|By Business Wire||
|May 5, 2014 06:30 AM EDT||
Integrated Device Technology, Inc. (IDT®) (NASDAQ:IDTI), the Analog and Digital Company™ delivering essential mixed-signal semiconductor solutions, today announced the industry’s first Ethernet and IEEE 1588 timing devices optimized to meet the performance, functionality, and cost targets of smart grid and industrial automation applications. The new low-jitter timing products improve the accuracy and reliability of IEEE 1588 time transport and offer important flexibility with an integrated Ethernet digital PLL (DPLL) and digitally-controlled oscillator (DCO) in a single chip.
The 8V89316 and 8V89317 are low-jitter Ethernet PLLs used to frequency synchronize switches and routers via the Ethernet physical layer to improve the reliability and time accuracy of IEEE 1588-based transparent clocks, boundary clocks, and ordinary clocks. The 8V89316 generates clocks suitable for QSGMII (Quad Serial Gigabit Media Independent Interface) and 1 GbE interfaces, while the ultra-low-jitter 8V89317 is suitable for 10 GbE interfaces and adds the ability to lock to 1 PPS (pulse per second) GPS clocks. Both devices include DCOs for increased flexibility, allowing them to lock to an incoming Ethernet clock or synthesize their own IEEE 1588-based clocks that other devices in the system can use as a frequency reference.
“IDT’s latest Ethernet PLLs lead the market with the combination of performance, features, and cost-effectiveness – facilitating the use of Ethernet physical layer clocks in smart-grid and industrial applications,” said Louise Gaulin, vice president and general manager of the Network Communications Division at IDT. “In addition to best-in-class jitter performance, our combined DPLL and DCO capability offers flexibility to connect an existing electrical timing input, or where that’s not feasible, to generate a new one based on IEEE 1588. Major equipment manufacturers are now requiring these levels of performance and functionality because they have been identified as critical factors in time-sensitive applications such as power substation automation.”
The 8V89317 can lock to a 1PPS frequency reference from a GPS receiver, allowing use as part of a local network master clock without the need for wire- or fiber-based access to a synchronization source. GPS timing improves flexibility of the physical location of a clock and reduces installation costs for ‘timing islands’ by eliminating the need to extend a timing network to every location.
The 8V89316 achieves phase jitter below 650 femtoseconds RMS over the 10 kHz to 20 MHz integration range, making it appropriate for 1G Ethernet PHYs and QSGMII (Quad Serial Gigabit Media Independent Interface). The 8V89317 phase jitter is below 300 femtoseconds RMS over the 10 kHz to 20 MHz integration range, capable of meeting the most stringent 10G or 40G Ethernet PHY jitter performance requirements.
Pricing and Availability
The IDT 8V89316 and 8V89317 are currently sampling to qualified customers and are encapsulated in a 196-ball 15 x 15 mm CABGA package. The IDT 8V89316 and 8V89317 are priced at $9.46 and $18.30 each for volumes of 1,000 units, respectively. For more information about IDT’s rich WAN PLL timing portfolio, www.idt.com/go/NetSync.
With a product portfolio 10 times greater and broader than any other, IDT is the world’s leader in silicon timing and is in a unique position to address the needs of virtually any application. With the industry’s largest market share, IDT is the only one-stop-shop for timing, offering products from full-featured system solutions to simple clock building-block devices. Factory-programmable options and clock solution customization capabilities address unique customer requirements, while the lowest jitter and lowest power features set IDT apart from the competition. Products are accompanied by a world-class support team driven by service and responsiveness goals. IDT has also expanded its portfolio to include frequency control products, such as the XpressO® oscillators from Fox Electronics® and an innovative line of MEMS oscillators that are rapidly replacing legacy quartz-based oscillators. For more information about IDT’s leading portfolio of timing products, please visit www.idt.com/go/timing.
Integrated Device Technology, Inc., the Analog and Digital Company™, develops system-level solutions that optimize its customers’ applications. IDT uses its market leadership in timing, serial switching and interfaces, and adds analog and system expertise to provide complete application-optimized, mixed-signal solutions for the communications, computing and consumer segments. Headquartered in San Jose, Calif., IDT has design, manufacturing, sales facilities and distribution partners throughout the world. IDT stock is traded on the NASDAQ Global Select Stock Market® under the symbol “IDTI.” Additional information about IDT is accessible at www.IDT.com. Follow IDT on Facebook, LinkedIn, Twitter, and YouTube.
IDT and the IDT logo are trademarks or registered trademarks of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners.
Smart Cities are here to stay, but for their promise to be delivered, the data they produce must not be put in new siloes. In his session at @ThingsExpo, Mathias Herberts, Co-founder and CTO of Cityzen Data, will deep dive into best practices that will ensure a successful smart city journey.
Aug. 28, 2016 06:30 PM EDT Reads: 1,593
SYS-CON Events announced today that 910Telecom will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Housed in the classic Denver Gas & Electric Building, 910 15th St., 910Telecom is a carrier-neutral telecom hotel located in the heart of Denver. Adjacent to CenturyLink, AT&T, and Denver Main, 910Telecom offers connectivity to all major carriers, Internet service providers, Internet backbones and ...
Aug. 28, 2016 06:00 PM EDT Reads: 1,908
SYS-CON Events announced today that eCube Systems, a leading provider of middleware modernization, integration, and management solutions, will exhibit at @DevOpsSummit at 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. eCube Systems offers a family of middleware evolution products and services that maximize return on technology investment by leveraging existing technical equity to meet evolving business needs. ...
Aug. 28, 2016 05:30 PM EDT Reads: 703
DevOps at Cloud Expo – being held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA – announces that its Call for Papers is open. Born out of proven success in agile development, cloud computing, and process automation, DevOps is a macro trend you cannot afford to miss. From showcase success stories from early adopters and web-scale businesses, DevOps is expanding to organizations of all sizes, including the world's largest enterprises – and delivering real results. Am...
Aug. 28, 2016 03:15 PM EDT Reads: 3,481
Pulzze Systems was happy to participate in such a premier event and thankful to be receiving the winning investment and global network support from G-Startup Worldwide. It is an exciting time for Pulzze to showcase the effectiveness of innovative technologies and enable them to make the world smarter and better. The reputable contest is held to identify promising startups around the globe that are assured to change the world through their innovative products and disruptive technologies. There w...
Aug. 28, 2016 03:00 PM EDT Reads: 731
Internet of @ThingsExpo, taking place November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA, is co-located with 19th Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world. The Internet of Things (IoT) is the most profound change in personal and enterprise IT since the creation of the Worldwide Web more than 20 years ago. All major researchers estimate there will be tens of billions devices - comp...
Aug. 28, 2016 01:45 PM EDT Reads: 3,646
DevOps at Cloud Expo, taking place Nov 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA, is co-located with 19th Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world. The widespread success of cloud computing is driving the DevOps revolution in enterprise IT. Now as never before, development teams must communicate and collaborate in a dynamic, 24/7/365 environment. There is no time to wait for long dev...
Aug. 28, 2016 01:00 PM EDT Reads: 2,412
SYS-CON Events announced today that StarNet Communications will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. StarNet Communications’ FastX is the industry first cloud-based remote X Windows emulator. Using standard Web browsers (FireFox, Chrome, Safari, etc.) users from around the world gain highly secure access to applications and data hosted on Linux-based servers in a central data center. ...
Aug. 28, 2016 12:15 PM EDT Reads: 838
Traditional on-premises data centers have long been the domain of modern data platforms like Apache Hadoop, meaning companies who build their business on public cloud were challenged to run Big Data processing and analytics at scale. But recent advancements in Hadoop performance, security, and most importantly cloud-native integrations, are giving organizations the ability to truly gain value from all their data. In his session at 19th Cloud Expo, David Tishgart, Director of Product Marketing ...
Aug. 28, 2016 11:45 AM EDT Reads: 674
Data is the fuel that drives the machine learning algorithmic engines and ultimately provides the business value. In his session at Cloud Expo, Ed Featherston, a director and senior enterprise architect at Collaborative Consulting, will discuss the key considerations around quality, volume, timeliness, and pedigree that must be dealt with in order to properly fuel that engine.
Aug. 28, 2016 11:30 AM EDT Reads: 1,950
There is growing need for data-driven applications and the need for digital platforms to build these apps. In his session at 19th Cloud Expo, Muddu Sudhakar, VP and GM of Security & IoT at Splunk, will cover different PaaS solutions and Big Data platforms that are available to build applications. In addition, AI and machine learning are creating new requirements that developers need in the building of next-gen apps. The next-generation digital platforms have some of the past platform needs a...
Aug. 28, 2016 11:00 AM EDT Reads: 688
19th Cloud Expo, taking place November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA, will feature technical sessions from a rock star conference faculty and the leading industry players in the world. Cloud computing is now being embraced by a majority of enterprises of all sizes. Yesterday's debate about public vs. private has transformed into the reality of hybrid cloud: a recent survey shows that 74% of enterprises have a hybrid cloud strategy. Meanwhile, 94% of enterpri...
Aug. 28, 2016 11:00 AM EDT Reads: 3,119
SYS-CON Events announced today Telecom Reseller has been named “Media Sponsor” of SYS-CON's 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Telecom Reseller reports on Unified Communications, UCaaS, BPaaS for enterprise and SMBs. They report extensively on both customer premises based solutions such as IP-PBX as well as cloud based and hosted platforms.
Aug. 28, 2016 10:45 AM EDT Reads: 848
The 19th International Cloud Expo has announced that its Call for Papers is open. Cloud Expo, to be held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA, brings together Cloud Computing, Big Data, Internet of Things, DevOps, Digital Transformation, Microservices and WebRTC to one location. With cloud computing driving a higher percentage of enterprise IT budgets every year, it becomes increasingly important to plant your flag in this fast-expanding business opportuni...
Aug. 28, 2016 10:30 AM EDT Reads: 4,021
As the world moves toward more DevOps and Microservices, application deployment to the cloud ought to become a lot simpler. The Microservices architecture, which is the basis of many new age distributed systems such as OpenStack, NetFlix and so on, is at the heart of Cloud Foundry - a complete developer-oriented Platform as a Service (PaaS) that is IaaS agnostic and supports vCloud, OpenStack and AWS. Serverless computing is revolutionizing computing. In his session at 19th Cloud Expo, Raghav...
Aug. 28, 2016 10:30 AM EDT Reads: 884