Welcome!

News Feed Item

Caledonia Mining Corporation: Q1 2014 Production Update

TORONTO, ONTARIO -- (Marketwired) -- 04/07/14 -- Caledonia Mining Corporation (TSX: CAL)(OTCQX: CALVF)(AIM: CMCL) ("Caledonia") announces gold production from its 49 per cent owned subsidiary, the Blanket Mine ("Blanket") in Zimbabwe, for the quarter ended March 31, 2014. All production numbers are expressed on a 100 per cent basis and are based on mine production data and are therefore subject to change following final assay at the refiner.

--  10,607 ounces of gold were produced during Q1 2014 (10,472 ounces in Q1
    2013), representing a 7.2 per cent decrease on the gold produced in Q4
    2013 (11,429 ounces).

--  As advised in the 2013 results which were released on March 31, 2014
    gold production in the first quarter of 2014 was affected by the
    achieved grade being lower than the targeted grade of 3.83 g/t Au. This
    was due to a sub-horizontal fault which was encountered at the AR South
    ore body between 680 and 695 meters below surface and which had
    displaced the ore zone to the west and south. Production on these panels
    was stopped and re-development was required to establish other panels at
    the required grade. Management believes that the above measures have
    been successful and that an average head grade of between 3.60 to 3.83
    g/t Au is expected to be maintained, and closer attention will be paid
    to grade control in future. Production in February 2014 was also
    adversely affected by an unstable mains power supply and by the
    unscheduled requirement to replace the winding rope on No. 4 Shaft.

--  Targeted gold production for 2014 is maintained at 48,000 ounces

Cautionary Note Concerning Forward-Looking Information

Information and statements contained in this news release that are not historical facts are "forward-looking information" within the meaning of applicable securities legislation that involve risks and uncertainties relating, but not limited to Caledonia's current expectations, intentions, plans, and beliefs. Forward-looking information can often be identified by forward-looking words such as "anticipate", "believe", "expect", "goal", "plan", "target", "intend", "estimate", "could", "should", "may" and "will" or the negative of these terms or similar words suggesting future outcomes, or other expectations, beliefs, plans, objectives, assumptions, intentions or statements about future events or performance. Examples of forward-looking information in this news release include: production guidance, estimates of future/targeted production rates, and our plans and timing regarding further exploration and drilling and development. This forward-looking information is based, in part, on assumptions and factors that may change or prove to be incorrect, thus causing actual results, performance or achievements to be materially different from those expressed or implied by forward-looking information. Such factors and assumptions include, but are not limited to: failure to establish estimated resources and reserves, the grade and recovery of ore which is mined varying from estimates, success of future exploration and drilling programs, reliability of drilling, sampling and assay data, assumptions regarding the representativeness of mineralization being inaccurate, success of planned metallurgical test-work, capital and operating costs varying significantly from estimates, delays in obtaining or failures to obtain required governmental, environmental or other project approvals, inflation, changes in exchange rates, fluctuations in commodity prices, delays in the development of projects and other factors.

Potential shareholders and prospective investors should be aware that these statements are subject to known and unknown risks, uncertainties and other factors that could cause actual results to differ materially from those suggested by the forward-looking statements. Such factors include, but are not limited to: risks relating to estimates of mineral reserves and mineral resources proving to be inaccurate, fluctuations in gold price, risks and hazards associated with the business of mineral exploration, development and mining, risks relating to the credit worthiness or financial condition of suppliers, refiners and other parties with whom the Company does business; inadequate insurance, or inability to obtain insurance, to cover these risks and hazards, employee relations; relationships with and claims by local communities and indigenous populations; political risk; availability and increasing costs associated with mining inputs and labour; the speculative nature of mineral exploration and development, including the risks of obtaining or maintaining necessary licenses and permits, diminishing quantities or grades of mineral reserves as mining occurs; global financial condition, the actual results of current exploration activities, changes to conclusions of economic evaluations, and changes in project parameters to deal with unanticipated economic or other factors, risks of increased capital and operating costs, environmental, safety or regulatory risks, expropriation, the Company's title to properties including ownership thereof, increased competition in the mining industry for properties, equipment, qualified personnel and their costs, risks relating to the uncertainty of timing of events including targeted production rate increase and currency fluctuations. Shareholders are cautioned not to place undue reliance on forward-looking information. By its nature, forward-looking information involves numerous assumptions, inherent risks and uncertainties, both general and specific, that contribute to the possibility that the predictions, forecasts, projections and various future events will not occur. Caledonia undertakes no obligation to update publicly or otherwise revise any forward-looking information whether as a result of new information, future events or other such factors which affect this information, except as required by law.

Contacts:
Caledonia Mining Corporation
Mark Learmonth
+27 11 447 2499
[email protected]

Numis
John Prior/Jamie Loughborough/James Black
+44 20 7260 1000

Blytheweigh
Tim Blythe/Halimah Hussain/Camilla Horsfall
+44 20 7138 3204

WH Ireland
Adrian Hadden/Nick Field
+44 20 7220 1751

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
Many companies start their journey to the cloud in the DevOps environment, where software engineers want self-service access to the custom tools and frameworks they need. Machine learning technology can help IT departments keep up with these demands. In his session at 21st Cloud Expo, Ajay Gulati, Co-Founder, CTO and Board Member at ZeroStack, will discuss the use of machine learning for automating provisioning of DevOps resources, taking the burden off IT teams.
SYS-CON Events announced today that Cedexis will exhibit at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Cedexis is the leader in data-driven enterprise global traffic management. Whether optimizing traffic through datacenters, clouds, CDNs, or any combination, Cedexis solutions drive quality and cost-effectiveness.
SYS-CON Events announced today that Enroute Lab will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Enroute Lab is an industrial design, research and development company of unmanned robotic vehicle system. For more information, please visit http://elab.co.jp/.
SYS-CON Events announced today that Mobile Create USA will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Mobile Create USA Inc. is an MVNO-based business model that uses portable communication devices and cellular-based infrastructure in the development, sales, operation and mobile communications systems incorporating GPS capabi...
SYS-CON Events announced today that Suzuki Inc. will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Suzuki Inc. is a semiconductor-related business, including sales of consuming parts, parts repair, and maintenance for semiconductor manufacturing machines, etc. It is also a health care business providing experimental research for...
IBM helps FinTechs and financial services companies build and monetize cognitive-enabled financial services apps quickly and at scale. Hosted on IBM Bluemix, IBM’s platform builds in customer insights, regulatory compliance analytics and security to help reduce development time and testing. In his session at 21st Cloud Expo, Lennart Frantzell, a Developer Advocate with IBM, will discuss how these tools simplify the time-consuming tasks of selection, mapping and data integration, allowing devel...
Cloud-based disaster recovery is critical to any production environment and is a high priority for many enterprise organizations today. Nearly 40% of organizations have had to execute their BCDR plan due to a service disruption in the past two years. Zerto on IBM Cloud offer VMware and Microsoft customers simple, automated recovery of on-premise VMware and Microsoft workloads to IBM Cloud data centers.
Why Federal cloud? What is in Federal Clouds and integrations? This session will identify the process and the FedRAMP initiative. But is it sufficient? What is the remedy for keeping abreast of cutting-edge technology? In his session at 21st Cloud Expo, Rasananda Behera will examine the proposed solutions: Private or public or hybrid cloud Responsible governing bodies How can we accomplish?
Real IoT production deployments running at scale are collecting sensor data from hundreds / thousands / millions of devices. The goal is to take business-critical actions on the real-time data and find insights from stored datasets. In his session at @ThingsExpo, John Walicki, Watson IoT Developer Advocate at IBM Cloud, will provide a fast-paced developer journey that follows the IoT sensor data from generation, to edge gateway, to edge analytics, to encryption, to the IBM Bluemix cloud, to Wa...
SYS-CON Events announced today that Massive Networks, that helps your business operate seamlessly with fast, reliable, and secure internet and network solutions, has been named "Exhibitor" of SYS-CON's 21st International Cloud Expo ®, which will take place on Oct 31 - Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. As a premier telecommunications provider, Massive Networks is headquartered out of Louisville, Colorado. With years of experience under their belt, their team of...
With the rise of DevOps, containers are at the brink of becoming a pervasive technology in Enterprise IT to accelerate application delivery for the business. When it comes to adopting containers in the enterprise, security is the highest adoption barrier. Is your organization ready to address the security risks with containers for your DevOps environment? In his session at @DevOpsSummit at 21st Cloud Expo, Chris Van Tuin, Chief Technologist, NA West at Red Hat, will discuss: The top security r...
SYS-CON Events announced today that Nihon Micron will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Nihon Micron Co., Ltd. strives for technological innovation to establish high-density, high-precision processing technology for providing printed circuit board and metal mount RFID tags used for communication devices. For more inf...
SYS-CON Events announced today that mruby Forum will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. mruby is the lightweight implementation of the Ruby language. We introduce mruby and the mruby IoT framework that enhances development productivity. For more information, visit http://forum.mruby.org/.
In his session at @ThingsExpo, Greg Gorman is the Director, IoT Developer Ecosystem, Watson IoT, will provide a short tutorial on Node-RED, a Node.js-based programming tool for wiring together hardware devices, APIs and online services in new and interesting ways. It provides a browser-based editor that makes it easy to wire together flows using a wide range of nodes in the palette that can be deployed to its runtime in a single-click. There is a large library of contributed nodes that help so...
SYS-CON Events announced today that Ryobi Systems will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Ryobi Systems Co., Ltd., as an information service company, specialized in business support for local governments and medical industry. We are challenging to achive the precision farming with AI. For more information, visit http:...