Welcome!

News Feed Item

Industrial Adhesives: Products and Applications - A Global Market Overview

DUBLIN, April 3, 2014 /PRNewswire/ --

Research and Markets (http://www.researchandmarkets.com/research/xlg9rv/industrial) has announced the addition of the "Industrial Adhesives: Products and Applications - A Global Market Overview" report to their offering.
     (Logo: http://photos.prnewswire.com/prnh/20130307/600769 )

Demand for industrial adhesives is estimated to extend across a wide spectrum of end markets, with transportation, inclusive of automotive and construction likely to take leading positions. A growing number of end-use applications have exhibited a marked shift from traditional mechanical fastener based technologies to adhesive based technologies, prominent among them being the automotive, mobile handheld electronic devices and medical sectors, which are expected to record faster than GDP growths over the coming few years. For instance, in automotive and aircraft manufacturers have initiated the substitution of conventionally used metals with plastics, composites and nonferrous materials in fabrication that helps in reducing weight of the vehicles and reducing fuel consumption.

Traditionally, the global demand and growth for industrial adhesives has had a direct correlation with the chemical industry as a whole, which has averaged at about 3%-4% over the past decade. However, between the years 2008 and 2010, the global economy went into a tailspin, with a major proportion of industries following in its wake, of which the chemical industry was one. With end-users tightening belts and cutting down production due to lack of demand, industry majors had a torrid time in this recessionary period, and the market for industrial adhesives was also adversely affected.

Industrial Adhesives application areas explored in this report encompass Pressure Sensitive Products, Packaging, Construction, Woodworking, Transportation and Other Applications. The report also analyzes the product segments including Acrylics, Water-Based PVAc & VAE, Polyurethane, EVA & Polyethylene Hot-Melts, SBC Hot-Melts, Epoxy, Polychloroprene and Others. The major product segments further classified in to sub-types as Acrylics - Emulsion-Based Acrylics, Solvent-Based Acrylics and Other Acrylics; and Polyurethane - Solvent-Based, 100% Reactive, Hot-Melt and Water-Based.

The global markets for the above mentioned product types and end-use applications for industrial adhesives are analyzed in both value in US$ and the volumes in million pounds (lbs). The report covers the global market for industrial applications only and excludes any other usages of adhesives. Pressure sensitive products accounts for the largest share of about 28% of global consumption of industrial adhesives equated to 5.9 billion lbs closely followed by Packaging with 4.7 billion lbs in 2013. Transportation projected to achieve the fastest 6.3% compounded annual growth rate (CAGR) between 2013 and 2020.


Key Topics Covered:

PART A: GLOBAL MARKET PERSPECTIVE

1. INTRODUCTION
2. KEY GLOBAL PLAYERS
3. KEY BUSINESS TRENDS
4. GLOBAL MARKET OVERVIEW

PART B: REGIONAL MARKET PERSPECTIVE

1. NORTH AMERICA
2. EUROPE
3. ASIA-PACIFIC
4. SOUTH AMERICA
5. REST OF WORLD

PART C: GUIDE TO THE INDUSTRY
1. NORTH AMERICA
2. EUROPE
3. ASIA-PACIFIC
4. REST OF WORLD

PART D: ANNEXURE
1. RESEARCH METHODOLOGY
2. FEEDBACK


Companies Mentioned:

  • 3M Company
  • ADCO Global
  • Adhesive Applications
  • Adhesive Films
  • Adhesives Research
  • Akzo Nobel N.V.
  • Ashland
  • Avery Dennison Corporation
  • BASF SE
  • Bayer Materialscience AG
  • Beardow & Adams (Adhesives) Limited
  • Bemis Company
  • Bostik
  • Carlisle Companiesrporated
  • Chemence Limited
  • Collano Adhesives AG
  • Cytec Industries
  • Dow Corning Corporation
  • E. I. Du Pont De Nemours and Company
  • Forbo Holding Ltd
  • Franklin International
  • Gardner-Gibson
  • HB Fuller Company
  • Henkel AG & Co KGaA
  • Hernon Manufacturing
  • Hitachi Chemical
  • Huntsman International LLC
  • Illinois Tool Works
  • Klebchemie M. G. Becker GmbH & Co. KG
  • Lord Corporation
  • MAPEI SpA
  • Mitsubishi Chemical Corporation
  • PPG Industries
  • Sharp Chemical Industry
  • The Dow Chemical Company
  • The Nippon Synthetic Chemical Industry
  • The Yokohama Rubber
  • Total SA
  • Toyo Polymer



For more information visit http://www.researchandmarkets.com/research/xlg9rv/industrial


Media Contact: Laura Wood , +353-1-481-1716, [email protected]


SOURCE Research and Markets

More Stories By PR Newswire

Copyright © 2007 PR Newswire. All rights reserved. Republication or redistribution of PRNewswire content is expressly prohibited without the prior written consent of PRNewswire. PRNewswire shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon.

Latest Stories
WebRTC has had a real tough three or four years, and so have those working with it. Only a few short years ago, the development world were excited about WebRTC and proclaiming how awesome it was. You might have played with the technology a couple of years ago, only to find the extra infrastructure requirements were painful to implement and poorly documented. This probably left a bitter taste in your mouth, especially when things went wrong.
Up until last year, enterprises that were looking into cloud services usually undertook a long-term pilot with one of the large cloud providers, running test and dev workloads in the cloud. With cloud’s transition to mainstream adoption in 2015, and with enterprises migrating more and more workloads into the cloud and in between public and private environments, the single-provider approach must be revisited. In his session at 18th Cloud Expo, Yoav Mor, multi-cloud solution evangelist at Cloudy...
When you focus on a journey from up-close, you look at your own technical and cultural history and how you changed it for the benefit of the customer. This was our starting point: too many integration issues, 13 SWP days and very long cycles. It was evident that in this fast-paced industry we could no longer afford this reality. We needed something that would take us beyond reducing the development lifecycles, CI and Agile methodologies. We made a fundamental difference, even changed our culture...
The proper isolation of resources is essential for multi-tenant environments. The traditional approach to isolate resources is, however, rather heavyweight. In his session at 18th Cloud Expo, Igor Drobiazko, co-founder of elastic.io, drew upon his own experience with operating a Docker container-based infrastructure on a large scale and present a lightweight solution for resource isolation using microservices. He also discussed the implementation of microservices in data and application integrat...
All organizations that did not originate this moment have a pre-existing culture as well as legacy technology and processes that can be more or less amenable to DevOps implementation. That organizational culture is influenced by the personalities and management styles of Executive Management, the wider culture in which the organization is situated, and the personalities of key team members at all levels of the organization. This culture and entrenched interests usually throw a wrench in the work...
Containers have changed the mind of IT in DevOps. They enable developers to work with dev, test, stage and production environments identically. Containers provide the right abstraction for microservices and many cloud platforms have integrated them into deployment pipelines. DevOps and containers together help companies achieve their business goals faster and more effectively. In his session at DevOps Summit, Ruslan Synytsky, CEO and Co-founder of Jelastic, reviewed the current landscape of Dev...
In his General Session at DevOps Summit, Asaf Yigal, Co-Founder & VP of Product at Logz.io, will explore the value of Kibana 4 for log analysis and will give a real live, hands-on tutorial on how to set up Kibana 4 and get the most out of Apache log files. He will examine three use cases: IT operations, business intelligence, and security and compliance. This is a hands-on session that will require participants to bring their own laptops, and we will provide the rest.
IoT is at the core or many Digital Transformation initiatives with the goal of re-inventing a company's business model. We all agree that collecting relevant IoT data will result in massive amounts of data needing to be stored. However, with the rapid development of IoT devices and ongoing business model transformation, we are not able to predict the volume and growth of IoT data. And with the lack of IoT history, traditional methods of IT and infrastructure planning based on the past do not app...
"LinearHub provides smart video conferencing, which is the Roundee service, and we archive all the video conferences and we also provide the transcript," stated Sunghyuk Kim, CEO of LinearHub, in this SYS-CON.tv interview at @ThingsExpo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
"We're bringing out a new application monitoring system to the DevOps space. It manages large enterprise applications that are distributed throughout a node in many enterprises and we manage them as one collective," explained Kevin Barnes, President of eCube Systems, in this SYS-CON.tv interview at DevOps at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
With major technology companies and startups seriously embracing IoT strategies, now is the perfect time to attend @ThingsExpo 2016 in New York. Learn what is going on, contribute to the discussions, and ensure that your enterprise is as "IoT-Ready" as it can be! Internet of @ThingsExpo, taking place June 6-8, 2017, at the Javits Center in New York City, New York, is co-located with 20th Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry p...
@DevOpsSummit at Cloud taking place June 6-8, 2017, at Javits Center, New York City, is co-located with the 20th International Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world. The widespread success of cloud computing is driving the DevOps revolution in enterprise IT. Now as never before, development teams must communicate and collaborate in a dynamic, 24/7/365 environment. There is no time to wait for long developm...
In a recent research, analyst firm IDC found that the average cost of a critical application failure is $500,000 to $1 million per hour and the average total cost of unplanned application downtime is $1.25 billion to $2.5 billion per year for Fortune 1000 companies. In addition to the findings on the cost of the downtime, the research also highlighted best practices for development, testing, application support, infrastructure, and operations teams.
Updating DevOps to the latest production data slows down your development cycle. Probably it is due to slow, inefficient conventional storage and associated copy data management practices. In his session at @DevOpsSummit at 20th Cloud Expo, Dhiraj Sehgal, in Product and Solution at Tintri, will talk about DevOps and cloud-focused storage to update hundreds of child VMs (different flavors) with updates from a master VM in minutes, saving hours or even days in each development cycle. He will also...
"There's a growing demand from users for things to be faster. When you think about all the transactions or interactions users will have with your product and everything that is between those transactions and interactions - what drives us at Catchpoint Systems is the idea to measure that and to analyze it," explained Leo Vasiliou, Director of Web Performance Engineering at Catchpoint Systems, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York Ci...