Welcome!

News Feed Item

Batteries & Supercapacitors in Consumer Electronics 2013-2023: Forecasts, Opportunities, Innovation

NEW YORK, April 9, 2014 /PRNewswire/ -- Reportlinker.com announces that a new market research report is available in its catalogue:

Batteries & Supercapacitors in Consumer Electronics 2013-2023: Forecasts, Opportunities, Innovation
http://www.reportlinker.com/p01012358/Batteries--Supercapacitors-in-Consumer-Electronics-2013-2023-Forecasts-Opportunities-Innovation.html#utm_source=prnewswire&utm_medium=pr&utm_campaign=Battery

Mobile phone and Laptop sales have increased consistently by double digits in the last years, now with the presence of Smartphones and Tablet PCs this trend will boost in the following years. This new age of communications, information and portability would have not been possible without energy storage solutions to power these portable devices.

Lithium batteries are currently the dominant technology in the energy storage space; this is because of their superior energy density characteristics. The consumer electronics industry has pushed their production to the scale of billions, and consequently through economies of scale optimized its supply chain and reduced their price. However lithium battery technology capabilities are being challenged by the modern multifunctional portable devices which are increasingly requiring higher performance in terms of power density. Whilst current research and development pathways aim for the emergence of a new generation of high energy density technologies, alternative energy storage technologies, are challenging the dominance of lithium batteries. This is the case with supercapacitors, which are an emerging energy storage technology whose characteristics make them strong candidates for satisfying those specific functions where lithium batteries underperform.

On the other hand, the developments of electronics and material science is allowing for new developments in the energy storage field. Now we can build, or better said, print, thin film batteries on different surfaces allowing for new energy storage solutions which coupled with energy harvesting (collecting energy from the environment) and radio frequency technologies unlock many potential applications as traceability in consumer product supply chains and internet remote localization without the need of big devices, just to mention some examples.

This report leads you from the basic concepts to understand the technologies in the energy storage industry including the advantages and limitations of different technologies. This is followed by a comprehensive section of the supercapacitor technology explaining where they fit in the energy storage industry and their potential applications. Finally it introduces the emerging and future technologies in the energy storage space: Thin Film and Flexible Batteries. We present both for batteries and supercapacitors their current research and development paths leading to improvements. Through these sections we highlight the work of the companies involved in this industry. Expanding from previous editions we present potential cost reduction paths for lithium batteries, drivers of the consumer electronic industry, the potential role of super capacitors and innovative technologies and their niche markets. In addition this report presents IDTechEx's comprehensive study of companies in the lithium battery industry: 138 manufacturers of lithium-based rechargeable batteries, including their country, cathode and anode chemistry, electrolyte morphology case type and application priorities. We present a 10 year forecast on lithium batteries, supercapacitors, RFID and wireless sensors applications.

Energy Storage for Smart and Portable Electronic Devices is currently the biggest and fastest growing battery market. The Consumer Electronics segment is one of the fastest changing markets. Portable electronic devices are becoming increasingly multifunctional and this trend is currently requiring better performance from batteries. This report explains the drivers in this changing segment, what are these changes demanding from battery technologies and what are the research and development paths to improve battery technologies accordingly. We present a new entrant technology in the energy storage industry: supercapacitors, which compared with batteries, can deliver high power instantly and do not rely on chemical processes to store energy so they have longer useful lives. We present what is the role of this new technology as an alternative to improve battery performance and satisfy the changing demands of the consumer electronics market. Indeed supercapacitors as an emerging energy storage alternative are challenging the predominance of batteries and complementing their functions. By the other hand thin film batteries open a new category in energy solutions for specific niche markets which can potentially launch them to mass production. RFID and Wireless Sensors are two examples. Emerging battery manufacturing technologies as spray battery painting and new technologies as transparent batteries hold the promise of opening new possibilities in portable device design and energy storage applications.

This report has a global coverage and presents global forecasts and players in the sector.

In this report we provide a 10 year forecast (2013-2023) for the following segments of the energy storage for portable devices and related markets:
- Primary Batteries
- Secondary (or Rechargeable Batteries) (Lithium Batteries)
- Supercapacitors for Smart and Portable Devices
- RFID and Wireless Sensors applications

In addition this report presents IDTechEx's comprehensive study of companies in the lithium battery industry: 138 manufacturers of lithium-based rechargeable batteries, including their country, cathode and anode chemistry, electrolyte morphology case type and application priorities.

Some of the insights you will find in this report:

Following the trend of smartphones, portable devices are becoming increasingly multifunctional, in this report you will find what this trend will be demanding from the energy storage industry.
What trends are behind the primary consumer battery market contraction?
How supercapacitors will step in the consumer electronics industry? What will be the value of this market in 2023?
What are the pathways for cost reduction and increased performance for Lithium Batteries?
1. EXECUTIVE SUMMARY AND CONCLUSIONS
1.1. Objective of this report
1.2. Batteries, Supercapacitors and Alternative Energy Storage for Smart and Portable Electronic devices in context
1.3. IDTechEx forecasts
1.4. Total global battery market
1.5. Rechargeable batteries by use
1.6. Cost Drivers and Cost Structure of Lithium Ion Batteries
1.6.1. Cost Structure of Lithium Ion batteries
1.6.2. Paths for further cost reductions on Lithium-ion Batteries
1.7. 138 Lithium-based Rechargeable Battery Manufacturers - Chemistry, Strategy, Success, Potential
1.8. Power requirements of small devices

1.8.1. Power Demand and Specific Power
1.8.2. Capacity, Energy Density and Specific Power
1.9. The Consumer Electronics game is changing: a role for supercapacitors?
1.9.1. Smartphones and Tablet PCs are changing the game of consumer electronics
1.9.2. An analysis of power consumption in Smartphones
1.9.3. A role for supercapacitors in the consumer electronics market
1.10. Alternative directions
1.10.1. Transparent Smartphone
1.10.2. Spray Painted Batteries
1.10.3. Flexible Smartphone
1.10.4. New market drivers
1.11. Conclusions
1.12. Wearable Electronics Can Favour Supercapacitors but the big New Market is for Li-ion
2. INTRODUCTION
2.1. Small electrical and electronic devices
2.2. Popular chemistry and shape
2.3. What is a battery?
2.3.1. Battery definition
2.3.2. Analogy to a container of liquid
2.3.3. Construction of a battery
2.3.4. Many shapes of battery
2.3.5. Single use vs rechargeable batteries
2.3.6. Challenges with batteries in small devices

.4. What is a capacitor?
2.4.1. Capacitor definition
2.4.2. Analogy to a spring
2.4.3. Capacitor construction
2.5. Limitations of energy storage devices
2.5.1. The electronic device and its immediate support
2.5.2. Safety
2.5.3. Improvement in performance taking place
2.6. Standards
3. RECHARGEABLE BATTERIES
3.1. Technology successes and failures
3.2. Lithium ion
3.2.1. Formats of the leading forms of battery
3.2.2. Cost Drivers of Lithium Ion Batteries.
3.2.3. Materials Cost Drivers
3.2.4. Improvements in specific energy and/or energy density
3.2.5. Anode New Materials Development
3.2.6. Cathode New Materials Improvement
3.2.7. Improvements in Power
3.2.8. Improvements in safety and reliability
3.2.9. The Lithium Batteries of the Future
3.2.10. Materials and economies of scale
3.2.11. Manufacturing cost drivers
4. TRENDS IN SMART AND PORTABLE DEVICES

4.1. Evolution of Markets for Lithium Ion Batteries
4.2. Forecast for Smart and Portable Devices
4.3. Trends in Smart and Portable Electronic Devices
4.3.1. Increasing Multifunctionality: From Simon to IPhone.
4.3.2. Is the race for the thinnest mobile in the market over?
4.3.3. The iPad
4.3.4. IPhone and Nokia want a piece of Cannon and Nikkon's market- Can Supercapacitors play a role on this strategy?
4.3.5. Power Efficiency due to Multiple Core Processors in Smartphones
4.4. Supercapacitors as a solution for peak power requirements in smart and portable devices
4.4.1. An analysis of power consumption in Smartphones
4.4.2. Digital Cameras Flash - why today's digital cameras need a more powerful flash
4.4.3. Laptop Solid State Drives use Supercapacitors
5. SINGLE USE BATTERIES AND ALTERNATIVE ENERGY STORAGE
5.1. Energy Storage for Wireless Sensors and RFID
5.1.1. Customised and AAA/AA Batteries
5.1.2. Planar Energy Devices
5.1.3. Primary battery life extension
5.1.4. Always Ready Smart Nano Battery
5.1.5. Energy Storage of batteries in standard and laminar formats
5.1.6. Future options for higher energy density
5.1.7. Laminar Fuel Cells
5.1.8. Tadiran Batteries twenty year batteries
6. NEW SHAPES - LAMINAR AND FLEXIBLE BATTERIES
6.1. Laminar lithium batteries
6.2. Laminar printed manganese dioxide batteries
6.2.1. Printed battery construction

6.2.2. Printed battery production facilities
6.2.3. Applications of printed batteries
6.2.4. Printed battery specifications
6.3. Ultrathin battery from Front Edge Technology
6.4. Nanotube flexible battery
6.5. Transparent battery - NEC and Waseda University
6.6. Battery Assembly through Spray Painting
6.7. Other emerging needs for laminar batteries - apparel and medical
6.7.1. Electronic apparel
6.7.2. Wireless body area network
6.8. Biobatteries do their own harvesting
6.9. Battery that incorporates energy harvesting - FlexEl
6.10. Microbatteries built with viruses
6.11. Biomimetic energy storage system
6.12. Magnetic spin battery
7. SUPERCAPACITORS
7.1. Example of capacitor storage application - e-labels
7.2. Many shapes of capacitor
7.3. Capacitors for small devices

7.4. What does a supercapacitor for small devices look like?
7.5. Supercapacitors = Ultracapacitors
7.6. Where supercapacitors fit in
7.7. Advantages and disadvantages
7.8. How it all began
7.9. Applications
7.10. Uses in small devices.
7.11. Relevance to energy harvesting
7.11.1. Perpetuum harvester
7.11.2. Human power to recharge portable electronics
7.11.3. Use in nanoelectronics
7.12. Can supercapacitors replace capacitors?
7.13. Can supercapacitors replace batteries?
7.14. Electric vehicle demonstrations and adoption
7.15. How an EDLC supercapacitor works
7.15.1. Basic geometry
7.15.2. Properties of EDL
7.15.3. Charging
7.15.4. Discharging and cycling
7.15.5. Energy density
7.15.6. Achieving higher voltages
7.16. Improvements coming along
7.16.1. Better electrodes
7.16.2. Better electrolytes
7.16.3. Better carbon technologies
7.16.4. Carbon nanotubes and Graphene
7.16.5. Carbon aerogel

7.16.6. Solid activated carbon
7.16.7. Carbon derived carbon
7.16.8. Fast charging is achieved
7.17. Microscopic supercapacitors become possible
7.17.1. Graphene
7.18. Flexible, paper and transparent supercapacitors
7.18.1. University of Minnesota
7.18.2. University of Southern California
7.18.3. Rensselaer Polytechnic Institute USA
7.19. Woven wearable supercapacitors
7.20. National University of Singapore: a competitor for supercapacitors?
7.21. Handling surge power in electronics
7.22. Wireless systems and Burst-Mode Communications
7.23. Energy harvesting
7.23.1. Bicycles and wristwatches
7.23.2. Polyacenes or polypyrrole
7.23.3. New shapes
7.23.4. Human power to recharge portable electronics
7.24. Using a supercapacitor to manage your power
7.24.1. A glimpse at the new magic

7.25. Supercabatteries or bacitors
8. ORGANISATION PROFILES
8.1. Blue Spark Technologies USA
8.2. Cap-XX Australia
8.3. Celxpert Energy Corp. Taiwan Head Quarter
8.4. Cymbet USA
8.5. Permanent Power for Wireless Sensors - White Paper from Cymbet
8.6. DYNAPACK
8.7. Duracell USA
8.8. Enfucell Finland
8.9. Excellatron USA
8.10. Front Edge Technology USA
8.11. Frontier Carbon Corporation Japan
8.12. Harvard University USA
8.13. Hitachi Maxell
8.14. Holst Centre Netherlands
8.15. Infinite Power Solutions USA
8.16. Institute of Bioengineering and Nanotechnology Singapore
8.17. Lebônê Solutions South Africa
8.18. Lifeline Energy

8.19. LG Chem
8.20. Lilliputian Systems
8.21. Massachusetts Institute of Technology USA
8.22. Maxwell Technologies Inc., USA
8.23. Murata Japan
8.24. National Renewable Energy Laboratory USA
8.25. NEC Japan
8.26. Nippon Chemi-Con Japan
8.27. Oak Ridge National Laboratory USA
8.28. Panasonic Japan
8.29. Paper Battery Company USA
8.30. Planar Energy Devices USA
8.31. Renata Batteries
8.32. ReVolt Technologies Ltd
8.33. Sandia National Laboratory USA
8.34. SIMPLO TECHNOLOGY CO. LTD
8.35. Solicore USA
8.36. Sony Japan
8.37. Technical University of Berlin Germany
8.38. University of California Los Angeles USA

8.39. University of Michigan USA
8.40. Tadiran Batteries
8.41. University of Sheffield UK
8.42. University of Wollongong Australia
8.43. Waseda University
9. MARKETS AND FORECASTS
9.1. Market for energy storage for smart and portable electronic devices
9.1.1. IDTechEx forecasts
9.2. Total global battery market
9.3. Batteries for Active RFID and Wireless Sensors Networks
9.3.2. Batteries for gift cards
9.3.3. Batteries for car keys
9.4. Printed and thin film batteries 2013-2023
9.5. Forecast assumptions and Reality Checks
9.5.1. Rechargeable Energy Storage for Smart and Portable electronic devices.
9.5.2. Global Battery Outlook
9.5.3. Supercapacitors
10. GLOSSARY

To order this report: Batteries & Supercapacitors in Consumer Electronics 2013-2023: Forecasts, Opportunities, Innovation
http://www.reportlinker.com/p01012358/Batteries--Supercapacitors-in-Consumer-Electronics-2013-2023-Forecasts-Opportunities-Innovation.html#utm_source=prnewswire&utm_medium=pr&utm_campaign=Battery

__________________________
Contact Clare: [email protected]
US: (339)-368-6001
Intl: +1 339-368-6001

SOURCE Reportlinker

More Stories By PR Newswire

Copyright © 2007 PR Newswire. All rights reserved. Republication or redistribution of PRNewswire content is expressly prohibited without the prior written consent of PRNewswire. PRNewswire shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon.

Latest Stories
Internet of @ThingsExpo has announced today that Chris Matthieu has been named tech chair of Internet of @ThingsExpo 2016 Silicon Valley. The 6thInternet of @ThingsExpo will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
Early adopters of IoT viewed it mainly as a different term for machine-to-machine connectivity or M2M. This is understandable since a prerequisite for any IoT solution is the ability to collect and aggregate device data, which is most often presented in a dashboard. The problem is that viewing data in a dashboard requires a human to interpret the results and take manual action, which doesn’t scale to the needs of IoT.
When building large, cloud-based applications that operate at a high scale, it’s important to maintain a high availability and resilience to failures. In order to do that, you must be tolerant of failures, even in light of failures in other areas of your application. “Fly two mistakes high” is an old adage in the radio control airplane hobby. It means, fly high enough so that if you make a mistake, you can continue flying with room to still make mistakes. In his session at 18th Cloud Expo, Lee...
Continuous testing helps bridge the gap between developing quickly and maintaining high quality products. But to implement continuous testing, CTOs must take a strategic approach to building a testing infrastructure and toolset that empowers their team to move fast. Download our guide to laying the groundwork for a scalable continuous testing strategy.
Much of IT terminology is often misused and misapplied. Modernization and transformation are two such terms. They are often used interchangeably even though they mean different things and have very different connotations. Indeed, it is somewhat safe to assume that in IT any transformative effort is likely to also have a modernizing effect, and thus, we can see these as levels of improvement efforts. However, many businesses are being led to believe if they don’t transform now they risk becoming ...
"We provide DevOps solutions. We also partner with some key players in the DevOps space and we use the technology that we partner with to engineer custom solutions for different organizations," stated Himanshu Chhetri, CTO of Addteq, in this SYS-CON.tv interview at DevOps at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
SYS-CON Events announced today the Enterprise IoT Bootcamp, being held November 1-2, 2016, in conjunction with 19th Cloud Expo | @ThingsExpo at the Santa Clara Convention Center in Santa Clara, CA. Combined with real-world scenarios and use cases, the Enterprise IoT Bootcamp is not just based on presentations but with hands-on demos and detailed walkthroughs. We will introduce you to a variety of real world use cases prototyped using Arduino, Raspberry Pi, BeagleBone, Spark, and Intel Edison. Y...
What does it look like when you have access to cloud infrastructure and platform under the same roof? Let’s talk about the different layers of Technology as a Service: who cares, what runs where, and how does it all fit together. In his session at 18th Cloud Expo, Phil Jackson, Lead Technology Evangelist at SoftLayer, an IBM company, spoke about the picture being painted by IBM Cloud and how the tools being crafted can help fill the gaps in your IT infrastructure.
CenturyLink has announced that application server solutions from GENBAND are now available as part of CenturyLink’s Networx contracts. The General Services Administration (GSA)’s Networx program includes the largest telecommunications contract vehicles ever awarded by the federal government. CenturyLink recently secured an extension through spring 2020 of its offerings available to federal government agencies via GSA’s Networx Universal and Enterprise contracts. GENBAND’s EXPERiUS™ Application...
DevOps at Cloud Expo – being held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA – announces that its Call for Papers is open. Born out of proven success in agile development, cloud computing, and process automation, DevOps is a macro trend you cannot afford to miss. From showcase success stories from early adopters and web-scale businesses, DevOps is expanding to organizations of all sizes, including the world's largest enterprises – and delivering real results. Am...
Using new techniques of information modeling, indexing, and processing, new cloud-based systems can support cloud-based workloads previously not possible for high-throughput insurance, banking, and case-based applications. In his session at 18th Cloud Expo, John Newton, CTO, Founder and Chairman of Alfresco, described how to scale cloud-based content management repositories to store, manage, and retrieve billions of documents and related information with fast and linear scalability. He addres...
Aspose.Total for .NET is the most complete package of all file format APIs for .NET as offered by Aspose. It empowers developers to create, edit, render, print and convert between a wide range of popular document formats within any .NET, C#, ASP.NET and VB.NET applications. Aspose compiles all .NET APIs on a daily basis to ensure that it contains the most up to date versions of each of Aspose .NET APIs. If a new .NET API or a new version of existing APIs is released during the subscription peri...
SYS-CON Events announced today that LeaseWeb USA, a cloud Infrastructure-as-a-Service (IaaS) provider, will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. LeaseWeb is one of the world's largest hosting brands. The company helps customers define, develop and deploy IT infrastructure tailored to their exact business needs, by combining various kinds cloud solutions.
As companies gain momentum, the need to maintain high quality products can outstrip their development team’s bandwidth for QA. Building out a large QA team (whether in-house or outsourced) can slow down development and significantly increases costs. This eBook takes QA profiles from 5 companies who successfully scaled up production without building a large QA team and includes: What to consider when choosing CI/CD tools How culture and communication can make or break implementation
Adding public cloud resources to an existing application can be a daunting process. The tools that you currently use to manage the software and hardware outside the cloud aren’t always the best tools to efficiently grow into the cloud. All of the major configuration management tools have cloud orchestration plugins that can be leveraged, but there are also cloud-native tools that can dramatically improve the efficiency of managing your application lifecycle. In his session at 18th Cloud Expo, ...