Welcome!

News Feed Item

Rio Alto Drills 314 m @ 0.7 g/t Au at La Arena

VANCOUVER, BRITISH COLUMBIA -- (Marketwired) -- 05/15/14 -- Rio Alto Mining Limited ("Rio Alto" or the "Company") (TSX: RIO)(NYSE: RIOM)(LMA: RIO)(DBFrankfurt: MS2) is pleased to report assay results from 19 reverse circulation ("RC") drill holes within and around the Calaorco Pit at the Company's La Arena Gold Oxide Mine located in La Libertad, northern Peru.

Reference is made to the 2014 oxide gold Reserve Pit which is detailed in the La Arena Project Technical Report with an effective date of December 31, 2013, prepared on behalf of the Company by Mining Plus Peru S.A.C. (the "December 2013 Report"), a copy of which is available under the Company's SEDAR profile at www.sedar.com.

The more significant intercepts were:

CA-R14-007 - 74 m @ 0.42 g/t Au, including 22 m @ 1.06 g/t Au, all of which being outside the 2014 Reserve Pit.

CA-R14-015 - 314 m @ 0.7 g/t Au, of which 166 m @ 0.80 g/t Au being outside the 2014 Reserve Pit.

CA-R14-016 - 230 m @ 0.97 g/t Au, of which 74 m @ 0.67 g/t Au being outside the 2014 Reserve Pit.

Rio Alto acquired the La Arena Gold Project in mid-2009 from IAMGOLD with the objective of bringing the mine into production as rapidly as possible. Twenty months later, the first gold bar at La Arena was poured and since then the Company has produced approximately 550,000 ounces of gold. The principal focus during the first two years of project ownership was to achieve gold production to allow the Company to generate cash flow and fund further expansion and development of the project from this cash flow. Exploration drilling was deferred during this period and only commenced after positive cash flow started to be generated by the project in early 2012.

Since 2012, oxide drilling has resulted in the gold oxide reserve increasing from 821,000 ounces at the beginning of 2011 to 1,056,000 ounces at the beginning of 2014 with approximately 500,000 ounces having been produced during the first two and half years of production. This represents an increase of approximately 780,000 ounces since mining commenced at La Arena.

The following results are from the first 19 RC holes drilled at Calaorco during 2014 with 13 out of the 19 holes intersecting gold mineralization above the mining cutoff grade. These drill holes were within ("Inside") and extended outside or below ("Outside") the 2014 gold oxide Reserve Pit.

The results of the recent drilling program demonstrate that a large amount of oxide brecciated sandstone mineralization (the main mineral type at La Arena) lies outside the 2014 Reserve Pit. The results are very encouraging and indicate the potential to increase oxide gold resources and reserves and the possibility of extending mine life beyond 2019.

A total of 14,200 metres of RC drilling is currently planned to be completed during 2014, in and around the Calaorco Pit. The Company's geologists will interpret the data generated by this drilling program, once it is completed, with the objective of calculating an updated resource and reserve estimate for the gold oxide mineralization at La Arena. Management expects that this drilling program has the potential to allow positive changes to be made to the resource block classification, define new resource blocks and given that the deposit is open to the northwest and at depth, identify new areas to test in order to further increase resources and reserves in the future. The updated resource and reserve estimate for the gold oxide mineralization at La Arena is expected to be released in Q1, 2015.

Drill Results

References to the comments in the following table refer to intercepts within ("Inside") the 2014 Reserve Pit or drill hole intercepts that extended outside or below ("Outside") the 2014 Reserve Pit. A map illustrating drill hole locations and selected drill hole cross sections related to this press release may be accessed by following this link.

Hole ID      From     To  Interval  Au g/t  Ag g/t  Cu ppm          Comments
============================================================================
CA-R14-001           Not significant Intercepts
CA-R14-002           Not significant Intercepts
CA-R14-003    116    176        60    0.31    1.97      77    Inside Reserve
                                                                         Pit
 Including    116    134        18    0.72    3.56     151   Outside Reserve
                                                                         Pit
CA-R14-003    190    218        28    0.44    1.04     176   Outside Reserve
                                                                         Pit
CA-R14-004      6     26        20    0.14    0.13      28    Inside Reserve
                                                                         Pit
CA-R14-004     92    110        18    0.15    0.21      28    Inside Reserve
                                                                         Pit
CA-R14-004    120    168        48    0.38    0.92      36   Outside Reserve
                                                                         Pit
CA-R14-005           Not significant Intercepts
CA-R14-006           Not significant Intercepts
CA-R14-007     12     94        82    0.62    0.62     101    Inside Reserve
                                                                         Pit
CA-R14-007    110    138        28    0.19    0.32      16   Outside Reserve
                                                                         Pit
CA-R14-007    150    164        14    0.16    0.33      44   Outside Reserve
                                                                         Pit
CA-R14-007    202    276        74    0.42    0.51      83   Outside Reserve
                                                                         Pit
 Including    254    276        22    1.06    1.30     146   Outside Reserve
                                                                         Pit
CA-R14-008           Not significant Intercepts
CA-R14-009     30     90        60    0.18    0.36      52    Inside Reserve
                                                                         Pit
CA-R14-009    112    272       160    0.40    0.71      68   Outside Reserve
                                                                         Pit
 Including    254    268        14    1.56    0.73     113   Outside Reserve
                                                                         Pit
CA-R14-010           Not significant Intercepts
CA-R14-011           Not significant Intercepts
CA-R14-012           Not significant Intercepts
CA-R14-013     28     44        16    0.29    0.73      16    Inside Reserve
                                                                         Pit
CA-R14-013     66     76        10    0.23    0.74      17    Inside Reserve
                                                                         Pit
CA-R14-013    108    118        10    0.16    0.32      23   Outside Reserve
                                                                         Pit
CA-R14-013    132    150        18    0.18    0.32      21   Outside Reserve
                                                                         Pit
CA-R14-013    166    248        82    0.25    0.26      66   Outside Reserve
                                                                         Pit
 Including    166    188        22    0.46    0.39     163   Outside Reserve
                                                                         Pit
CA-R14-014     18     56        38    0.20    0.13      60    Inside Reserve
                                                                         Pit
CA-R14-014     64    118        54    0.70    0.55      55    Inside Reserve
                                                                         Pit
 Including     82     86         4    1.26    1.15      24    Inside Reserve
                                                                         Pit
 Including    102    108         6    4.10    1.57     238    Inside Reserve
                                                                         Pit
CA-R14-014    156    162         6    1.93    0.87     226   Outside Reserve
                                                                         Pit
CA-R14-014    152    222        70    0.35    0.34      50   Outside Reserve
                                                                         Pit
 Including    206    210         4    1.12    0.30     133   Outside Reserve
                                                                         Pit
CA-R14-014    232    282        50    0.74    0.19      88   Outside Reserve
                                                                         Pit
 Including    266    280        14    1.90    0.24     233   Outside Reserve
                                                                         Pit
CA-R14-014    294    304        10    0.15    0.22      11   Outside Reserve
                                                                         Pit
CA-R14-015      0      8         8    0.29    0.10     113    Inside Reserve
                                                                         Pit
CA-R14-015     22    336       314    0.70    0.21     113    Inside Reserve
                                                                         Pit
 Including     22     26         4    2.15    0.10     432    Inside Reserve
                                                                         Pit
 Including     72     86        14    0.96    0.21      43    Inside Reserve
                                                                         Pit
 Including     96    110        14    2.18    0.53      72   Outside Reserve
                                                                         Pit
 Including    170    336       166    0.80    0.24     137   Outside Reserve
                                                                         Pit
CA-R14-016      0    230       230    0.97    0.72      78    Inside/Outside
                                                                 Reserve Pit
 Including      0     36        36    2.75    1.11      28    Inside Reserve
                                                                         Pit
 Including    156    230        74    0.67    0.70     123   Outside Reserve
                                                                         Pit
 Including    214    230        16    1.38    1.99     242   Outside Reserve
                                                                         Pit
CA-R14-017      0    164       164    0.45    0.17      80    Inside/Outside
                                                                 Reserve Pit
 Including     40     48         8    1.72    0.23     372    Inside Reserve
                                                                         Pit
 Including     82     94        12    1.69    0.15     269    Inside Reserve
                                                                         Pit
CA-R14-017    206    226        20    0.23    0.10      17   Outside Reserve
                                                                         Pit
CA-R14-018    102    210       108    0.20    0.80      32    Inside Reserve
                                                                         Pit
 Including    114    128        14    0.82    1.63      73   Outside Reserve
                                                                         Pit
CA-R14-019     30     78        48    0.72    0.68      69    Inside Reserve
                                                                         Pit
 Including     38     68        30    1.04    0.67      94    Inside Reserve
                                                                         Pit
CA-R14-019     88    138        50    0.21    0.65      22    Inside Reserve
                                                                         Pit
CA-R14-019    172    210        38    0.49    1.22     211   Outside Reserve
                                                                         Pit
 Including    182    192        10    0.85    1.78      80   Outside Reserve
                                                                         Pit
CA-R14-019    224    241        17    0.32    0.35      32   Outside Reserve
                                                                         Pit

Sampling of the reverse circulation drilling and sample preparation were performed by Rio Alto personnel and were carried out under strict protocols recommended in the NI 43-101 Technical Report dated July 31, 2010 prepared by Coffey Mining Pty Ltd for the Company (the "Report"). Samples were taken every 2m and split in half to yield seven to ten kilogram samples. Drill sample recovery was generally in excess of 90%. Rio Alto has a rigorous QA/QC program over the chain-of-custody of samples and the insertion of blanks, duplicates, and certified reference standards in each batch of samples. Samples were shipped to CERTIMIN in Lima where they were dried, crushed, pulverized, and assayed. All gold assays were obtained by standard 50g fire assaying with AA finish. All silver assays reported in the press release were obtained by Aqua-Regia dissolution followed by ICP measurement. CERTIMIN is an ISO 9001:2000 certified laboratory.

Phase II Update

Good progress is being made in respect to the completion of the feasibility study for the Phase II copper/gold project at La Arena. On January 6, 2014, the Company announced that it had received formal notification from the Ministry of Energy and Mines of Peru that approval had been given for modifications to its Environmental Impact Study (EIA) for the La Arena Project Gold Oxide Mine. This EIA modification allows Rio Alto to apply for permits for a future Phase II open pit sulphide mine, construct an 18,000 tonne per day copper/gold concentrator, expand the current waste dump facilities to accommodate sulphide waste and to use the Calaorco Pit for tailings deposition once open pit oxide reserves are exhausted. However, the recent increase in the size of the adjacent gold oxide deposit and possible expansion of the oxide resources and reserves as a consequence of the ongoing drill program, has meant that the general layout of the Phase II infrastructure needs to be revised. It is important that none of the Phase II infrastructure, such as process plant, conveying systems, stockpiles and waste dumps are impeding the possible future expansion of the oxide mine and its associated infrastructure. This revision of the general layout has meant that the completion of the feasibility study will be delayed until later in the year. Current estimates for timing are sometime in Q4, 2014.

"We are all excited at the results coming out of our current oxide drilling program at La Arena. It is hoped that the program underway can increase the size and life of the gold oxide mine and provide our technical team with a better understanding of what the optimal general layout for Phase II should be. La Arena has been a great project from the outset and continues to evolve positively for all stakeholders involved," commented Alex Black, President & CEO.

Mr. Enrique Garay, MSc. P.Geo (AIG Member), Vice President Geology of Rio Alto, is the Qualified Person (as defined by NI 43-101) responsible for managing the Company's exploration programs and disclosure of drilling results. Mr. Garay has read and approved the scientific and technical information in this news release.

For additional information regarding La Arena Project please refer to the December 2013 Report prepared on behalf of the Company by Mining Plus Peru S.A.C., a copy of which is available on the Company's SEDAR profile at www.sedar.com.

Forward-Looking Statements

Certain statements contained herein constitute forward-looking statements, most particularly the potential to increase the resource and reserve estimate of the gold oxide mineralization at La Arena Project, the timing for the completion of an updated resource and reserve estimate for the gold oxide mineralization at La Arena Project, to extend the life of La Arena Gold Oxide Mine and the timing for the completion of a feasibility study for the La Arena copper/gold sulphide project. All statements included herein, other than statements of historical fact, are forward-looking information and such information involves various risks and uncertainties. Rio Alto believes the expectations reflected in these forward looking statements are reasonable but no assurance can be given that these expectations will prove to be correct and such forward-looking statements in this press release should not be unduly relied upon. A description of assumptions used to develop such forward-looking information and a description of risk factors that may cause actual results to differ materially from forward-looking information can be found in Rio Alto's disclosure documents on the SEDAR website at www.sedar.com. Forward-looking statements included in this press release are made as of the date of this press release and Rio Alto disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as expressly required by applicable securities legislation.

To learn more about Rio Alto Mining Limited, please visit: www.rioaltomining.com or Rio Alto's SEDAR profile at www.sedar.com.

ON BEHALF OF THE BOARD OF RIO ALTO MINING LIMITED

Alex Black, President, CEO & Director

Contacts:
Rio Alto Mining Limited
Alex Black
President & CEO
+511 625 9900
866.393.4493 (FAX)
[email protected]

Rio Alto Mining Limited
Alejandra Gomez
Investor Relations
604.628.1401
866.393.4493 (FAX)
[email protected]
www.rioaltomining.com

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
DX World EXPO, LLC, a Lighthouse Point, Florida-based startup trade show producer and the creator of "DXWorldEXPO® - Digital Transformation Conference & Expo" has announced its executive management team. The team is headed by Levent Selamoglu, who has been named CEO. "Now is the time for a truly global DX event, to bring together the leading minds from the technology world in a conversation about Digital Transformation," he said in making the announcement.
"Space Monkey by Vivent Smart Home is a product that is a distributed cloud-based edge storage network. Vivent Smart Home, our parent company, is a smart home provider that places a lot of hard drives across homes in North America," explained JT Olds, Director of Engineering, and Brandon Crowfeather, Product Manager, at Vivint Smart Home, in this SYS-CON.tv interview at @ThingsExpo, held Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA.
SYS-CON Events announced today that Conference Guru has been named “Media Sponsor” of the 22nd International Cloud Expo, which will take place on June 5-7, 2018, at the Javits Center in New York, NY. A valuable conference experience generates new contacts, sales leads, potential strategic partners and potential investors; helps gather competitive intelligence and even provides inspiration for new products and services. Conference Guru works with conference organizers to pass great deals to gre...
DevOps is under attack because developers don’t want to mess with infrastructure. They will happily own their code into production, but want to use platforms instead of raw automation. That’s changing the landscape that we understand as DevOps with both architecture concepts (CloudNative) and process redefinition (SRE). Rob Hirschfeld’s recent work in Kubernetes operations has led to the conclusion that containers and related platforms have changed the way we should be thinking about DevOps and...
The Internet of Things will challenge the status quo of how IT and development organizations operate. Or will it? Certainly the fog layer of IoT requires special insights about data ontology, security and transactional integrity. But the developmental challenges are the same: People, Process and Platform. In his session at @ThingsExpo, Craig Sproule, CEO of Metavine, demonstrated how to move beyond today's coding paradigm and shared the must-have mindsets for removing complexity from the develop...
In his Opening Keynote at 21st Cloud Expo, John Considine, General Manager of IBM Cloud Infrastructure, led attendees through the exciting evolution of the cloud. He looked at this major disruption from the perspective of technology, business models, and what this means for enterprises of all sizes. John Considine is General Manager of Cloud Infrastructure Services at IBM. In that role he is responsible for leading IBM’s public cloud infrastructure including strategy, development, and offering m...
The next XaaS is CICDaaS. Why? Because CICD saves developers a huge amount of time. CD is an especially great option for projects that require multiple and frequent contributions to be integrated. But… securing CICD best practices is an emerging, essential, yet little understood practice for DevOps teams and their Cloud Service Providers. The only way to get CICD to work in a highly secure environment takes collaboration, patience and persistence. Building CICD in the cloud requires rigorous ar...
Companies are harnessing data in ways we once associated with science fiction. Analysts have access to a plethora of visualization and reporting tools, but considering the vast amount of data businesses collect and limitations of CPUs, end users are forced to design their structures and systems with limitations. Until now. As the cloud toolkit to analyze data has evolved, GPUs have stepped in to massively parallel SQL, visualization and machine learning.
"Evatronix provides design services to companies that need to integrate the IoT technology in their products but they don't necessarily have the expertise, knowledge and design team to do so," explained Adam Morawiec, VP of Business Development at Evatronix, in this SYS-CON.tv interview at @ThingsExpo, held Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA.
To get the most out of their data, successful companies are not focusing on queries and data lakes, they are actively integrating analytics into their operations with a data-first application development approach. Real-time adjustments to improve revenues, reduce costs, or mitigate risk rely on applications that minimize latency on a variety of data sources. In his session at @BigDataExpo, Jack Norris, Senior Vice President, Data and Applications at MapR Technologies, reviewed best practices to ...
Widespread fragmentation is stalling the growth of the IIoT and making it difficult for partners to work together. The number of software platforms, apps, hardware and connectivity standards is creating paralysis among businesses that are afraid of being locked into a solution. EdgeX Foundry is unifying the community around a common IoT edge framework and an ecosystem of interoperable components.
"ZeroStack is a startup in Silicon Valley. We're solving a very interesting problem around bringing public cloud convenience with private cloud control for enterprises and mid-size companies," explained Kamesh Pemmaraju, VP of Product Management at ZeroStack, in this SYS-CON.tv interview at 21st Cloud Expo, held Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA.
Large industrial manufacturing organizations are adopting the agile principles of cloud software companies. The industrial manufacturing development process has not scaled over time. Now that design CAD teams are geographically distributed, centralizing their work is key. With large multi-gigabyte projects, outdated tools have stifled industrial team agility, time-to-market milestones, and impacted P&L stakeholders.
"Akvelon is a software development company and we also provide consultancy services to folks who are looking to scale or accelerate their engineering roadmaps," explained Jeremiah Mothersell, Marketing Manager at Akvelon, in this SYS-CON.tv interview at 21st Cloud Expo, held Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA.
Enterprises are adopting Kubernetes to accelerate the development and the delivery of cloud-native applications. However, sharing a Kubernetes cluster between members of the same team can be challenging. And, sharing clusters across multiple teams is even harder. Kubernetes offers several constructs to help implement segmentation and isolation. However, these primitives can be complex to understand and apply. As a result, it’s becoming common for enterprises to end up with several clusters. Thi...