Welcome!

News Feed Item

Forum Commences Drilling at Northwest Athabasca JV to Follow-Up on 39.5m of Uranium Mineralization

VANCOUVER, BRITISH COLUMBIA -- (Marketwired) -- 03/24/14 -- Forum Uranium Corp. (TSX VENTURE:FDC) ("Forum" or the "Company") is pleased to announce that the 3,000 metre drill program approved by the Northwest Athabasca Joint Venture has commenced. This program will follow-up on the positive results obtained from last winter's drilling, which included Hole NWA-63, (39.5m of 0.15% U3O8 including a 0.5 m interval grading 1.8% U3O8; See press release dated June 5, 2013) drilled on the Otis West target. The mineralization discovered in 2013 at Otis West is hosted within basement rocks along a major fault (the Otis fault) parallel to the Maurice Bay fault. It has a strike length of 50m, a vertical extent of approximately 110m, and remains open to the east and at depth.

This drill program is designed to determine the eastern extent of the mineralization discovered at Otis West and its extension on to the Otis East gravity target, both of which lie on the south side of the 1.5 million pound Maurice Bay deposit(i) (See Figure 1) and extend for one kilometre within strong side by side gravity lows. In addition, planned drilling will also test basement targets identified below the unconformity style Maurice Bay deposit, Zone "A" (historic grades of up to 6m of 5.64% U3O8 at a depth of 113m to 119m drilled in 1978 by Uranerz Exploration and Mining, a predecessor company of Cameco Corporation) and an untested gravity low on the east side and on strike with the Maurice Bay deposit (MB East).

The Northwest Athabasca Property continues to be a prolific area for uranium mineralization, both unconformity-style as demonstrated by the Maurice Bay deposit, and basement-style as determined by three out of four gravity targets drilled that host uranium mineralization in the basement rocks. Five of the nine holes drilled last winter on Otis West intersected shallow uranium mineralization in highly altered basement rocks. This is typical of the class of basement-hosted deposits, such as Fission Uranium's Patterson Lake South discovery, Rio Tinto's Roughrider deposit and Cameco's Millennium deposit, albeit each with their own characteristics.

Forum is Operator of the Northwest Athabasca JV, which is the Company's second drill campaign of the current season. Drilling is continuing at Forum's 100% owned Clearwater project, located on trend and immediately adjacent to the southwest of Fission Uranium's Patterson Lake South (PLS) discovery (See press release dated February 26, 2014)

Maurice Bay Deposit(i)

The Maurice Bay deposit is a 1.5 million pound historical uranium resource estimate based on 600 tonnes grading 0.6% U3O8, as reported by Saskatchewan Industry and Resources, Miscellaneous Report 2003-7. The Maurice Bay historical resource estimate was completed prior to the implementation of National Instrument 43-101. Given the extensive exploration work completed by experienced mineral resource companies, and the quality of the historical work completed, the Company believes the historical estimate to be relevant and reliable. However, a qualified person has not completed sufficient work to verify and classify the historical estimate as a current mineral resource, and the Company is not treating the historical estimate as a current mineral resource. Hence, the estimate should not be relied upon. It should be noted that mineral resources, which are not mineral reserves, do not have demonstrated economic viability. The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in NI 43-101 and reviewed by Ken Wheatley, P. Geo. (Saskatchewan and Nunavut), Vice President, Exploration for Forum Uranium Corp., a qualified person under NI 43-101.

To view Figure 1 please click on the following link: http://media3.marketwire.com/docs/Map_of_Maurice_Bay_Deposit_Area_Figure_1.pdf.

NW Athabasca Joint Venture

The NW Athabasca project is a joint venture held 64% jointly by Forum and NexGen Energy Ltd. Forum is Operator of the joint venture with 23.5% partner Cameco Corporation and 12.5% partner AREVA Resources Canada Inc.

About Forum Uranium

Forum Uranium Corp. is a Canadian-based energy company with a focus on the acquisition, exploration and development of Canadian uranium projects. Forum has assembled a highly experienced team of exploration professionals with a track record of mine discoveries for unconformity-style uranium deposits in Canada. The Company has a strategy to discover near surface uranium deposits in the Athabasca Basin, Saskatchewan and the Thelon Basin, Nunavut by exploring on its 100% owned properties and through strategic partnerships and joint ventures.

ON BEHALF OF THE BOARD

Richard J. Mazur, P.Geo., President & CEO

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
Many private cloud projects were built to deliver self-service access to development and test resources. While those clouds delivered faster access to resources, they lacked visibility, control and security needed for production deployments. In their session at 18th Cloud Expo, Steve Anderson, Product Manager at BMC Software, and Rick Lefort, Principal Technical Marketing Consultant at BMC Software, will discuss how a cloud designed for production operations not only helps accelerate developer...
In his session at 18th Cloud Expo, Sagi Brody, Chief Technology Officer at Webair Internet Development Inc., will focus on real world deployments of DDoS mitigation strategies in every layer of the network. He will give an overview of methods to prevent these attacks and best practices on how to provide protection in complex cloud platforms. He will also outline what we have found in our experience managing and running thousands of Linux and Unix managed service platforms and what specifically c...
Much of the value of DevOps comes from a (renewed) focus on measurement, sharing, and continuous feedback loops. In increasingly complex DevOps workflows and environments, and especially in larger, regulated, or more crystallized organizations, these core concepts become even more critical. In his session at @DevOpsSummit at 18th Cloud Expo, Andi Mann, Chief Technology Advocate at Splunk, will show how, by focusing on 'metrics that matter,' you can provide objective, transparent, and meaningfu...
trust and privacy in their ecosystem. Assurance and protection of device identity, secure data encryption and authentication are the key security challenges organizations are trying to address when integrating IoT devices. This holds true for IoT applications in a wide range of industries, for example, healthcare, consumer devices, and manufacturing. In his session at @ThingsExpo, Lancen LaChance, vice president of product management, IoT solutions at GlobalSign, will teach IoT developers how t...
As enterprises around the world struggle with their digital transformation efforts, many are finding that innovative digital teams are moving much faster than their hidebound IT organizations. Rather than struggling to convince traditional IT to get with the digital program, executives are taking advice from IT research firm Gartner, and encouraging existing IT to continue in their desultory ways. However, many CIOs are realizing the dangers of following Gartner’s advice. The central challenge ...
A critical component of any IoT project is the back-end systems that capture data from remote IoT devices and structure it in a way to answer useful questions. Traditional data warehouse and analytical systems are mature technologies that can be used to handle large data sets, but they are not well suited to many IoT-scale products and the need for real-time insights. At Fuze, we have developed a backend platform as part of our mobility-oriented cloud service that uses Big Data-based approache...
The pace of innovation, vendor lock-in, production sustainability, cost-effectiveness, and managing risk… In his session at 18th Cloud Expo, Dan Choquette, Founder of RackN, will discuss how CIOs are challenged finding the balance of finding the right tools, technology and operational model that serves the business the best. He will discuss how clouds, open source software and infrastructure solutions have benefits but also drawbacks and how workload and operational portability between vendors...
Cloud Object Storage is effectively infinitely scalable and boasts the lowest total costs. But cloud SLAs and T&Cs are traditionally optimized for huge customers like Netflix, so applications demanding better confidentiality or higher availability typically can’t reap the benefits of public cloud storage. In his session at 18th Cloud Expo, Don Martin, CTO of Security First Corp, will provide an overview of innovative technologies available today – secret sharing and information dispersal algori...
We're entering the post-smartphone era, where wearable gadgets from watches and fitness bands to glasses and health aids will power the next technological revolution. With mass adoption of wearable devices comes a new data ecosystem that must be protected. Wearables open new pathways that facilitate the tracking, sharing and storing of consumers’ personal health, location and daily activity data. Consumers have some idea of the data these devices capture, but most don’t realize how revealing and...
As the rapid adoption of containers continues, companies are finding that they lack the operational tools to understand the behavior of applications deployed in these containers, and how to identify issues in their application infrastructure. For example, how are multiple containers within an application impacting each other’s performance? If an application’s service is degraded, which container is to blame? In the case of an application outage, what was the root cause of the outage?
When it comes to IoT in the enterprise, namely the commercial building and hospitality markets, a benefit not getting the attention it deserves is energy efficiency, and IoT's direct impact on a cleaner, greener environment when installed in smart buildings. Until now clean technology was offered piecemeal and led with point solutions that require significant systems integration to orchestrate and deploy. There didn't exist a 'top down' approach that can manage and monitor the way a Smart Buildi...
Cloud-based NCLC (No-code/low code) application builder platforms empower everyone in the organization to quickly build applications and executable processes that broaden access, deepen collaboration, and enhance transparency for all team members. Line of business owners (LOBO) and operations managers know best their part of the business and their processes. IT departments are beginning to leverage NCLC platforms to empower and enable LOBOs to lead the innovation, transform the organization, an...
Unless you don’t use the internet, don’t live in California, or haven’t been paying attention to the recent news… you should be aware that self-driving cars are on their way to becoming a reality. I have seen them – they are real. If you believe in the future reality of self-driving cars, then continue reading on. If you don’t believe in the future possibilities, then I am not sure what to do to convince you other than discuss the very real changes that will roll out with the consumer producti...
There is an ever-growing explosion of new devices that are connected to the Internet using “cloud” solutions. This rapid growth is creating a massive new demand for efficient access to data. And it’s not just about connecting to that data anymore. This new demand is bringing new issues and challenges and it is important for companies to scale for the coming growth. And with that scaling comes the need for greater security, gathering and data analysis, storage, connectivity and, of course, the...
The IETF draft standard for M2M certificates is a security solution specifically designed for the demanding needs of IoT/M2M applications. In his session at @ThingsExpo, Brian Romansky, VP of Strategic Technology at TrustPoint Innovation, will explain how M2M certificates can efficiently enable confidentiality, integrity, and authenticity on highly constrained devices.