|By Marketwired .||
|May 21, 2014 02:51 PM EDT||
KITCHENER, ONTARIO -- (Marketwired) -- 05/21/14 -- Optimalon Software has launched a new version of a free web-based application that provides cutting optimization for rectangular panels. It got a completely new user interface with plain registration and project management functionality.
This new version provides the long-wanted ability to specify the panels and parts-measurement units. It supports both metric (millimeters, centimeters and meters) and imperial (feet, inches) units. Users can now specify inches in fractions or decimals in a convenient and simple way.
Users can designate any parts that need to be cut from the stocks as "non-rotatable" during the calculation to preserve the grain orientation. In a labour-intensive and fast-paced cabinetmaking environment, reduction of cutting operations and time is highly important. The online cutter has an option to minimize the number of cutting layouts. Hence, several stocks can be place in a pile and cut at once.
The material utilization rate depends on the complexity of the cutting layout. Usually more complicated layouts provide higher utilization rates; however, they require more turns and cuts. The online panel cutter provides five levels of cut complexity to satisfy all possible working conditions and used materials.
Rough and damaged edges of stock panels must be trimmed before processing, and Optimalon's optimizer provides a separate web page where the user specifies trim sizes for each side of the panels. These sizes are taken into account during the calculation, and the working size of the panels is adjusted accordingly.
With this upgrade, Optimalon also implemented a new calculation page that displays the status of the current optimization run, as well as start and elapsed times. The calculation time depends on the size of the projects and can vary from a couple of seconds to several minutes. If the optimization process takes a long time, the user has the ability to stop it.
The result summary gives the used and waste areas, utilization rate and number of cut parts and un-cut parts (if any). For each cutting layout there is graphical web page with navigation and zoom-in and zoom-out functionalities.
Premium users now have the functionality to save the resulting graphical layouts and locations of each part and cutting sequence into an Excel spreadsheet file, which can be printed and provided to the cutting operators. Should they require any post-processing steps, the online panel cutter provides export of the cutting layouts into AutoCAD DXF file (R12 format).
The online panel cutter is free to anyone and accessible from Optimalon's website at the following link: http://www.optimalon.com/online_cut_optimizer.htm
Optimalon Software Ltd.
500 Hidden Creek Drive
Kitchener, Ontario, N2N 3M1, Canada
In his session at Cloud Expo, Robert Cohen, an economist and senior fellow at the Economic Strategy Institute, provideed economic scenarios that describe how the rapid adoption of software-defined everything including cloud services, SDDC and open networking will change GDP, industry growth, productivity and jobs. This session also included a drill down for several industries such as finance, social media, cloud service providers and pharmaceuticals.
Dec. 9, 2016 03:45 PM EST Reads: 558
"Dice has been around for the last 20 years. We have been helping tech professionals find new jobs and career opportunities," explained Manish Dixit, VP of Product and Engineering at Dice, in this SYS-CON.tv interview at 19th Cloud Expo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
Dec. 9, 2016 03:30 PM EST Reads: 1,224
Extracting business value from Internet of Things (IoT) data doesn’t happen overnight. There are several requirements that must be satisfied, including IoT device enablement, data analysis, real-time detection of complex events and automated orchestration of actions. Unfortunately, too many companies fall short in achieving their business goals by implementing incomplete solutions or not focusing on tangible use cases. In his general session at @ThingsExpo, Dave McCarthy, Director of Products...
Dec. 9, 2016 03:15 PM EST Reads: 975
"ReadyTalk is an audio and web video conferencing provider. We've really come to embrace WebRTC as the platform for our future of technology," explained Dan Cunningham, CTO of ReadyTalk, in this SYS-CON.tv interview at WebRTC Summit at 19th Cloud Expo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
Dec. 9, 2016 03:15 PM EST Reads: 852
Infrastructure is widely available, but who’s managing inbound/outbound traffic? Data is created, stored, and managed online – who is protecting it and how? In his session at 19th Cloud Expo, Jaeson Yoo, SVP of Business Development at Penta Security Systems Inc., discussed how to keep any and all infrastructure clean, safe, and efficient by monitoring and filtering all malicious HTTP/HTTPS traffic at the OSI Layer 7. Stop attacks and web intruders before they can enter your network.
Dec. 9, 2016 03:00 PM EST Reads: 351
@DevOpsSummit taking place June 6-8, 2017 at Javits Center, New York City, is co-located with the 20th International Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world. @DevOpsSummit at Cloud Expo New York Call for Papers is now open.
Dec. 9, 2016 03:00 PM EST Reads: 2,006
The many IoT deployments around the world are busy integrating smart devices and sensors into their enterprise IT infrastructures. Yet all of this technology – and there are an amazing number of choices – is of no use without the software to gather, communicate, and analyze the new data flows. Without software, there is no IT. In this power panel at @ThingsExpo, moderated by Conference Chair Roger Strukhoff, Dave McCarthy, Director of Products at Bsquare Corporation; Alan Williamson, Principal...
Dec. 9, 2016 02:45 PM EST Reads: 622
Businesses and business units of all sizes can benefit from cloud computing, but many don't want the cost, performance and security concerns of public cloud nor the complexity of building their own private clouds. Today, some cloud vendors are using artificial intelligence (AI) to simplify cloud deployment and management. In his session at 20th Cloud Expo, Ajay Gulati, Co-founder and CEO of ZeroStack, will discuss how AI can simplify cloud operations. He will cover the following topics: why clou...
Dec. 9, 2016 02:45 PM EST Reads: 1,032
Video experiences should be unique and exciting! But that doesn’t mean you need to patch all the pieces yourself. Users demand rich and engaging experiences and new ways to connect with you. But creating robust video applications at scale can be complicated, time-consuming and expensive. In his session at @ThingsExpo, Zohar Babin, Vice President of Platform, Ecosystem and Community at Kaltura, discussed how VPaaS enables you to move fast, creating scalable video experiences that reach your aud...
Dec. 9, 2016 02:42 PM EST Reads: 180
Cloud Expo, Inc. has announced today that Andi Mann returns to 'DevOps at Cloud Expo 2017' as Conference Chair The @DevOpsSummit at Cloud Expo will take place on June 6-8, 2017, at the Javits Center in New York City, NY. "DevOps is set to be one of the most profound disruptions to hit IT in decades," said Andi Mann. "It is a natural extension of cloud computing, and I have seen both firsthand and in independent research the fantastic results DevOps delivers. So I am excited to help the great t...
Dec. 9, 2016 02:30 PM EST Reads: 788
Rapid innovation, changing business landscapes, and new IT demands force businesses to make changes quickly. In the eyes of many, containers are at the brink of becoming a pervasive technology in enterprise IT to accelerate application delivery. In this presentation, attendees learned about the: The transformation of IT to a DevOps, microservices, and container-based architecture What are containers and how DevOps practices can operate in a container-based environment A demonstration of how ...
Dec. 9, 2016 02:30 PM EST Reads: 1,258
"At ROHA we develop an app called Catcha. It was developed after we spent a year meeting with, talking to, interacting with senior citizens watching them use their smartphones and talking to them about how they use their smartphones so we could get to know their smartphone behavior," explained Dave Woods, Chief Innovation Officer at ROHA, in this SYS-CON.tv interview at 19th Cloud Expo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
Dec. 9, 2016 02:15 PM EST Reads: 811
In this strange new world where more and more power is drawn from business technology, companies are effectively straddling two paths on the road to innovation and transformation into digital enterprises. The first path is the heritage trail – with “legacy” technology forming the background. Here, extant technologies are transformed by core IT teams to provide more API-driven approaches. Legacy systems can restrict companies that are transitioning into digital enterprises. To truly become a lead...
Dec. 9, 2016 02:15 PM EST Reads: 367
Without lifecycle traceability and visibility across the tool chain, stakeholders from Planning-to-Ops have limited insight and answers to who, what, when, why and how across the DevOps lifecycle. This impacts the ability to deliver high quality software at the needed velocity to drive positive business outcomes. In his general session at @DevOpsSummit at 19th Cloud Expo, Phil Hombledal, Solution Architect at CollabNet, discussed how customers are able to achieve a level of transparency that e...
Dec. 9, 2016 02:15 PM EST Reads: 1,289
WebRTC is the future of browser-to-browser communications, and continues to make inroads into the traditional, difficult, plug-in web communications world. The 6th WebRTC Summit continues our tradition of delivering the latest and greatest presentations within the world of WebRTC. Topics include voice calling, video chat, P2P file sharing, and use cases that have already leveraged the power and convenience of WebRTC.
Dec. 9, 2016 02:15 PM EST Reads: 1,776