|By Marketwired .||
|May 29, 2014 06:30 AM EDT||
VANCOUVER, BRITISH COLUMBIA -- (Marketwired) -- 05/29/14 -- Alderon Iron Ore Corp. (TSX:ADV)(NYSE MKT:AXX) ("Alderon" or the "Company") is pleased to announce that it has appointed Mr. Ian R. Ashby, former President, Iron Ore of BHP Billiton Limited ("BHP Billiton") and Mr. W. Adrian Loader, former President and CEO of Shell Canada to the Board of Directors effective immediately.
"We are thrilled to be adding the expertise of both Ian and Adrian to our board at such a crucial time in the Company's development," says Mark Morabito, Executive Chairman of Alderon. "As we continue to gear up to commence construction later this year, the experience of both these new board members will be invaluable."
Mr. Ashby worked 25 years for BHP Billiton, the world's largest diversified resource company. During his time with BHP Billiton, Mr. Ashby held many senior roles including Chief Operating Officer, Base Metals, Chief Operating Officer, Western Australia Iron Ore and lastly President, Iron Ore from 2006 to 2012. As President, Iron Ore, Mr. Ashby was responsible for global strategy development and execution, and operations and project development for the Iron Ore business. He was accountable for the largest and most profitable business within BHP Billiton and was instrumental in expanding the business to almost twice its capacity during his tenure. Mr. Ashby holds a Bachelor of Engineering in Mining from the University of Melbourne, Australia.
Mr. Loader spent 20 years working for Shell, including most recently as President and CEO of Shell Canada. Prior to this role, he was Director of Strategy and Business Development and Director of Strategic Planning, External Affairs, HSE and Sustainable Development for the Royal Dutch Shell Group ("Shell"). During his time with Shell, Mr. Loader led the merger and acquisition activity and was responsible for strategic direction, scenarios, competitive intelligence and planning. Mr. Loader graduated from the University of Cambridge with a MA and sits on the board of several other resource companies.
Stepping aside from the Board at this time will be Mr. Matt Simpson. Mr. Simpson has been involved with Alderon for almost 4 years and has made many valuable contributions to Alderon's development. The Board would like to acknowledge and thank Mr. Simpson for his exemplary service.
Alderon is also pleased to announce that it has received Toronto Stock Exchange ("TSX") approval to hold its annual general meeting ("AGM") on July 29, 2014, outside of the TSX requirement that a company hold an AGM within six months of its year end. Alderon is evaluating several transactions that may require shareholder approval and chose to delay the holding of its AGM rather than holding multiple shareholder meetings in short succession.
Alderon is a leading iron ore development company in Canada with offices in Montreal, Vancouver, St. John's and Labrador City. The Kami Project, owned 75% by Alderon and 25% by Hebei Iron & Steel Group Co. Ltd. ("HBIS") through The Kami Mine Limited Partnership, is located within Canada's premier iron ore district and is surrounded by four producing iron ore mines. Its port handling facilities are located in Sept-Iles, the leading iron ore port in North America. The Alderon team is comprised of skilled professionals with significant iron ore expertise to advance Kami towards production. HBIS is Alderon's strategic partner in the development of the Kami Project and China's largest steel producer.
For more information on Alderon, please visit our website at www.alderonironore.com.
ALDERON IRON ORE CORP.
On behalf of the Board
Mark J Morabito, Executive Chairman
Cautionary Note Regarding Forward-Looking Information
This press release contains "forward-looking information" within the meaning of the U.S. Private Securities Litigation Reform Act and Canadian securities laws concerning anticipated developments and events that may occur in the future. Forward-looking information contained in this press release include, but are not limited to, statements with respect to (i) the development of the Kami Project; (ii) the commencement of construction at the Kami Project; and (iii) potential transactions that Alderon is evaluating that may require shareholder approval.
In certain cases, forward-looking information can be identified by the use of words such as "plans", "expects" or "does not expect", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates" or "does not anticipate", or "believes", or variations of such words and phrases or state that certain actions, events or results "may", "could", "would", "might" or "will be taken", "occur" or "be achieved" suggesting future outcomes, or other expectations, beliefs, plans, objectives, assumptions, intentions or statements about future events or performance. Forward-looking information contained in this press release is based on certain factors and assumptions regarding, among other things, receipt of governmental and other approvals, the estimation of mineral reserves and resources, the realization of resource estimates, iron ore and other metal prices, the timing and amount of future exploration and development expenditures, the estimation of initial and sustaining capital requirements, the estimation of labour and operating costs, the availability of necessary financing and materials to continue to explore and develop the Kami Project in the short and long-term, the progress of exploration and development activities, the receipt of necessary regulatory approvals, the estimation of insurance coverage, and assumptions with respect to currency fluctuations, environmental risks, title disputes or claims, and other similar matters. While the Company considers these assumptions to be reasonable based on information currently available to it, they may prove to be incorrect.
Forward-looking information involves known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements of the Company to be materially different from any future results, performance or achievements expressed or implied by the forward-looking information. Such factors include risks inherent in the exploration and development of mineral deposits, including risks relating to changes in project parameters as plans continue to be redefined including the possibility that mining operations may not commence at the Kami Project, risks relating to variations in mineral resources, grade or recovery rates resulting from current exploration and development activities, risks relating to the ability to access rail transportation, sources of power and port facilities, risks relating to changes in iron ore prices and the worldwide demand for and supply of iron ore and related products, risks related to increased competition in the market for iron ore and related products and in the mining industry generally, risks related to current global financial conditions, uncertainties inherent in the estimation of mineral resources, access and supply risks, reliance on key personnel, operational risks inherent in the conduct of mining activities, including the risk of accidents, labour disputes, increases in capital and operating costs and the risk of delays or increased costs that might be encountered during the development process, regulatory risks, including risks relating to the acquisition of the necessary licences and permits, financing, capitalization and liquidity risks, including the risk that the financing necessary to fund the exploration and development activities at the Kami Project may not be available on satisfactory terms, or at all, risks related to disputes concerning property titles and interest, risks related to disputes with Aboriginal groups, environmental risks, and the additional risks identified in the "Risk Factors" section of the Company's Annual Information Form for the most recently completed financial year, which is included in its Annual Report on Form 40-F filed with the U.S. Securities and Exchange Commission (the "SEC") or other reports and filings with applicable Canadian securities regulators and the SEC. Accordingly, readers should not place undue reliance on forward-looking information. The forward-looking information is made as of the date of this press release. Except as required by applicable securities laws, the Company does not undertake any obligation to publicly update or revise any forward-looking information.
The IoT is changing the way enterprises conduct business. In his session at @ThingsExpo, Eric Hoffman, Vice President at EastBanc Technologies, discussed how businesses can gain an edge over competitors by empowering consumers to take control through IoT. He cited examples such as a Washington, D.C.-based sports club that leveraged IoT and the cloud to develop a comprehensive booking system. He also highlighted how IoT can revitalize and restore outdated business models, making them profitable ...
Jul. 23, 2016 07:15 PM EDT Reads: 1,855
We all know the latest numbers: Gartner, Inc. forecasts that 6.4 billion connected things will be in use worldwide in 2016, up 30 percent from last year, and will reach 20.8 billion by 2020. We're rapidly approaching a data production of 40 zettabytes a day – more than we can every physically store, and exabytes and yottabytes are just around the corner. For many that’s a good sign, as data has been proven to equal money – IF it’s ingested, integrated, and analyzed fast enough. Without real-ti...
Jul. 23, 2016 07:00 PM EDT Reads: 809
"We view the cloud not really as a specific technology but as a way of doing business and that way of doing business is transforming the way software, infrastructure and services are being delivered to business," explained Matthew Rosen, CEO and Director at Fusion, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Jul. 23, 2016 07:00 PM EDT Reads: 1,410
"Software-defined storage is a big problem in this industry because so many people have different definitions as they see fit to use it," stated Peter McCallum, VP of Datacenter Solutions at FalconStor Software, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Jul. 23, 2016 06:30 PM EDT Reads: 1,331
I wanted to gather all of my Internet of Things (IOT) blogs into a single blog (that I could later use with my University of San Francisco (USF) Big Data “MBA” course). However as I started to pull these blogs together, I realized that my IOT discussion lacked a vision; it lacked an end point towards which an organization could drive their IOT envisioning, proof of value, app dev, data engineering and data science efforts. And I think that the IOT end point is really quite simple…
Jul. 23, 2016 06:15 PM EDT Reads: 765
With 15% of enterprises adopting a hybrid IT strategy, you need to set a plan to integrate hybrid cloud throughout your infrastructure. In his session at 18th Cloud Expo, Steven Dreher, Director of Solutions Architecture at Green House Data, discussed how to plan for shifting resource requirements, overcome challenges, and implement hybrid IT alongside your existing data center assets. Highlights included anticipating workload, cost and resource calculations, integrating services on both sides...
Jul. 23, 2016 06:00 PM EDT Reads: 1,858
"We are a well-established player in the application life cycle management market and we also have a very strong version control product," stated Flint Brenton, CEO of CollabNet,, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Jul. 23, 2016 05:30 PM EDT Reads: 1,703
"We provide DevOps solutions. We also partner with some key players in the DevOps space and we use the technology that we partner with to engineer custom solutions for different organizations," stated Himanshu Chhetri, CTO of Addteq, in this SYS-CON.tv interview at DevOps at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Jul. 23, 2016 05:30 PM EDT Reads: 1,527
In his session at @DevOpsSummit at 19th Cloud Expo, Yoseph Reuveni, Director of Software Engineering at Jet.com, will discuss Jet.com's journey into containerizing Microsoft-based technologies like C# and F# into Docker. He will talk about lessons learned and challenges faced, the Mono framework tryout and how they deployed everything into Azure cloud. Yoseph Reuveni is a technology leader with unique experience developing and running high throughput (over 1M tps) distributed systems with extre...
Jul. 23, 2016 05:30 PM EDT Reads: 1,968
Actian Corporation has announced the latest version of the Actian Vector in Hadoop (VectorH) database, generally available at the end of July. VectorH is based on the same query engine that powers Actian Vector, which recently doubled the TPC-H benchmark record for non-clustered systems at the 3000GB scale factor (see tpc.org/3323). The ability to easily ingest information from different data sources and rapidly develop queries to make better business decisions is becoming increasingly importan...
Jul. 23, 2016 05:15 PM EDT Reads: 646
The IoT has the potential to create a renaissance of manufacturing in the US and elsewhere. In his session at 18th Cloud Expo, Florent Solt, CTO and chief architect of Netvibes, discussed how the expected exponential increase in the amount of data that will be processed, transported, stored, and accessed means there will be a huge demand for smart technologies to deliver it. Florent Solt is the CTO and chief architect of Netvibes. Prior to joining Netvibes in 2007, he co-founded Rift Technologi...
Jul. 23, 2016 05:00 PM EDT Reads: 931
"Operations is sort of the maturation of cloud utilization and the move to the cloud," explained Steve Anderson, Product Manager for BMC’s Cloud Lifecycle Management, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Jul. 23, 2016 05:00 PM EDT Reads: 1,779
Enterprise networks are complex. Moreover, they were designed and deployed to meet a specific set of business requirements at a specific point in time. But, the adoption of cloud services, new business applications and intensifying security policies, among other factors, require IT organizations to continuously deploy configuration changes. Therefore, enterprises are looking for better ways to automate the management of their networks while still leveraging existing capabilities, optimizing perf...
Jul. 23, 2016 04:45 PM EDT Reads: 895
Security, data privacy, reliability and regulatory compliance are critical factors when evaluating whether to move business applications from in-house client hosted environments to a cloud platform. In her session at 18th Cloud Expo, Vandana Viswanathan, Associate Director at Cognizant, In this session, will provide an orientation to the five stages required to implement a cloud hosted solution validation strategy.
Jul. 23, 2016 04:30 PM EDT Reads: 668
The cloud competition for database hosts is fierce. How do you evaluate a cloud provider for your database platform? In his session at 18th Cloud Expo, Chris Presley, a Solutions Architect at Pythian, gave users a checklist of considerations when choosing a provider. Chris Presley is a Solutions Architect at Pythian. He loves order – making him a premier Microsoft SQL Server expert. Not only has he programmed and administered SQL Server, but he has also shared his expertise and passion with b...
Jul. 23, 2016 04:00 PM EDT Reads: 1,805