Welcome!

News Feed Item

Dolphin Technology Adopts NanoSpice Giga From ProPlus Design Solutions for 28/16nm IP Characterization, Verification

NanoSpice Giga Selected for Its Ability to Handle Large-Scale Designs With SPICE Engine

SAN JOSE, CA -- (Marketwired) -- 05/28/14 -- ProPlus Design Solutions, Inc. today announced Dolphin Technology has adopted NanoSpice™ Giga, a high performance, giga-scale capacity SPICE simulator, for use with 28- and 16-nanometer (nm) design characterization and verification.

NanoSpice Giga has been implemented into Dolphin Technology's design flow and used for both 28nm and 16nm FinFET product designs, and has run large post-layout cases with more than 120-million elements. According to Dolphin Technology, a leading provider of high-performance Semiconductor Intellectual Property (IP), NanoSpice Giga efficiently handles cases like this with a pure SPICE engine that delivers outstanding performance.

Dolphin Technology selected NanoSpice Giga for its ability to handle large-scale designs with a pure SPICE engine that eliminated the concern for inaccuracy. Additionally, Dolphin Technology, after an extensive evaluation of numerous simulator options, determined NanoSpice Giga was easy to use and required no complicated option settings and tuning.

"ProPlus and NanoSpice Giga surpassed our expectations," notes Mo Tamjidi, chief executive officer (CEO) of Dolphin Technology. "Our designs are large and complex, and moving to advanced nodes like 16nm FinFET requires high simulation accuracy. We need a tool such as NanoSpice Giga to efficiently and accurately characterize and verify them."

In addition, ProPlus, the leading technology provider of giga-scale parallel SPICE simulation, SPICE modeling solutions and Design-for-Yield (DFY) applications, and Dolphin Technology have established a long-term alliance to further boost NanoSpice's performance and capacity for faster simulation and larger circuits, such as NanoSpice Giga's ability to handle more than one-billion elements.

"Dolphin Technology pushed the boundaries with NanoSpice Giga to ensure accuracy, reliability and high performance for design characterization and verification," says Dr. Zhihong Liu, executive chairman and CEO of ProPlus Design Solutions. "With NanoSpice Giga's billion-element capacity and fast performance, designers now have new options when selecting a SPICE simulator. We're delighted to have an opportunity to team up with a leading-edge engineering organization like Dolphin Technology."

ProPlus at DAC

ProPlus will demonstrate NanoSpice Giga and its FinFET-ready DFY products for nano-scale SPICE modeling and giga-scale SPICE simulation at the 51st Design Automation Conference (DAC) in Booth #905. DAC will be held Monday, June 2, through Wednesday, June 4, from 9 a.m. until 6 p.m. at the Moscone Center in San Francisco. To schedule a meeting or demonstration, send email to: [email protected].

More information about DAC is available at: www.dac.com.

About ProPlus Design Solutions

ProPlus Design Solutions, Inc. (www.proplussolutions.com) delivers Electronic Design Automation (EDA) solutions with the mission to enhance the link between design and manufacturing. It is the global leader for SPICE modeling solutions and the leading technology provider for unique Design-for-Yield (DFY) products that integrate the key DFY components --advanced device modeling software, a parallel SPICE simulation circuit simulator and hardware-validated statistical variation analysis tools. Products include: BSIMProPlus™/Model Explorer™, a modeling technology platform for nanometer devices; NoisePro™/9812B/9812D, the golden solution for low-frequency 1/f noise and Random Telegraph Signal (RTS) noise characterization and process monitoring; NanoSpice™, a high-capacity, high-performance parallel SPICE simulator for giga-scale circuit simulation; and NanoYield™/NanoExplorer™, a variation analysis platform for yield versus power, performance and area trade-off of memory, analog and digital circuit designs. ProPlus Design Solutions has R&D centers in the San Jose, Calif. and Beijing and Jinan, China, with sales offices in Tokyo, Japan, Hsinchu, Taiwan, and Shanghai, China. More information about ProPlus Design Solutions can be found at www.proplussolutions.com.

BSIMProPlus, Model Explorer, NanoExplorer, NanoSpice, NanoYield and NoisePro are registered trademarks of ProPlus Design Solutions. ProPlus Design Solutions acknowledges trademarks or registered trademarks of other organizations for their respective products and services.

For more information, contact:
Nanette Collins
Public Relations for ProPlus Design Solutions
(617) 437-1822
Email Contact

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
"We build IoT infrastructure products - when you have to integrate different devices, different systems and cloud you have to build an application to do that but we eliminate the need to build an application. Our products can integrate any device, any system, any cloud regardless of protocol," explained Peter Jung, Chief Product Officer at Pulzze Systems, in this SYS-CON.tv interview at @ThingsExpo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
When it comes to cloud computing, the ability to turn massive amounts of compute cores on and off on demand sounds attractive to IT staff, who need to manage peaks and valleys in user activity. With cloud bursting, the majority of the data can stay on premises while tapping into compute from public cloud providers, reducing risk and minimizing need to move large files. In his session at 18th Cloud Expo, Scott Jeschonek, Director of Product Management at Avere Systems, discussed the IT and busin...
Between 2005 and 2020, data volumes will grow by a factor of 300 – enough data to stack CDs from the earth to the moon 162 times. This has come to be known as the ‘big data’ phenomenon. Unfortunately, traditional approaches to handling, storing and analyzing data aren’t adequate at this scale: they’re too costly, slow and physically cumbersome to keep up. Fortunately, in response a new breed of technology has emerged that is cheaper, faster and more scalable. Yet, in meeting these new needs they...
The cloud promises new levels of agility and cost-savings for Big Data, data warehousing and analytics. But it’s challenging to understand all the options – from IaaS and PaaS to newer services like HaaS (Hadoop as a Service) and BDaaS (Big Data as a Service). In her session at @BigDataExpo at @ThingsExpo, Hannah Smalltree, a director at Cazena, provided an educational overview of emerging “as-a-service” options for Big Data in the cloud. This is critical background for IT and data professionals...
"Once customers get a year into their IoT deployments, they start to realize that they may have been shortsighted in the ways they built out their deployment and the key thing I see a lot of people looking at is - how can I take equipment data, pull it back in an IoT solution and show it in a dashboard," stated Dave McCarthy, Director of Products at Bsquare Corporation, in this SYS-CON.tv interview at @ThingsExpo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
@DevOpsSummit taking place June 6-8, 2017 at Javits Center, New York City, is co-located with the 20th International Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world. @DevOpsSummit at Cloud Expo New York Call for Papers is now open.
Fact is, enterprises have significant legacy voice infrastructure that’s costly to replace with pure IP solutions. How can we bring this analog infrastructure into our shiny new cloud applications? There are proven methods to bind both legacy voice applications and traditional PSTN audio into cloud-based applications and services at a carrier scale. Some of the most successful implementations leverage WebRTC, WebSockets, SIP and other open source technologies. In his session at @ThingsExpo, Da...
In his session at 19th Cloud Expo, Claude Remillard, Principal Program Manager in Developer Division at Microsoft, contrasted how his team used config as code and immutable patterns for continuous delivery of microservices and apps to the cloud. He showed how the immutable patterns helps developers do away with most of the complexity of config as code-enabling scenarios such as rollback, zero downtime upgrades with far greater simplicity. He also demoed building immutable pipelines in the cloud ...
The cloud competition for database hosts is fierce. How do you evaluate a cloud provider for your database platform? In his session at 18th Cloud Expo, Chris Presley, a Solutions Architect at Pythian, gave users a checklist of considerations when choosing a provider. Chris Presley is a Solutions Architect at Pythian. He loves order – making him a premier Microsoft SQL Server expert. Not only has he programmed and administered SQL Server, but he has also shared his expertise and passion with b...
As data explodes in quantity, importance and from new sources, the need for managing and protecting data residing across physical, virtual, and cloud environments grow with it. Managing data includes protecting it, indexing and classifying it for true, long-term management, compliance and E-Discovery. Commvault can ensure this with a single pane of glass solution – whether in a private cloud, a Service Provider delivered public cloud or a hybrid cloud environment – across the heterogeneous enter...
"IoT is going to be a huge industry with a lot of value for end users, for industries, for consumers, for manufacturers. How can we use cloud to effectively manage IoT applications," stated Ian Khan, Innovation & Marketing Manager at Solgeniakhela, in this SYS-CON.tv interview at @ThingsExpo, held November 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA.
Today we can collect lots and lots of performance data. We build beautiful dashboards and even have fancy query languages to access and transform the data. Still performance data is a secret language only a couple of people understand. The more business becomes digital the more stakeholders are interested in this data including how it relates to business. Some of these people have never used a monitoring tool before. They have a question on their mind like “How is my application doing” but no id...
@GonzalezCarmen has been ranked the Number One Influencer and @ThingsExpo has been named the Number One Brand in the “M2M 2016: Top 100 Influencers and Brands” by Onalytica. Onalytica analyzed tweets over the last 6 months mentioning the keywords M2M OR “Machine to Machine.” They then identified the top 100 most influential brands and individuals leading the discussion on Twitter.
In IT, we sometimes coin terms for things before we know exactly what they are and how they’ll be used. The resulting terms may capture a common set of aspirations and goals – as “cloud” did broadly for on-demand, self-service, and flexible computing. But such a term can also lump together diverse and even competing practices, technologies, and priorities to the point where important distinctions are glossed over and lost.
Predictive analytics tools monitor, report, and troubleshoot in order to make proactive decisions about the health, performance, and utilization of storage. Most enterprises combine cloud and on-premise storage, resulting in blended environments of physical, virtual, cloud, and other platforms, which justifies more sophisticated storage analytics. In his session at 18th Cloud Expo, Peter McCallum, Vice President of Datacenter Solutions at FalconStor, discussed using predictive analytics to mon...