Welcome!

News Feed Item

Southeast Asia Retailers Losing Millions of Dollars Due to Box Cutters

ADCO'S New Elite Easy Cut 1500 'Does What No Other Box Cutter Can Do'

SINGAPORE -- (Marketwired) -- 03/31/14 -- Large retailers in the Southeast Asia market are losing millions of dollars in lost profits each year due to box cutters, according to documented studies conducted by ADCO Industries and Stream Peak International Pte. Ltd. These studies provide evidence that a minimum of one half of 1% of all retail merchandise is damaged by a box knife, resulting in lost profits for retailers. And until now, retailers couldn't do anything about it.

"Retailers are plagued with the same problem -- box cutters were designed strictly to cut boxes, and don't take into consideration that there is expensive product inside!" said Mike Davis, Vice President of ADCO. "The blade's over penetration through the box compensates for anomalies such as crushed, overloaded or damaged boxes, and this ensures a clean cut. But the problem is, if the stocker fails to cut above or below the content inside the box, product will be damaged."

The tools on the market available to retailers, prior to the Easy Cut line of cutters, put the responsibility to prevent damage squarely on the stocker's shoulders. The box cutter itself provided minimal value to prevent product damage.

"And that's just the way it's always been, and nobody has ever really questioned it," Davis continued. "This is a costly problem in the retail world, and we decided to do something about it."

The patented Elite Easy Cut 1500 recently released from ADCO and sold in South East Asia by Stream Peak International is the ultimate in box cutter technology that eliminates box cutter problems for retailers. Easy Cut 1500 allows any stocker, regardless of experience or whether he cuts above or below the product, to open any box without damaging the product inside.

"With the introduction of the new Elite Easy Cut 1500, the experience level and knowledge of the retail stocker is removed from the equation -- every cut is made without damage regardless of where or who is cutting," Mr. Davis said. "The Easy Cut blade actually penetrates through the cardboard box and can touch the product inside without damage!"

Among the "exclusive" features of the Elite Easy Cut 1500 that make this possible are a precise engineered blade setting and a spring blade retraction system that automatically retracts the blade when not in use, providing added protection to the user.

Easy Cut has also proven to increase productivity by as much as 20%. The cutter requires half the energy to cut boxes, while the blade lasts 60% longer than standard blades. Easy Cut's patented holster/lanyard system keeps the cutter safely in place when not in use, and has proven to reduce replacement purchases by as much as 40%.

"Elite Easy Cut 1500 stops product damage in its tracks and eliminates lacerations to stockers -- saving retailers millions of dollars each year!" Mr. Davis said. "You have to see it to believe it; Easy Cut can do what no other box cutter can do!"

* VISIT ADCOINDUSTRIES.COM OR STREAMPEAK.COM.SG TO SEE "WHAT NO OTHER BOX CUTTER CAN DO"

Add to Digg Bookmark with del.icio.us Add to Newsvine

MEDIA INQUIRIES
Cassie McQueeny-Tankard (U.S.A.)
ADCO Industries
214-217-7800
Email Contact

Jeffrey Foo (Singapore)
Stream Peak International Pte. Ltd.
68623800
Email Contact

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
In IT, we sometimes coin terms for things before we know exactly what they are and how they’ll be used. The resulting terms may capture a common set of aspirations and goals – as “cloud” did broadly for on-demand, self-service, and flexible computing. But such a term can also lump together diverse and even competing practices, technologies, and priorities to the point where important distinctions are glossed over and lost.
What happens when the different parts of a vehicle become smarter than the vehicle itself? As we move toward the era of smart everything, hundreds of entities in a vehicle that communicate with each other, the vehicle and external systems create a need for identity orchestration so that all entities work as a conglomerate. Much like an orchestra without a conductor, without the ability to secure, control, and connect the link between a vehicle’s head unit, devices, and systems and to manage the ...
All clouds are not equal. To succeed in a DevOps context, organizations should plan to develop/deploy apps across a choice of on-premise and public clouds simultaneously depending on the business needs. This is where the concept of the Lean Cloud comes in - resting on the idea that you often need to relocate your app modules over their life cycles for both innovation and operational efficiency in the cloud. In his session at @DevOpsSummit at19th Cloud Expo, Valentin (Val) Bercovici, CTO of Soli...
Complete Internet of Things (IoT) embedded device security is not just about the device but involves the entire product’s identity, data and control integrity, and services traversing the cloud. A device can no longer be looked at as an island; it is a part of a system. In fact, given the cross-domain interactions enabled by IoT it could be a part of many systems. Also, depending on where the device is deployed, for example, in the office building versus a factory floor or oil field, security ha...
Amazon has gradually rolled out parts of its IoT offerings in the last year, but these are just the tip of the iceberg. In addition to optimizing their back-end AWS offerings, Amazon is laying the ground work to be a major force in IoT – especially in the connected home and office. Amazon is extending its reach by building on its dominant Cloud IoT platform, its Dash Button strategy, recently announced Replenishment Services, the Echo/Alexa voice recognition control platform, the 6-7 strategic...
"Qosmos has launched L7Viewer, a network traffic analysis tool, so it analyzes all the traffic between the virtual machine and the data center and the virtual machine and the external world," stated Sebastien Synold, Product Line Manager at Qosmos, in this SYS-CON.tv interview at 19th Cloud Expo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
Without a clear strategy for cost control and an architecture designed with cloud services in mind, costs and operational performance can quickly get out of control. To avoid multiple architectural redesigns requires extensive thought and planning. Boundary (now part of BMC) launched a new public-facing multi-tenant high resolution monitoring service on Amazon AWS two years ago, facing challenges and learning best practices in the early days of the new service. In his session at 19th Cloud Exp...
Everyone knows that truly innovative companies learn as they go along, pushing boundaries in response to market changes and demands. What's more of a mystery is how to balance innovation on a fresh platform built from scratch with the legacy tech stack, product suite and customers that continue to serve as the business' foundation. In his General Session at 19th Cloud Expo, Michael Chambliss, Head of Engineering at ReadyTalk, discussed why and how ReadyTalk diverted from healthy revenue and mor...
As data explodes in quantity, importance and from new sources, the need for managing and protecting data residing across physical, virtual, and cloud environments grow with it. Managing data includes protecting it, indexing and classifying it for true, long-term management, compliance and E-Discovery. Commvault can ensure this with a single pane of glass solution – whether in a private cloud, a Service Provider delivered public cloud or a hybrid cloud environment – across the heterogeneous enter...
You have great SaaS business app ideas. You want to turn your idea quickly into a functional and engaging proof of concept. You need to be able to modify it to meet customers' needs, and you need to deliver a complete and secure SaaS application. How could you achieve all the above and yet avoid unforeseen IT requirements that add unnecessary cost and complexity? You also want your app to be responsive in any device at any time. In his session at 19th Cloud Expo, Mark Allen, General Manager of...
Financial Technology has become a topic of intense interest throughout the cloud developer and enterprise IT communities. Accordingly, attendees at the upcoming 20th Cloud Expo at the Javits Center in New York, June 6-8, 2017, will find fresh new content in a new track called FinTech.
"We are a leader in the market space called network visibility solutions - it enables monitoring tools and Big Data analysis to access the data and be able to see the performance," explained Shay Morag, VP of Sales and Marketing at Niagara Networks, in this SYS-CON.tv interview at 19th Cloud Expo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
@DevOpsSummit taking place June 6-8, 2017 at Javits Center, New York City, is co-located with the 20th International Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world. @DevOpsSummit at Cloud Expo New York Call for Papers is now open.
Keeping pace with advancements in software delivery processes and tooling is taxing even for the most proficient organizations. Point tools, platforms, open source and the increasing adoption of private and public cloud services requires strong engineering rigor - all in the face of developer demands to use the tools of choice. As Agile has settled in as a mainstream practice, now DevOps has emerged as the next wave to improve software delivery speed and output. To make DevOps work, organization...
The 20th International Cloud Expo has announced that its Call for Papers is open. Cloud Expo, to be held June 6-8, 2017, at the Javits Center in New York City, brings together Cloud Computing, Big Data, Internet of Things, DevOps, Containers, Microservices and WebRTC to one location. With cloud computing driving a higher percentage of enterprise IT budgets every year, it becomes increasingly important to plant your flag in this fast-expanding business opportunity. Submit your speaking proposal ...