Click here to close now.

Welcome!

News Feed Item

Spring Cleaning Tips: It's Easy to Keep Your Vinyl Siding Looking New

WASHINGTON, March 31, 2014 /PRNewswire/ -- (NU) -- Just as your car gets dirty, so does your home's siding. The good news is that if your home has vinyl siding, it's almost as easy to clean as your car.

Imagine, with nothing more than a hose and water, mild soap and a long-handled soft bristle brush, you can keep your home looking its best.

"When it comes to beauty, value, and ease of maintenance, nothing comes close to vinyl siding, which is why it has been the leading exterior cladding in the U.S. and Canada since 1995," said Jery Y. Huntley, president & CEO of the Vinyl Siding Institute.

Vinyl siding is the exterior cladding that demands the least amount of time and resources to maintain. And for time-starved homeowners, that's one less thing to worry about.

Compare that to your neighbors' houses:

  • Brick requires re-pointing of mortar.
  • Fiber cement siding requires periodic painting and caulking.
  • Wood siding requires frequent painting and staining.
  • Stucco requires painting and sealing.

But vinyl siding ... well, here's how easy it is to make your vinyl siding clean and the envy of the neighborhood:

First, mix your cleaning solution in a large bucket. Four gallons of water and 1/4 cup of dish soap should do the trick.

Start at the top, and work your way down to prevent streaks, hose off a section to remove any loose debris, then wet your brush in the cleaning solution and scrub the siding.

Be sure to rinse away the soapy water before it dries, or it will leave marks on the siding.

Small spots of mold and mildew can be cleaned with common cleaners such as Fantastik or Windex.

Have stains? Try a solution of 30 percent vinegar and 70 percent water.

Be sure to spot check any general or stain-specific cleaner before using it on a large section of siding. After removing the stain, rinse thoroughly with water. Do not use cleaners containing organic solvents, undiluted chlorine bleach, liquid grease remover, nail polish remover or furniture polish or cleaners. They can affect the surface of the siding.

If using a pressure washer, be sure to keep the stream at eye level and pointed straight at the siding, not at an angle. That way, you won't drive water in behind the siding, which could cause mold to develop. Also, use caution when using a pressure washer around openings like windows, doors and plumbing connections.

Take note that some manufacturers don't want pressure washers used on their products at all. Others allow them, but have limitations on the amount of pressure and the cleaners that can be used.

With just a little bit of time and effort, vinyl siding can be kept looking "like new" and will provide many years of trouble-free beauty for your home. To learn more about vinyl siding, visit www.vinylsiding.org.

 

SOURCE Vinyl Siding Institute

More Stories By PR Newswire

Copyright © 2007 PR Newswire. All rights reserved. Republication or redistribution of PRNewswire content is expressly prohibited without the prior written consent of PRNewswire. PRNewswire shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon.

Latest Stories
DevOps tends to focus on the relationship between Dev and Ops, putting an emphasis on the ops and application infrastructure. But that’s changing with microservices architectures. In her session at DevOps Summit, Lori MacVittie, Evangelist for F5 Networks, will focus on how microservices are changing the underlying architectures needed to scale, secure and deliver applications based on highly distributed (micro) services and why that means an expansion into “the network” for DevOps.
"We have a tagline - "Power in the API Economy." What that means is everything that is built in applications and connected applications is done through APIs," explained Roberto Medrano, Executive Vice President at Akana, in this SYS-CON.tv interview at 16th Cloud Expo, held June 9-11, 2015, at the Javits Center in New York City.
Containers have changed the mind of IT in DevOps. They enable developers to work with dev, test, stage and production environments identically. Containers provide the right abstraction for microservices and many cloud platforms have integrated them into deployment pipelines. DevOps and Containers together help companies to achieve their business goals faster and more effectively. In his session at DevOps Summit, Ruslan Synytsky, CEO and Co-founder of Jelastic, reviewed the current landscape of...
"AgilData is the next generation of dbShards. It just adds a whole bunch more functionality to improve the developer experience," noted Dan Lynn, CEO of AgilData, in this SYS-CON.tv interview at 16th Cloud Expo, held June 9-11, 2015, at the Javits Center in New York City.
The Internet of Things is not only adding billions of sensors and billions of terabytes to the Internet. It is also forcing a fundamental change in the way we envision Information Technology. For the first time, more data is being created by devices at the edge of the Internet rather than from centralized systems. What does this mean for today's IT professional? In this Power Panel at @ThingsExpo, moderated by Conference Chair Roger Strukhoff, panelists addressed this very serious issue of pro...
The cloud has transformed how we think about software quality. Instead of preventing failures, we must focus on automatic recovery from failure. In other words, resilience trumps traditional quality measures. Continuous delivery models further squeeze traditional notions of quality. Remember the venerable project management Iron Triangle? Among time, scope, and cost, you can only fix two or quality will suffer. Only in today's DevOps world, continuous testing, integration, and deployment upend...
"We provide a web application framework for building really sophisticated web applications that run on a browser without any installation need so we get used for biotech, defense, and banking applications," noted Charles Kendrick, CTO and Chief Architect at Isomorphic Software, in this SYS-CON.tv interview at @DevOpsSummit (http://DevOpsSummit.SYS-CON.com), held June 9-11, 2015, at the Javits Center in New York
Discussions about cloud computing are evolving into discussions about enterprise IT in general. As enterprises increasingly migrate toward their own unique clouds, new issues such as the use of containers and microservices emerge to keep things interesting. In this Power Panel at 16th Cloud Expo, moderated by Conference Chair Roger Strukhoff, panelists addressed the state of cloud computing today, and what enterprise IT professionals need to know about how the latest topics and trends affect t...
Explosive growth in connected devices. Enormous amounts of data for collection and analysis. Critical use of data for split-second decision making and actionable information. All three are factors in making the Internet of Things a reality. Yet, any one factor would have an IT organization pondering its infrastructure strategy. How should your organization enhance its IT framework to enable an Internet of Things implementation? In his session at @ThingsExpo, James Kirkland, Red Hat's Chief Arch...
In the midst of the widespread popularity and adoption of cloud computing, it seems like everything is being offered “as a Service” these days: Infrastructure? Check. Platform? You bet. Software? Absolutely. Toaster? It’s only a matter of time. With service providers positioning vastly differing offerings under a generic “cloud” umbrella, it’s all too easy to get confused about what’s actually being offered. In his session at 16th Cloud Expo, Kevin Hazard, Director of Digital Content for SoftL...
"A lot of the enterprises that have been using our systems for many years are reaching out to the cloud - the public cloud, the private cloud and hybrid," stated Reuven Harrison, CTO and Co-Founder of Tufin, in this SYS-CON.tv interview at 16th Cloud Expo, held June 9-11, 2015, at the Javits Center in New York City.
One of the hottest areas in cloud right now is DRaaS and related offerings. In his session at 16th Cloud Expo, Dale Levesque, Disaster Recovery Product Manager with Windstream's Cloud and Data Center Marketing team, will discuss the benefits of the cloud model, which far outweigh the traditional approach, and how enterprises need to ensure that their needs are properly being met.
The time is ripe for high speed resilient software defined storage solutions with unlimited scalability. ISS has been working with the leading open source projects and developed a commercial high performance solution that is able to grow forever without performance limitations. In his session at Cloud Expo, Alex Gorbachev, President of Intelligent Systems Services Inc., shared foundation principles of Ceph architecture, as well as the design to deliver this storage to traditional SAN storage co...
"Plutora provides release and testing environment capabilities to the enterprise," explained Dalibor Siroky, Director and Co-founder of Plutora, in this SYS-CON.tv interview at @DevOpsSummit, held June 9-11, 2015, at the Javits Center in New York City.
SYS-CON Events announced today that JFrog, maker of Artifactory, the popular Binary Repository Manager, will exhibit at SYS-CON's @DevOpsSummit Silicon Valley, which will take place on November 3–5, 2015, at the Santa Clara Convention Center in Santa Clara, CA. Based in California, Israel and France, founded by longtime field-experts, JFrog, creator of Artifactory and Bintray, has provided the market with the first Binary Repository solution and a software distribution social platform.