Welcome!

News Feed Item

Dundee Sustainable Technologies Inc. Innovates in Nickel Extraction

MONTREAL, QUEBEC -- (Marketwired) -- 05/23/14 -- Dundee Sustainable Technologies Inc. ("DSTI" or the "Corporation") (CSE:DST), the developer and owner of proprietary technologies to serve the natural resource sector with environmentally friendly procedures, is pleased to announce an innovation in the nickel extraction.

The Corporation is pleased to report the successful application of its patented proprietary process for nickel extraction from laterites for the production of nickel sulfate. This new concept was applied on laterites from Guatemala, Cuba and the United States, and achieved a nickel extraction ranging from 95% to 97%, at ambient pressure and moderate temperature, over a short period of time.

This approach has greatly simplified the collection of nickel from laterites as per the following table:


---------------------------------------------------------------------------
                DSTI                Pressure leaching   Ferro-nickel       
---------------------------------------------------------------------------
Extraction      Typically 95%       Typically 95%       Typically 80%      
yield                                                                      
---------------------------------------------------------------------------
Processing time 15 minutes          Several hours       Continuous         
---------------------------------------------------------------------------
Pressure        Atmospheric         Pressurized         Atmospheric        
---------------------------------------------------------------------------
Temperature     Ambiant             Above 150 degrees C Above 1 000 degrees
                                                        C                  
---------------------------------------------------------------------------
Limitations     No limit for MgO    Low MgO content     Limitation on MgO, 
                and SiO2                                SiO2 and Al2O3     
---------------------------------------------------------------------------
Environment     Low impact          Low impact          Significant impact 
                                                        high carbon oxides 
                                                        emission           
---------------------------------------------------------------------------
Capital costs   Low                 Expensive           Expensive arc      
                                    autoclaves          furnace and        
                                    pressurized         pelletizing        
                                    equipment           equipment          
---------------------------------------------------------------------------
Operation costs Low energy          Autoclave           Most costly nickel 
                dilute sulfuric     maintenance, high   (high energy       
                acid                pressure oxygen,    consumption)       
                                    concentrated                           
                                    sulfuric acid                          
---------------------------------------------------------------------------

About Dundee Sustainable Technologies, a company controlled by Dundee Corporation

The cyanide and mercury free gold extraction process developed by DSTI, has been recognized as a "green technology" for which DSTI has been awarded $5,700,000 in grants to date for a demonstration plant, presently under construction in Thetford Mines Quebec of which $700,000 has been provided by the Government of Quebec and $5,000,000 by the Government of Canada through the Sustainable Development Technology Fund. The plant is scheduled to go into operation in mid-January 2015.

Over the last ten years DSTI has tested over 50 different gold deposits, both oxide and sulfide ores at the lab level and at its pilot plant. These tests have, consistently achieved gold recoveries in excess of 90%, using chlorination instead of cyanide. In addition, the tailings from the process are inert from toxic substances and as result meet environmental norms. An engineering study completed within the last 12 months supports DSTI's claim of having operated a pilot plant showing a gold extraction yield higher than 90% using a closed-circuit chlorination process.

FORWARD LOOKING STATEMENTS: This press release contains forward-looking statements that address future events and conditions, which are subject to various risks and uncertainties. Actual results could differ materially from those anticipated in such forward- looking statements as a result of numerous factors, some of which may be beyond the Corporation's control. These factors include: results of exploration activities, general market and industry conditions, and other risks disclosed in the Corporation's filings with Canadian Securities Regulators.

Forward-looking statements are based on the expectations and opinions of the Corporation's management on the date the statements are made. The assumptions used in the preparation of such statements, although considered reasonable at the time of preparation, may prove to be imprecise and, as such, undue reliance should not be placed on forward-looking statements. The Corporation expressly disclaims any intention or obligation to update or revise any forward-looking statements whether as a result of new information, future events or otherwise, except as required by applicable law. Depending on exploration results and available financing, the Corporation may at any point modify its work program.

The Canadian Securities Exchange has in no way passed upon the merits of the proposed transaction and has neither approved nor disapproved the contents of this press release.

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
In addition to all the benefits, IoT is also bringing new kind of customer experience challenges - cars that unlock themselves, thermostats turning houses into saunas and baby video monitors broadcasting over the internet. This list can only increase because while IoT services should be intuitive and simple to use, the delivery ecosystem is a myriad of potential problems as IoT explodes complexity. So finding a performance issue is like finding the proverbial needle in the haystack.
The idea of comparing data in motion (at the sensor level) to data at rest (in a Big Data server warehouse) with predictive analytics in the cloud is very appealing to the industrial IoT sector. The problem Big Data vendors have, however, is access to that data in motion at the sensor location. In his session at @ThingsExpo, Scott Allen, CMO of FreeWave, discussed how as IoT is increasingly adopted by industrial markets, there is going to be an increased demand for sensor data from the outermos...
"Qosmos has launched L7Viewer, a network traffic analysis tool, so it analyzes all the traffic between the virtual machine and the data center and the virtual machine and the external world," stated Sebastien Synold, Product Line Manager at Qosmos, in this SYS-CON.tv interview at 19th Cloud Expo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
Between 2005 and 2020, data volumes will grow by a factor of 300 – enough data to stack CDs from the earth to the moon 162 times. This has come to be known as the ‘big data’ phenomenon. Unfortunately, traditional approaches to handling, storing and analyzing data aren’t adequate at this scale: they’re too costly, slow and physically cumbersome to keep up. Fortunately, in response a new breed of technology has emerged that is cheaper, faster and more scalable. Yet, in meeting these new needs they...
When it comes to cloud computing, the ability to turn massive amounts of compute cores on and off on demand sounds attractive to IT staff, who need to manage peaks and valleys in user activity. With cloud bursting, the majority of the data can stay on premises while tapping into compute from public cloud providers, reducing risk and minimizing need to move large files. In his session at 18th Cloud Expo, Scott Jeschonek, Director of Product Management at Avere Systems, discussed the IT and busin...
Data is the fuel that drives the machine learning algorithmic engines and ultimately provides the business value. In his session at 20th Cloud Expo, Ed Featherston, director/senior enterprise architect at Collaborative Consulting, will discuss the key considerations around quality, volume, timeliness, and pedigree that must be dealt with in order to properly fuel that engine.
More and more companies are looking to microservices as an architectural pattern for breaking apart applications into more manageable pieces so that agile teams can deliver new features quicker and more effectively. What this pattern has done more than anything to date is spark organizational transformations, setting the foundation for future application development. In practice, however, there are a number of considerations to make that go beyond simply “build, ship, and run,” which changes how...
In his general session at 19th Cloud Expo, Manish Dixit, VP of Product and Engineering at Dice, discussed how Dice leverages data insights and tools to help both tech professionals and recruiters better understand how skills relate to each other and which skills are in high demand using interactive visualizations and salary indicator tools to maximize earning potential. Manish Dixit is VP of Product and Engineering at Dice. As the leader of the Product, Engineering and Data Sciences team at D...
SYS-CON Events has announced today that Roger Strukhoff has been named conference chair of Cloud Expo and @ThingsExpo 2017 New York. The 20th Cloud Expo and 7th @ThingsExpo will take place on June 6-8, 2017, at the Javits Center in New York City, NY. "The Internet of Things brings trillions of dollars of opportunity to developers and enterprise IT, no matter how you measure it," stated Roger Strukhoff. "More importantly, it leverages the power of devices and the Internet to enable us all to im...
Whether your IoT service is connecting cars, homes, appliances, wearable, cameras or other devices, one question hangs in the balance – how do you actually make money from this service? The ability to turn your IoT service into profit requires the ability to create a monetization strategy that is flexible, scalable and working for you in real-time. It must be a transparent, smoothly implemented strategy that all stakeholders – from customers to the board – will be able to understand and comprehe...
"We are the public cloud providers. We are currently providing 50% of the resources they need for doing e-commerce business in China and we are hosting about 60% of mobile gaming in China," explained Yi Zheng, CPO and VP of Engineering at CDS Global Cloud, in this SYS-CON.tv interview at 19th Cloud Expo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
"Once customers get a year into their IoT deployments, they start to realize that they may have been shortsighted in the ways they built out their deployment and the key thing I see a lot of people looking at is - how can I take equipment data, pull it back in an IoT solution and show it in a dashboard," stated Dave McCarthy, Director of Products at Bsquare Corporation, in this SYS-CON.tv interview at @ThingsExpo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
In IT, we sometimes coin terms for things before we know exactly what they are and how they’ll be used. The resulting terms may capture a common set of aspirations and goals – as “cloud” did broadly for on-demand, self-service, and flexible computing. But such a term can also lump together diverse and even competing practices, technologies, and priorities to the point where important distinctions are glossed over and lost.
What happens when the different parts of a vehicle become smarter than the vehicle itself? As we move toward the era of smart everything, hundreds of entities in a vehicle that communicate with each other, the vehicle and external systems create a need for identity orchestration so that all entities work as a conglomerate. Much like an orchestra without a conductor, without the ability to secure, control, and connect the link between a vehicle’s head unit, devices, and systems and to manage the ...
All clouds are not equal. To succeed in a DevOps context, organizations should plan to develop/deploy apps across a choice of on-premise and public clouds simultaneously depending on the business needs. This is where the concept of the Lean Cloud comes in - resting on the idea that you often need to relocate your app modules over their life cycles for both innovation and operational efficiency in the cloud. In his session at @DevOpsSummit at19th Cloud Expo, Valentin (Val) Bercovici, CTO of Soli...