbon Fiber
  • SGL
  • Shandong Xintian
  • Shanghai Petrochemical
  • Shanxi Hengtian New Textile Fiber Tech
  • Shanxi Hongte
  • Shenyang Zhongheng New Materials
  • Sichuan Xinwanxing Carbon Fiber Composites
  • Sinosteel Jilin Carbon
  • Taiyuan Iron & Steel Group
  • Teijin
  • Tianshun Chemical
  • Toray
  • Weihai Tuozhan Fiber
  • Xi'an Carbon Materials
  • Xinjiang Chuangyue
  • Zhejiang Juxin Carbon Fiber
  • Zhongfu Shenying Carbon Fiber
  • Zoltek

For more information visit http://www.researchandmarkets.com/research/tww6g9/global_and


Media Contact: Laura Wood, +353-1-481-1716, [email protected]

 

SOURCE Research and Markets

More Stories By PR Newswire

Copyright © 2007 PR Newswire. All rights reserved. Republication or redistribution of PRNewswire content is expressly prohibited without the prior written consent of PRNewswire. PRNewswire shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon.

Latest Stories
“delaPlex Software provides software outsourcing services. We have a hybrid model where we have onshore developers and project managers that we can place anywhere in the U.S. or in Europe,” explained Manish Sachdeva, CEO at delaPlex Software, in this SYS-CON.tv interview at @ThingsExpo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Keeping pace with advancements in software delivery processes and tooling is taxing even for the most proficient organizations. Point tools, platforms, open source and the increasing adoption of private and public cloud services requires strong engineering rigor – all in the face of developer demands to use the tools of choice. As Agile has settled in as a mainstream practice, now DevOps has emerged as the next wave to improve software delivery speed and output. To make DevOps work, organization...
"We've discovered that after shows 80% if leads that people get, 80% of the conversations end up on the show floor, meaning people forget about it, people forget who they talk to, people forget that there are actual business opportunities to be had here so we try to help out and keep the conversations going," explained Jeff Mesnik, Founder and President of ContentMX, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Let’s face it, embracing new storage technologies, capabilities and upgrading to new hardware often adds complexity and increases costs. In his session at 18th Cloud Expo, Seth Oxenhorn, Vice President of Business Development & Alliances at FalconStor, discussed how a truly heterogeneous software-defined storage approach can add value to legacy platforms and heterogeneous environments. The result reduces complexity, significantly lowers cost, and provides IT organizations with improved efficienc...
SYS-CON Events announced today that Isomorphic Software will exhibit at DevOps Summit at 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Isomorphic Software provides the SmartClient HTML5/AJAX platform, the most advanced technology for building rich, cutting-edge enterprise web applications for desktop and mobile. SmartClient combines the productivity and performance of traditional desktop software with the simp...
"When you think about the data center today, there's constant evolution, The evolution of the data center and the needs of the consumer of technology change, and they change constantly," stated Matt Kalmenson, VP of Sales, Service and Cloud Providers at Veeam Software, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Internet of @ThingsExpo, taking place November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA, is co-located with the 19th International Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world and ThingsExpo Silicon Valley Call for Papers is now open.
The IoT is changing the way enterprises conduct business. In his session at @ThingsExpo, Eric Hoffman, Vice President at EastBanc Technologies, discussed how businesses can gain an edge over competitors by empowering consumers to take control through IoT. He cited examples such as a Washington, D.C.-based sports club that leveraged IoT and the cloud to develop a comprehensive booking system. He also highlighted how IoT can revitalize and restore outdated business models, making them profitable ...
In his session at @DevOpsSummit at 19th Cloud Expo, Yoseph Reuveni, Director of Software Engineering at Jet.com, will discuss Jet.com's journey into containerizing Microsoft-based technologies like C# and F# into Docker. He will talk about lessons learned and challenges faced, the Mono framework tryout and how they deployed everything into Azure cloud. Yoseph Reuveni is a technology leader with unique experience developing and running high throughput (over 1M tps) distributed systems with extre...
To leverage Continuous Delivery, enterprises must consider impacts that span functional silos, as well as applications that touch older, slower moving components. Managing the many dependencies can cause slowdowns. See how to achieve continuous delivery in the enterprise.
"delaPlex is a software development company. We do team-based outsourcing development," explained Mark Rivers, COO and Co-founder of delaPlex Software, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
We all know the latest numbers: Gartner, Inc. forecasts that 6.4 billion connected things will be in use worldwide in 2016, up 30 percent from last year, and will reach 20.8 billion by 2020. We're rapidly approaching a data production of 40 zettabytes a day – more than we can every physically store, and exabytes and yottabytes are just around the corner. For many that’s a good sign, as data has been proven to equal money – IF it’s ingested, integrated, and analyzed fast enough. Without real-ti...
"There's a growing demand from users for things to be faster. When you think about all the transactions or interactions users will have with your product and everything that is between those transactions and interactions - what drives us at Catchpoint Systems is the idea to measure that and to analyze it," explained Leo Vasiliou, Director of Web Performance Engineering at Catchpoint Systems, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York Ci...
I wanted to gather all of my Internet of Things (IOT) blogs into a single blog (that I could later use with my University of San Francisco (USF) Big Data “MBA” course). However as I started to pull these blogs together, I realized that my IOT discussion lacked a vision; it lacked an end point towards which an organization could drive their IOT envisioning, proof of value, app dev, data engineering and data science efforts. And I think that the IOT end point is really quite simple…
As companies gain momentum, the need to maintain high quality products can outstrip their development team’s bandwidth for QA. Building out a large QA team (whether in-house or outsourced) can slow down development and significantly increases costs. This eBook takes QA profiles from 5 companies who successfully scaled up production without building a large QA team and includes: What to consider when choosing CI/CD tools How culture and communication can make or break implementation