|By PR Newswire||
|April 9, 2014 05:00 PM EDT||
NORTH PLAINS, Ore., April 9, 2014 /PRNewswire/ -- Jewett-Cameron Trading Company Ltd. ("Jewett-Cameron") (NASDAQ: JCTCF) today is pleased to announce that its Board of Directors has authorized the implementation of a share repurchase plan to purchase for cancellation up to 300,000 common shares through facilities of the NASDAQ Stock Market ("NASDAQ"). This amount represents approximately 10.6% of the 2,821,443 common shares outstanding. Since the 4th quarter of Fiscal 2010, the Company repurchased 1,960,511 common shares (adjusted for a 2 for 1 stock split effective May 1, 2013) under prior formal plans of repurchase.
Transactions may involve Jewett-Cameron insiders or their affiliates executed in compliance with Jewett-Cameron's Insider Trading Policy.
The share repurchase plan will be effected in accordance with Rule 10b-18 under the U.S. Securities Exchange Act of 1934, which contains restrictions on the number of shares that may be purchased on a single day, subject to certain exceptions for block purchases, based on the average daily trading volumes ("ADTV") of Jewett-Cameron's shares on NASDAQ. Purchases shall be limited to daily purchases in an amount up to 25% of the ADTV in its shares, or one "Block" purchase per week in lieu of the 25% of ADTV limitation for compliance with Rule 10b-18(b)(4). A "block" as defined under Rule 10b-18(a)(5) means a quantity of stock that, among other things, is at least 5,000 shares and has a purchase price of at least US$50,000.
This share repurchase plan may commence on April 14, 2014 and will remain in place until November 14, 2014 but may be limited or terminated at any time without prior notice.
The share repurchase program was approved by the Company's Board of Directors as part of its ongoing consideration of alternative ways to leverage the Company's strong cash position. The Board of Directors believes that a share repurchase program at this time is in the best interests of the Company and its shareholders, and will not impact the Company's ability to execute its growth plans.
About Jewett-Cameron Trading Company Ltd.
Jewett-Cameron Trading Company Ltd. was incorporated in British Columbia on July 8, 1987 as a holding company for Jewett-Cameron Lumber Corporation ("JCLC"), incorporated September 1953. Jewett-Cameron Trading Company, Ltd. acquired all the shares of JCLC through a stock-for-stock exchange on July 13, 1987, and at that time JCLC became a wholly owned subsidiary. Effective September 1, 2013, Jewett-Cameron reorganized certain of its subsidiaries. JCLC's name was changed to JC USA Inc. ("JC USA"), and a new subsidiary, Jewett-Cameron Company ("JCC"), was incorporated. JC USA has the following wholly owned subsidiaries: MSI-PRO Co. ("MSI"), incorporated April 1996, Jewett-Cameron Seed Company, ("JCSC"), incorporated October 2000, Greenwood Products, Inc. ("Greenwood"), incorporated February 2002, and Jewett-Cameron Company ("JCC"), incorporated September 2013. Jewett-Cameron Trading Company, Ltd. and its subsidiaries (the "Company") have no significant assets in Canada.
The Company, through its subsidiaries, operates out of facilities located in North Plains, Oregon. JCC's business consists of the manufacturing and distribution of specialty metal products and wholesale distribution of wood products to home centers and other retailers located primarily in the United States. Greenwood is a processor and distributor of industrial wood products used in a variety of markets and applications, including the marine and transportation markets. MSI is an importer and distributor of pneumatic air tools and industrial clamps in the United States. JCSC is a processor and distributor of agricultural seeds in the United States. JC USA provides professional and administrative services, including accounting and credit services, to its subsidiary companies.
Safe Harbor Statement
This press release contains forward-looking statements that involve substantial risks and uncertainties. All statements, other than statements of historical facts, included in this press release regarding our strategy, future operations, future financial position, future revenues, certain statements and expectations regarding the asset acquisition, projected costs, prospects, plans and objectives of management are forward-looking statements. We may not actually achieve the plans, intentions or expectations disclosed in our forward-looking statements and you should not place undue reliance on our forward-looking statements. Actual results or events could differ materially from the plans, intentions and expectations disclosed in the forward-looking statements we make. There are a number of important factors that could cause Jewett-Cameron's actual results to differ materially from those indicated by such forward-looking statements which are described in the "Risk Factors" section of our most recent periodic report and registration statement filed with the SEC. We disclaim any intention or obligation to update any forward-looking statements.
For further information, contact:
President/CEO, Jewett-Cameron Trading Company Ltd.
SOURCE Jewett-Cameron Trading Company Ltd.
For basic one-to-one voice or video calling solutions, WebRTC has proven to be a very powerful technology. Although WebRTC’s core functionality is to provide secure, real-time p2p media streaming, leveraging native platform features and server-side components brings up new communication capabilities for web and native mobile applications, allowing for advanced multi-user use cases such as video broadcasting, conferencing, and media recording.
Oct. 21, 2016 05:00 AM EDT Reads: 3,903
Without lifecycle traceability and visibility across the tool chain, stakeholders from Planning-to-Ops have limited insight and answers to who, what, when, why and how across the DevOps lifecycle. This impacts the ability to deliver high quality software at the needed velocity to drive positive business outcomes. In his general session at @DevOpsSummit at 19th Cloud Expo, Eric Robertson, General Manager at CollabNet, will discuss how customers are able to achieve a level of transparency that e...
Oct. 21, 2016 04:45 AM EDT Reads: 383
Fifty billion connected devices and still no winning protocols standards. HTTP, WebSockets, MQTT, and CoAP seem to be leading in the IoT protocol race at the moment but many more protocols are getting introduced on a regular basis. Each protocol has its pros and cons depending on the nature of the communications. Does there really need to be only one protocol to rule them all? Of course not. In his session at @ThingsExpo, Chris Matthieu, co-founder and CTO of Octoblu, walk you through how Oct...
Oct. 21, 2016 04:30 AM EDT Reads: 3,063
DevOps is speeding towards the IT world like a freight train and the hype around it is deafening. There is no reason to be afraid of this change as it is the natural reaction to the agile movement that revolutionized development just a few years ago. By definition, DevOps is the natural alignment of IT performance to business profitability. The relevance of this has yet to be quantified but it has been suggested that the route to the CEO’s chair will come from the IT leaders that successfully ma...
Oct. 21, 2016 04:30 AM EDT Reads: 16,194
Major trends and emerging technologies – from virtual reality and IoT, to Big Data and algorithms – are helping organizations innovate in the digital era. However, to create real business value, IT must think beyond the ‘what’ of digital transformation to the ‘how’ to harness emerging trends, innovation and disruption. Architecture is the key that underpins and ties all these efforts together. In the digital age, it’s important to invest in architecture, extend the enterprise footprint to the cl...
Oct. 21, 2016 04:15 AM EDT Reads: 1,700
Almost everyone sees the potential of Internet of Things but how can businesses truly unlock that potential. The key will be in the ability to discover business insight in the midst of an ocean of Big Data generated from billions of embedded devices via Systems of Discover. Businesses will also need to ensure that they can sustain that insight by leveraging the cloud for global reach, scale and elasticity.
Oct. 21, 2016 04:00 AM EDT Reads: 10,925
@DevOpsSummit has been named the ‘Top DevOps Influencer' by iTrend. iTrend processes millions of conversations, tweets, interactions, news articles, press releases, blog posts - and extract meaning form them and analyzes mobile and desktop software platforms used to communicate, various metadata (such as geo location), and automation tools. In overall placement, @DevOpsSummit ranked as the number one ‘DevOps Influencer' followed by @CloudExpo at third, and @MicroservicesE at 24th.
Oct. 21, 2016 03:30 AM EDT Reads: 3,727
A critical component of any IoT project is what to do with all the data being generated. This data needs to be captured, processed, structured, and stored in a way to facilitate different kinds of queries. Traditional data warehouse and analytical systems are mature technologies that can be used to handle certain kinds of queries, but they are not always well suited to many problems, particularly when there is a need for real-time insights.
Oct. 21, 2016 03:15 AM EDT Reads: 3,834
One of biggest questions about Big Data is “How do we harness all that information for business use quickly and effectively?” Geographic Information Systems (GIS) or spatial technology is about more than making maps, but adding critical context and meaning to data of all types, coming from all different channels – even sensors. In his session at @ThingsExpo, William (Bill) Meehan, director of utility solutions for Esri, will take a closer look at the current state of spatial technology and ar...
Oct. 21, 2016 03:15 AM EDT Reads: 1,642
Without lifecycle traceability and visibility across the tool chain, stakeholders from Planning-to-Ops have limited insight and answers to who, what, when, why and how across the DevOps lifecycle. This impacts the ability to deliver high quality software at the needed velocity to drive positive business outcomes. In his session at @DevOpsSummit 19th Cloud Expo, Eric Robertson, General Manager at CollabNet, will show how customers are able to achieve a level of transparency that enables everyon...
Oct. 21, 2016 02:30 AM EDT Reads: 1,204
Explosive growth in connected devices. Enormous amounts of data for collection and analysis. Critical use of data for split-second decision making and actionable information. All three are factors in making the Internet of Things a reality. Yet, any one factor would have an IT organization pondering its infrastructure strategy. How should your organization enhance its IT framework to enable an Internet of Things implementation? In his session at @ThingsExpo, James Kirkland, Red Hat's Chief Arch...
Oct. 21, 2016 02:00 AM EDT Reads: 5,897
SYS-CON Events announced today that Interface Masters Technologies, a leader in Network Visibility and Uptime Solutions, will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Interface Masters Technologies is a leading vendor in the network monitoring and high speed networking markets. Based in the heart of Silicon Valley, Interface Masters' expertise lies in Gigabit, 10 Gigabit and 40 Gigabit Eth...
Oct. 21, 2016 01:45 AM EDT Reads: 3,259
The IoT industry is now at a crossroads, between the fast-paced innovation of technologies and the pending mass adoption by global enterprises. The complexity of combining rapidly evolving technologies and the need to establish practices for market acceleration pose a strong challenge to global enterprises as well as IoT vendors. In his session at @ThingsExpo, Clark Smith, senior product manager for Numerex, will discuss how Numerex, as an experienced, established IoT provider, has embraced a ...
Oct. 21, 2016 01:30 AM EDT Reads: 863
As software becomes more and more complex, we, as software developers, have been splitting up our code into smaller and smaller components. This is also true for the environment in which we run our code: going from bare metal, to VMs to the modern-day Cloud Native world of containers, schedulers and microservices. While we have figured out how to run containerized applications in the cloud using schedulers, we've yet to come up with a good solution to bridge the gap between getting your conta...
Oct. 21, 2016 01:30 AM EDT Reads: 1,346
Everyone knows that truly innovative companies learn as they go along, pushing boundaries in response to market changes and demands. What's more of a mystery is how to balance innovation on a fresh platform built from scratch with the legacy tech stack, product suite and customers that continue to serve as the business' foundation. In his General Session at 19th Cloud Expo, Michael Chambliss, Head of Engineering at ReadyTalk, will discuss why and how ReadyTalk diverted from healthy revenue an...
Oct. 21, 2016 01:15 AM EDT Reads: 2,909