|By Marketwired .||
|May 8, 2014 09:45 AM EDT||
VANCOUVER, BRITISH COLUMBIA -- (Marketwired) -- 05/08/14 -- Canada Carbon Inc. (the "Company") (TSX VENTURE:CCB) is pleased to announce that following the completion of the 494 page (including appendices) technical report on its Miller Mine graphite property it has completed compilation of available technical data on the property to determine a list of 11 priority targets and 82 secondary targets of significance that will be worked on during the coming exploration program.
The selection of targets on both blocks of claim was based on many criteria including: structural interpretation based on magnetic tilt-angle derivative, dB/dt Calculated Time Constant (Tau) and dB/dt Z Component channel 26 (Time Gate 0.505 ms) from the VTEM survey, PhiSpy anomalies, initial geophysical work performed in May 2013 and geological maps.
Structural interpretation from the magnetic maps from The VTEM survey generated many linear features that could correspond to lithological contact or faulting. Both features are highly favorable contexts for intrusion of pegmatite or for the passage of hydrothermal fluids and gases toward surface. Conductive anomalies found in the area of those structural features can correspond to accumulation zones of conductor minerals such as graphite or sulphides and fit well with the model developed by Canada Carbon for its Miller Mine mineralization. Comparison with topography was also made to determine possible areas where silicification processes occurred as silicified rocks can be more resistant to erosion. Also, since some of the targets cross the access roads through the property, a significant amount of information can be obtained by simple prospecting along those roads.
Prospecting and beep mat surveying will be carried out on all of the priority and secondary targets in Phase 1 of the work program. Phase 2 will cover all priority targets with ground IP surveying to better define conductor locations. Local ground EM surveys covering IP anomalies and including any Phase 1 discoveries will detect any near surface mineralization that will be further assessed by trenching during Phase 3. Deeper targets and extensions of surface showings will be sampled by drilling during Phase 4.
Executive Chairman and CEO Mr. R. Bruce Duncan stated, "The definition of priority targets using all of the available technical data on both blocks of the property will allow the Company to immediately focus on the most prospective zones within the 25 km2 covered by VTEM aerial geophysics and to spend exploration money where the potential for discovery is highest. The verification of the various anomalies will generate much more information that can be applied to define additional exploration targets not only within the VTEM surveyed blocks, but also thereafter on other parts of the significantly expanded land package assembled by Canada Carbon in recent months."
Dr. Charbonneau, Ph.D., P. Geo #290 (an Associate of Inlandsis Consultants s.e.n.c.) is an Independent Qualified Person under National Instrument 43-101, and has reviewed and approved the technical information provided in this news release.
CANADA CARBON INC.
R. Bruce Duncan, CEO and Director
"Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release."
FORWARD LOOKING STATEMENTS: This news release contains forward-looking statements, which relate to future events or future performance and reflect management's current expectations and assumptions. Such forward-looking statements reflect management's current beliefs and are based on assumptions made by and information currently available to the Company. Investors are cautioned that these forward looking statements are neither promises nor guarantees, and are subject to risks and uncertainties that may cause future results to differ materially from those expected. These forward-looking statements are made as of the date hereof and, except as required under applicable securities legislation, the Company does not assume any obligation to update or revise them to reflect new events or circumstances. All of the forward-looking statements made in this press release are qualified by these cautionary statements and by those made in our filings with SEDAR in Canada (available at www.sedar.com).
Canada Carbon Inc.
R. Bruce Duncan
CEO and Director
(604) 638-0973 (FAX)
@ThingsExpo has been named the ‘Top WebRTC Influencer' by iTrend. iTrend processes millions of conversations, tweets, interactions, news articles, press releases, blog posts - and extract meaning form them and analyzes mobile and desktop software platforms used to communicate, various metadata (such as geo location), and automation tools. In overall placement, @ThingsExpo ranked as the number one ‘WebRTC Influencer' followed by @DevOpsSummit at 55th.
Jan. 19, 2017 06:00 AM EST Reads: 4,750
In 2014, Amazon announced a new form of compute called Lambda. We didn't know it at the time, but this represented a fundamental shift in what we expect from cloud computing. Now, all of the major cloud computing vendors want to take part in this disruptive technology. In his session at 20th Cloud Expo, John Jelinek IV, a web developer at Linux Academy, will discuss why major players like AWS, Microsoft Azure, IBM Bluemix, and Google Cloud Platform are all trying to sidestep VMs and containers...
Jan. 19, 2017 06:00 AM EST Reads: 791
SYS-CON Events announced today that Enzu will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY, and the 21st International Cloud Expo®, which will take place October 31-November 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Enzu’s mission is to be the leading provider of enterprise cloud solutions worldwide. Enzu enables online businesses to use its IT infrastructure to their competitive ad...
Jan. 19, 2017 06:00 AM EST Reads: 1,583
Providing the needed data for application development and testing is a huge headache for most organizations. The problems are often the same across companies - speed, quality, cost, and control. Provisioning data can take days or weeks, every time a refresh is required. Using dummy data leads to quality problems. Creating physical copies of large data sets and sending them to distributed teams of developers eats up expensive storage and bandwidth resources. And, all of these copies proliferating...
Jan. 19, 2017 05:45 AM EST Reads: 3,687
SYS-CON Events announced today that MobiDev, a client-oriented software development company, will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place June 6-8, 2017, at the Javits Center in New York City, NY, and the 21st International Cloud Expo®, which will take place October 31-November 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. MobiDev is a software company that develops and delivers turn-key mobile apps, websites, web services, and complex softw...
Jan. 19, 2017 05:30 AM EST Reads: 1,889
The speed of software changes in growing and large scale rapid-paced DevOps environments presents a challenge for continuous testing. Many organizations struggle to get this right. Practices that work for small scale continuous testing may not be sufficient as the requirements grow. In his session at DevOps Summit, Marc Hornbeek, Sr. Solutions Architect of DevOps continuous test solutions at Spirent Communications, explained the best practices of continuous testing at high scale, which is rele...
Jan. 19, 2017 05:30 AM EST Reads: 4,164
DevOps tends to focus on the relationship between Dev and Ops, putting an emphasis on the ops and application infrastructure. But that’s changing with microservices architectures. In her session at DevOps Summit, Lori MacVittie, Evangelist for F5 Networks, will focus on how microservices are changing the underlying architectures needed to scale, secure and deliver applications based on highly distributed (micro) services and why that means an expansion into “the network” for DevOps.
Jan. 19, 2017 05:15 AM EST Reads: 5,030
In his session at 19th Cloud Expo, Claude Remillard, Principal Program Manager in Developer Division at Microsoft, contrasted how his team used config as code and immutable patterns for continuous delivery of microservices and apps to the cloud. He showed how the immutable patterns helps developers do away with most of the complexity of config as code-enabling scenarios such as rollback, zero downtime upgrades with far greater simplicity. He also demoed building immutable pipelines in the cloud ...
Jan. 19, 2017 04:15 AM EST Reads: 3,448
Using new techniques of information modeling, indexing, and processing, new cloud-based systems can support cloud-based workloads previously not possible for high-throughput insurance, banking, and case-based applications. In his session at 18th Cloud Expo, John Newton, CTO, Founder and Chairman of Alfresco, described how to scale cloud-based content management repositories to store, manage, and retrieve billions of documents and related information with fast and linear scalability. He addres...
Jan. 19, 2017 04:00 AM EST Reads: 5,357
Hardware virtualization and cloud computing allowed us to increase resource utilization and increase our flexibility to respond to business demand. Docker Containers are the next quantum leap - Are they?! Databases always represented an additional set of challenges unique to running workloads requiring a maximum of I/O, network, CPU resources combined with data locality.
Jan. 19, 2017 03:30 AM EST Reads: 401
Due of the rise of Hadoop, many enterprises are now deploying their first small clusters of 10 to 20 servers. At this small scale, the complexity of operating the cluster looks and feels like general data center servers. It is not until the clusters scale, as they inevitably do, when the pain caused by the exponential complexity becomes apparent. We've seen this problem occur time and time again. In his session at Big Data Expo, Greg Bruno, Vice President of Engineering and co-founder of StackIQ...
Jan. 19, 2017 01:15 AM EST Reads: 7,808
The cloud market growth today is largely in public clouds. While there is a lot of spend in IT departments in virtualization, these aren’t yet translating into a true “cloud” experience within the enterprise. What is stopping the growth of the “private cloud” market? In his general session at 18th Cloud Expo, Nara Rajagopalan, CEO of Accelerite, explored the challenges in deploying, managing, and getting adoption for a private cloud within an enterprise. What are the key differences between wh...
Jan. 19, 2017 01:15 AM EST Reads: 6,101
Security, data privacy, reliability, and regulatory compliance are critical factors when evaluating whether to move business applications from in-house, client-hosted environments to a cloud platform. Quality assurance plays a vital role in ensuring that the appropriate level of risk assessment, verification, and validation takes place to ensure business continuity during the migration to a new cloud platform.
Jan. 19, 2017 01:00 AM EST Reads: 1,282
"Tintri was started in 2008 with the express purpose of building a storage appliance that is ideal for virtualized environments. We support a lot of different hypervisor platforms from VMware to OpenStack to Hyper-V," explained Dan Florea, Director of Product Management at Tintri, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Jan. 19, 2017 12:45 AM EST Reads: 4,702
Containers have changed the mind of IT in DevOps. They enable developers to work with dev, test, stage and production environments identically. Containers provide the right abstraction for microservices and many cloud platforms have integrated them into deployment pipelines. DevOps and containers together help companies achieve their business goals faster and more effectively. In his session at DevOps Summit, Ruslan Synytsky, CEO and Co-founder of Jelastic, reviewed the current landscape of Dev...
Jan. 19, 2017 12:00 AM EST Reads: 4,178