|By Marketwired .||
|May 1, 2014 04:47 PM EDT||
VANCOUVER, BRITISH COLUMBIA -- (Marketwired) -- 05/01/14 -- Candente Copper Corp. (TSX:DNT)(LMA:DNT)(PINKSHEETS:CCOXF) ("Candente Copper" and/or the "Company" ) is pleased to announce, subject to regulatory approval, that it has agreed to carry out a non-brokered private placement (the "Private Placement") to raise gross proceeds of approximately Cdn$1,000,000.
The placement will consist of approximately 6,666,667 units (the "Units") at a price of $0.15 for gross proceeds of approximately $1,000,000 dollars. Each Unit will consist of one common share of stock and one half share purchase warrant. Each full warrant will be exercisable for one additional share of the Company's common stock for two years at a conversion price of $0.25. Shares will be subject to a mandatory 4 month hold period.
Joanne Freeze, President and CEO of the Company, and other Insiders are to subscribe for a portion of the Private Placement which in total will be for less than 25 per cent of Candente Copper's market capitalization. For the above participation, the Company is relying upon the valuation and minority shareholder approval requirements under Multilateral Instrument 61-101 Protection of Minority Security Holders in Special Transactions for the Insider's participation in the placement.
The Company may pay finder's fees in connection with the Private Placement. Funds will be used for ongoing ESIA and Metallurgical studies and for general corporate purposes.
About Candente Copper
Candente Copper is a mineral exploration company engaged in the acquisition, exploration and development of mineral properties. The company is currently focused on its 100% owned Canariaco project, which includes the Feasibility stage Canariaco Norte deposit as well as the Canariaco Sur deposit and Quebrada Verde prospect, located within the western Cordillera of the Peruvian Andes in the Department of Lambayeque in Northern Peru.
At Canariaco Norte 7.5 billion pounds of copper have been delineated in a Measured and Indicated(i) resource of 752.4 million tonnes grading 0.49% copper equivalent(ii). An Inferred Resource of 157.7 million tonnes at 0.44% copper equivalent has also been delineated in the Canariaco Norte deposit.
A highly successful Phase I drilling program was carried out in 2013 on the Canariaco Sur deposit. Future drilling is planned for additional step-out drilling at Canariaco Sur as well as first phase drilling on the Quebrada Verde target. Drilling permits are in place for much of the drilling proposed for Canariaco Sur and Candente Copper has applied to MINEM for a modification to its current drilling permit so that additional drilling could be conducted on potential extension areas to Canariaco Sur and on the Quebrada Verde target.
In addition, Candente Copper holds several other base metal exploration projects in Peru. One of these, the Arikepay copper-gold porphyry, is being explored under a joint venture agreement with Zahena S.A.C. who is funding up to USD$5 million (M) in exploration expenditures and USD$4M in payments within 4 years.
Sean Waller, P.Eng., President and Joanne C. Freeze, P.Geo., CEO, are the Qualified Persons as defined by National Instrument 43-101 for the projects discussed above. They have reviewed and approved the contents of this release. (i)The 'Measured and Indicated Resource' listed above consists of Measured Resources of 338.1Mt at 0.48% Cu, 0.08 g/t Au, and 2.0/t Ag (0.52% Cu Eq.), plus Indicated Resources of 414.3Mt at 0.43% Cu, 0.06 g/t Au, and 1.8 g/t Ag (o.46% Cu Eq.). All resources quoted in this release are based on a 0.30% copper cut-off grade and 229 drill holes completed to March 2008. (ii)Copper equivalent grade including gold and silver, metal recoveries (copper 90%, gold 55%; silver 50%) and smelter returns (copper 96.5%: gold 93%; silver 90%) applied. Copper grade equivalent calculation: Cu Eq% =(Cu % + ((Au grade x Au price x Au recovery x Au smelter return%)+(Ag grade x Ag price x Ag recovery x Ag smelter return%))/(22.0462 x Cu price x 31.0135 g/t x Cu recovery x Cu smelter return%). The metal prices used are: copper US$2.50/lb, gold US$1,035/oz and silver US$17.25/oz.
CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS
This news release may contain forward-looking statements including but not limited to comments regarding the timing and content of upcoming work programs, geoloical interpretations, receipt of property titles, potential mineral recovery processes, etc. Forward-looking statements address future events and conditions and therefore involve inherent risks and uncertainties. Actual results may differ materially from those currently anticipated in such stategments. Candente Copper relies upon litigation protection for forward-looking statements.
CAUTIONARY NOTE TO U.S. INVESTORS
We advise U.S. investors that this news release uses terms that are not recognized by the United States Securities and Exchange Commission ("SEC"), including "mineral resources", "measured resources", "indicated resources" and "inferred resources". The estimation of measured and indicated resources involves greater uncertainty as to their existence and economic feasibility than the estimation of proven and probable reserves. U.S. investors are cautioned not to assume that mineral resources in these categories will be converted to reserves. The estimation of inferred resources involves far greater uncertainty as to their existence and economic viability than the estimation of other categories of resources. U.S. investors are cautioned not to assume that estimates of inferred mineral resources exist, are economically mineable, or will be upgraded into measured or indicated mineral resources. U.S. investors are cautioned not to assume that mineral resources in any of these categories will be converted into reserves.
On behalf of the Board of Candente Copper Corp.
"Joanne C. Freeze" P.Geo., CEO, Director
Candente Copper Corp.
Manager, Investor Relations
mobile: +1 (604) 306-8477 or local: + 1 (604) 689-1957 ext 3
Candente Copper Corp.
Investor Relations, Peru
(511) 715-2001 ext 107
Candente Copper Corp.
With all the incredible momentum behind the Internet of Things (IoT) industry, it is easy to forget that not a single CEO wakes up and wonders if “my IoT is broken.” What they wonder is if they are making the right decisions to do all they can to increase revenue, decrease costs, and improve customer experience – effectively the same challenges they have always had in growing their business. The exciting thing about the IoT industry is now these decisions can be better, faster, and smarter. Now ...
Dec. 1, 2015 12:00 PM EST Reads: 305
In recent years, at least 40% of companies using cloud applications have experienced data loss. One of the best prevention against cloud data loss is backing up your cloud data. In his General Session at 17th Cloud Expo, Sam McIntyre, Partner Enablement Specialist at eFolder, presented how organizations can use eFolder Cloudfinder to automate backups of cloud application data. He also demonstrated how easy it is to search and restore cloud application data using Cloudfinder.
Dec. 1, 2015 12:00 PM EST Reads: 227
Two weeks ago (November 3-5), I attended the Cloud Expo Silicon Valley as a speaker, where I presented on the security and privacy due diligence requirements for cloud solutions. Cloud security is a topical issue for every CIO, CISO, and technology buyer. Decision-makers are always looking for insights on how to mitigate the security risks of implementing and using cloud solutions. Based on the presentation topics covered at the conference, as well as the general discussions heard between sessi...
Dec. 1, 2015 11:45 AM EST Reads: 371
The Internet of Everything is re-shaping technology trends–moving away from “request/response” architecture to an “always-on” Streaming Web where data is in constant motion and secure, reliable communication is an absolute necessity. As more and more THINGS go online, the challenges that developers will need to address will only increase exponentially. In his session at @ThingsExpo, Todd Greene, Founder & CEO of PubNub, exploreed the current state of IoT connectivity and review key trends and t...
Dec. 1, 2015 11:45 AM EST Reads: 472
Actifio is powering new application development and testing services from Net3 Technologies (N3T), a managed cloud services provider. N3T's new Symmetry DevOps™ service builds on its existing Palmetto Virtual Data Center (PvDC) Cloud services for data backup and disaster recovery (DR) based on the Actifio Copy Data Virtualization platform. Previously, N3T's data protection and DR services were challenged by overlapping and inefficient legacy hardware and software platforms from multiple vendo...
Dec. 1, 2015 11:30 AM EST
Most of the IoT Gateway scenarios involve collecting data from machines/processing and pushing data upstream to cloud for further analytics. The gateway hardware varies from Raspberry Pi to Industrial PCs. The document states the process of allowing deploying polyglot data pipelining software with the clear notion of supporting immutability. In his session at @ThingsExpo, Shashank Jain, a development architect for SAP Labs, discussed the objective, which is to automate the IoT deployment proces...
Dec. 1, 2015 11:00 AM EST Reads: 138
The cloud. Like a comic book superhero, there seems to be no problem it can’t fix or cost it can’t slash. Yet making the transition is not always easy and production environments are still largely on premise. Taking some practical and sensible steps to reduce risk can also help provide a basis for a successful cloud transition. A plethora of surveys from the likes of IDG and Gartner show that more than 70 percent of enterprises have deployed at least one or more cloud application or workload. Y...
Dec. 1, 2015 11:00 AM EST Reads: 513
Countless business models have spawned from the IaaS industry – resell Web hosting, blogs, public cloud, and on and on. With the overwhelming amount of tools available to us, it's sometimes easy to overlook that many of them are just new skins of resources we've had for a long time. In his general session at 17th Cloud Expo, Harold Hannon, Sr. Software Architect at SoftLayer, an IBM Company, broke down what we have to work with, discussed the benefits and pitfalls and how we can best use them ...
Dec. 1, 2015 10:45 AM EST Reads: 129
In demand-intensive mobile and web applications, an emerging pattern is to host the Systems of Engagement in the cloud (for maximum responsiveness) but keep the Systems of Record with the other important business systems in the company datacenter, often on a tightly secured mainframe. But what about the space in between? In this IBM Redpaper publication, we show that the IBM Bluemix cloud platform offers technologies that make it easy for cloud-based SoEs to securely connect to on-premises IBM...
Dec. 1, 2015 10:19 AM EST
Discussions of cloud computing have evolved in recent years from a focus on specific types of cloud, to a world of hybrid cloud, and to a world dominated by the APIs that make today's multi-cloud environments and hybrid clouds possible. In this Power Panel at 17th Cloud Expo, moderated by Conference Chair Roger Strukhoff, panelists addressed the importance of customers being able to use the specific technologies they need, through environments and ecosystems that expose their APIs to make true ...
Dec. 1, 2015 10:00 AM EST Reads: 577
Microservices are a very exciting architectural approach that many organizations are looking to as a way to accelerate innovation. Microservices promise to allow teams to move away from monolithic "ball of mud" systems, but the reality is that, in the vast majority of organizations, different projects and technologies will continue to be developed at different speeds. How to handle the dependencies between these disparate systems with different iteration cycles? Consider the "canoncial problem"...
Dec. 1, 2015 09:00 AM EST Reads: 481
Too often with compelling new technologies market participants become overly enamored with that attractiveness of the technology and neglect underlying business drivers. This tendency, what some call the “newest shiny object syndrome” is understandable given that virtually all of us are heavily engaged in technology. But it is also mistaken. Without concrete business cases driving its deployment, IoT, like many other technologies before it, will fade into obscurity.
Dec. 1, 2015 08:00 AM EST Reads: 396
Container technology is shaping the future of DevOps and it’s also changing the way organizations think about application development. With the rise of mobile applications in the enterprise, businesses are abandoning year-long development cycles and embracing technologies that enable rapid development and continuous deployment of apps. In his session at DevOps Summit, Kurt Collins, Developer Evangelist at Built.io, examined how Docker has evolved into a highly effective tool for application del...
Dec. 1, 2015 08:00 AM EST Reads: 397
We all know that data growth is exploding and storage budgets are shrinking. Instead of showing you charts on about how much data there is, in his General Session at 17th Cloud Expo, Scott Cleland, Senior Director of Product Marketing at HGST, showed how to capture all of your data in one place. After you have your data under control, you can then analyze it in one place, saving time and resources.
Dec. 1, 2015 08:00 AM EST Reads: 251
The Internet of Things is clearly many things: data collection and analytics, wearables, Smart Grids and Smart Cities, the Industrial Internet, and more. Cool platforms like Arduino, Raspberry Pi, Intel's Galileo and Edison, and a diverse world of sensors are making the IoT a great toy box for developers in all these areas. In this Power Panel at @ThingsExpo, moderated by Conference Chair Roger Strukhoff, panelists discussed what things are the most important, which will have the most profound...
Dec. 1, 2015 06:30 AM EST Reads: 515