|By Marketwired .||
|May 14, 2014 09:04 AM EDT||
BURNABY, BRITISH COLUMBIA -- (Marketwired) -- 05/14/14 -- LED Imaging, a new division of LED Dental Ltd. ("LED Dental"), a wholly owned U.S. operating subsidiary of LED Medical Diagnostics Inc. ("LED Medical" or "the Company") (TSX VENTURE: LMD)(OTCQX: LEDIF)(FRANKFURT: LME), today introduced its new digital radiography intraoral sensor, the LED IS100. The sensor will be available for demo and sale at the California Dental Association - South ("CDA - South") Meeting being held Thursday, May 15, through Saturday, May 17, at the Anaheim Convention Center in Anaheim, California. The LED IS100 intraoral sensor is the third product to be added to LED Imaging's portfolio since the launch of the division on April 2, 2014.
Designed with simplicity and versatility in mind, the LED IS100 intraoral sensor is a replacement for traditional dental film as it captures intraoral images of the teeth and supporting bone structures. The sensor boasts a number of product features that support practice needs, including:
-- High-definition image resolution: With greater than 20 line pairs per millimeter spatial resolution, the LED IS100 provides practitioners with the high-quality images they need to make accurate diagnoses. With 16,384 shades of gray (14 bits), the images are crisp, clear, bright and contrasted. -- Direct USB plug-in: The LED IS100 plugs directly into any computer via a direct USB connection, eliminating the need for an inline controller, dock or hub. The sensor can easily be moved from one operatory to the next, which is ideal for multi-chair practices. -- Durable construction: Hermetically sealed casing ensures the intraoral sensor is waterproof and can easily withstand the process of disinfecting by submersion. Additionally, the LED IS100 includes a CMOS chip, fiber optics, scintillator and a shock absorption system. -- Ergonomic design: LED Imaging's intraoral sensor is designed with both practitioners and patients in mind; the slim casing and rounded edges allow for faster, easier and more comfortable patient positioning. -- Diagnostic flexibility: The LED IS100 is available in two sizes to suit diagnostic needs, such as retroalveolar, posterior, bitewing and other necessary images. It can be used in endodontics, periodontics, prosthetic surgery and implants, as well as for cavity diagnosis. Plus, the sensor features an automatic wake-up system, so there are fewer steps required for the sensor to capture an image. -- Open-architecture workflow: The LED IS100 features an open-architecture design for streamlined integration with third-party software and imaging solutions. The intraoral sensor can be implemented into a practice seamlessly, further streamlining workflow.
"We're really excited about the newest addition to the LED Imaging family, the LED IS100 intraoral sensor," said Dr. Jeffrey Brooks, vice president of imaging for LED Imaging. "Digital radiography has been a game changer in dental practices because of the time and cost savings for all involved, so we wanted to give dental practitioners a product that would provide excellent quality day in and day out."
Also at the CDA - South Meeting, LED Imaging will have the RAYSCAN alpha - Expert digital imaging system and LED Imaging Software available for demo and sale. The RAYSCAN alpha - Expert, developed by Ray Co. Ltd., a subsidiary of Samsung, was launched on April 3, 2014, as LED Imaging's premier digital imaging product. The unit offers 3D cone beam computed tomography (CBCT), panoramic and cephalometric imaging capabilities to quickly capture high-quality, 16-bit DICOM images at a low radiation dose.
LED Imaging Software was first introduced at the American Association of Orthodontists (AAO) Annual Session in late April 2014. The software captures, enhances and displays dental images from a variety of digital products, including digital imaging systems, such as digital radiography intraoral sensors, intraoral cameras and extraoral cameras. While the RAYSCAN alpha - Expert and LED IS100 work seamlessly with LED Imaging Software, the software is designed with true open-architecture, allowing integration with any practice management system and compatibility with imaging products from a variety of manufacturers. Additionally, the software acts as a front office tool by enabling users to duplicate films, create referral letters and treatment plans, and electronically transfer images to insurance companies and other doctors.
CDA - South Meeting attendees are encouraged to visit LED Imaging's booth number 2534, to demo the LED IS100, the RAYSCAN alpha - Expert and LED Imaging Software. To learn more about LED Imaging and the LED IS100, call 844.952.7327 or visit www.leddental.com/LED-IS100.
About LED Dental
LED Dental is a wholly owned subsidiary of LED Medical Diagnostics Inc. Founded by the creator of the award-winning VELscope® tissue fluorescence visualization technology, LED Dental now also features the LED Imaging division that provides dentists and oral health specialists with advanced diagnostic imaging products and software. Backed by an experienced leadership team dedicated to a higher level of service and support, LED Dental products seamlessly integrate into dental practices. The company is committed to providing dental practitioners with the best technology available by identifying and adding strong products to its growing portfolio. For more information, call 888.541.4614 or visit www.leddental.com.
About LED Medical Diagnostics Inc.
Founded in 2003 and headquartered in Burnaby, British Columbia, Canada, LED Medical Diagnostics Inc. is a leading developer of LED-based visualization technologies for the medical industry. The company designs and manufactures the VELscope® Vx Enhanced Oral Assessment System, the first system in the world to apply tissue fluorescence visualization technology to the oral cavity. Available through major dental supply distributors, the VELscope® Vx is used to conduct more screenings for oral cancer and other oral diseases than any other adjunctive device. LED Medical Diagnostics is currently listed on the Toronto Stock Exchange (TSX-V) under the symbol "LMD," the OTCQX under the symbol "LEDIF," as well as the Frankfurt Stock Exchange under the symbol "LME." For more information, visit www.ledmd.com.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
This press release contains statements which, to the extent that they are not recitations of historical fact, may constitute forward-looking information under applicable Canadian securities legislation that involve risks and uncertainties. Such forward-looking statements or information include statements regarding, but not limited to the Company's product offerings, the potential applications for its product offerings, potential expansion of the Company's technology to other medical applications or markets, or the potential introduction of new technologies by the Company. Persons reading this press release are cautioned that such statements or information are only predictions, and that the Corporation's actual future results or performance may be materially different. Factors that could cause actual events or results to differ materially from those suggested by these forward-looking statements include, but are not limited to competition risks, distributor risks, product development risks such as regulatory, design, intellectual property and other factors described in the Corporation's reports filed on SEDAR including its Annual Information Form and financial report for the year ended December 31, 2013. These and other factors should be considered carefully and readers should not place undue reliance on such forward-looking information. All forward-looking statements made in this press release are qualified by this cautionary statement and there can be no assurance that actual results or developments anticipated by the Company will be realized. The Company disclaims any intention or obligation to update or revise forward-looking information, whether as a result of new information, future events or otherwise, except as required by law.
Oct. 9, 2015 10:15 AM EDT Reads: 136
Overgrown applications have given way to modular applications, driven by the need to break larger problems into smaller problems. Similarly large monolithic development processes have been forced to be broken into smaller agile development cycles. Looking at trends in software development, microservices architectures meet the same demands. Additional benefits of microservices architectures are compartmentalization and a limited impact of service failure versus a complete software malfunction....
Oct. 9, 2015 10:00 AM EDT Reads: 230
Oct. 9, 2015 10:00 AM EDT Reads: 1,257
Oct. 9, 2015 10:00 AM EDT Reads: 225
Oct. 9, 2015 10:00 AM EDT Reads: 220
Oct. 9, 2015 10:00 AM EDT Reads: 170
Oct. 9, 2015 10:00 AM EDT Reads: 403
Oct. 9, 2015 10:00 AM EDT Reads: 486
In his session at DevOps Summit, Bryan Cantrill, CTO at Joyent, will demonstrate a third path: containers on multi-tenant bare metal that maximizes performance, security, and networking connectivity.
Oct. 9, 2015 10:00 AM EDT Reads: 157
Any Ops team trying to support a company in today’s cloud-connected world knows that a new way of thinking is required – one just as dramatic than the shift from Ops to DevOps. The diversity of modern operations requires teams to focus their impact on breadth vs. depth. In his session at DevOps Summit, Adam Serediuk, Director of Operations at xMatters, Inc., will discuss the strategic requirements of evolving from Ops to DevOps, and why modern Operations has begun leveraging the “NoOps” approa...
Oct. 9, 2015 10:00 AM EDT Reads: 149
The buzz continues for cloud, data analytics and the Internet of Things (IoT) and their collective impact across all industries. But a new conversation is emerging - how do companies use industry disruption and technology enablers to lead in markets undergoing change, uncertainty and ambiguity? Organizations of all sizes need to evolve and transform, often under massive pressure, as industry lines blur and merge and traditional business models are assaulted and turned upside down. In this new da...
Oct. 9, 2015 10:00 AM EDT Reads: 287
SYS-CON Events announced today that Harbinger Systems will exhibit at SYS-CON's 17th International Cloud Expo®, which will take place on November 3–5, 2015, at the Santa Clara Convention Center in Santa Clara, CA. Harbinger Systems is a global company providing software technology services. Since 1990, Harbinger has developed a strong customer base worldwide. Its customers include software product companies ranging from hi-tech start-ups in Silicon Valley to leading product companies in the US a...
Oct. 9, 2015 10:00 AM EDT Reads: 770
Oct. 9, 2015 09:45 AM EDT Reads: 109
Today air travel is a minefield of delays, hassles and customer disappointment. Airlines struggle to revitalize the experience. GE and M2Mi will demonstrate practical examples of how IoT solutions are helping airlines bring back personalization, reduce trip time and improve reliability. In their session at @ThingsExpo, Shyam Varan Nath, Principal Architect with GE, and Dr. Sarah Cooper, M2Mi's VP Business Development and Engineering, will explore the IoT cloud-based platform technologies driv...
Oct. 9, 2015 09:45 AM EDT
Docker is hot. However, as Docker container use spreads into more mature production pipelines, there can be issues about control of Docker images to ensure they are production-ready. Is a promotion-based model appropriate to control and track the flow of Docker images from development to production? In his session at DevOps Summit, Fred Simon, Co-founder and Chief Architect of JFrog, will demonstrate how to implement a promotion model for Docker images using a binary repository, and then show h...
Oct. 9, 2015 09:45 AM EDT Reads: 108