Click here to close now.




















Welcome!

News Feed Item

Riverside Resources and Partner Morro Bay Resources Drill 388.4 g/t Silver Over 22.7 Metres at the Penoles Gold-Silver Project in Durango, Mexico

VANCOUVER, BRITISH COLUMBIA -- (Marketwired) -- 06/09/14 -- Riverside Resources Inc. ("Riverside" or the "Company") (TSX VENTURE:RRI)(PINKSHEETS:RVSDF)(FRANKFURT:R99), is pleased to announce new drill results from the Jesus Maria Silver Mine area at the Penoles Project (the "Project") in Durango, Mexico, which is being funded by Morro Bay Resources. Twenty three (23) HQ sized core holes were drilled on the property, for a total of 2,143 metres during the most recent drill program with results still pending for 6 holes. The recent program discovered a new zone of mineralization and structural preparation (referred to as the "Jesus Maria South Zone") intersecting and trending southwest from the Jesus Maria Vein. The Jesus Maria South Zone had not been systematically tested and apparently never worked by previous mining. The first two drill holes that intersected the new zone, (JM DDH 14-10 and JM DDH 14-24) returned the best near surface intervals of silver mineralization intersected at the Penoles Property since Riverside acquired the property in 2007.

The first hole drilled (JM DDH 14-10) was a 30 metre step out, south from the final hole (JM DDH 13-9 "Hole 9") of the 2013 program (view www.rivres.com for maps and images). This drill hole, (JM DDH 14-10) intersected an approximately 41 metre wide near-surface mineralized interval averaging 123.9 g/t silver and more than 0.5 g/t gold, including a 4.25 metre interval that assayed 732.2 g/t silver and 1.20 g/t gold. The second hole, JM DDH 14-24, confirmed significant widths of mineralization, with 70.8 m interval averaging 147.8 g/t silver including a 22.7 m interval that returned 388.4 g/t silver.

Assay results for the drill holes received to date from the Jesus Maria South Zone, JM DDH 14-10 and JM DDH 14-24, are summarized below:


----------------------------------------------------------------------------
                                Interval                                    
Hole ID      From (m)   To (m)       (m) Au (ppm) Ag (ppm)   Pb (%)   Zn (%)
----------------------------------------------------------------------------
JM DDH 14-10     18.9     59.5     40.60    0.540    123.9     0.07     0.14
----------------------------------------------------------------------------
                 Including          4.25    1.201    732.2     0.13     0.35
----------------------------------------------------------------------------
                 Including          2.30    1.291    194.8     0.42     0.31
----------------------------------------------------------------------------
                 Including          6.70    1.082    122.9     0.05     0.12
----------------------------------------------------------------------------
JM DDH 14-24    52.65   123.45     70.80     0.37    147.8     0.03     0.08
----------------------------------------------------------------------------
                 Including         22.70    0.629    388.4     0.07     0.12
----------------------------------------------------------------------------
                 Including          5.45    1.474    144.2     0.11     0.06
----------------------------------------------------------------------------

(All reported intervals are core lengths, true widths have not yet been determined)

Six additional holes (JM DDH 14-25 through JM DDH 14-30) have been drilled to investigate the potential continuity of mineralization at Jesus Maria South Zone to the east of the JM DDH 14-24 location. Assay results for these six holes will be released as soon as they become available and have been interpreted.

Riverside's President and CEO, John-Mark Staude stated, "Riverside is pleased with the drilling and discovery of the Jesus Maria South Zone and looks forward to receiving further assays from the remaining six holes. Collectively this zone so far has a strike extent of drilling of over 250 meters. The expanded mineralization found at Jesus Maria combined with the Capitan Gold Zone, untested San Rafael Mine area and numerous other prospective targets provide plenty of upside as the Penoles Project continues to move forward."

Other assayed holes from the current campaign include drill holes JM DDH 14-11 through JM DDH 14-23, a series of vertical and inclined holes spaced at approximately 50 to 100 metre intervals along the Jesus Maria Vein which provide near surface extension to the shallow mined area. The Jesus Maria Vein holes (view www.rivres.com for maps) were designed to test for potential lateral extensions of the mineralized zone developed in the historical Jesus Maria mine region and to some extent began to extend the depth which remains wide open. The drilling successfully extended the confirmed strike length of the Jesus Maria Vein approximately 500 meters westwards, and intersected the vein at the expected depths, showing good continuity. The vein remains open at depth and along strike. The drill holes encountered encouraging mineralization zones as tabulated below. These results are currently being integrated into the Jesus Maria geological model, and will be commented on in more detail as the analysis is completed.


----------------------------------------------------------------------------
                                Interval                                    
Hole ID      From (m)   To (m)       (m) Au (ppm) Ag (ppm)   Pb (%)   Zn (%)
----------------------------------------------------------------------------
JM DDH 14-11    81.30    93.30     12.00    0.284     42.6     0.61     1.13
----------------------------------------------------------------------------
JM DDH 14-12         Hole was abandoned before reaching target depth        
----------------------------------------------------------------------------
JM DDH 14-13   100.90   113.30     12.40    0.226     55.9     0.04     0.11
----------------------------------------------------------------------------
and            146.30   157.80     11.50    0.280     36.7     0.16     0.34
----------------------------------------------------------------------------
JM DDH 14-14    41.00    58.65     17.65    0.122    123.3     0.94     0.78
----------------------------------------------------------------------------
JM DDH 14-15    29.00    36.05      7.05    0.233     34.7     0.53     0.57
----------------------------------------------------------------------------
JM DDH 14-16    36.05    38.40      2.35    0.187     53.9     1.16     1.02
----------------------------------------------------------------------------
JM DDH 14-17    74.50    76.80      2.30    0.149     56.6     2.22     1.76
----------------------------------------------------------------------------
JM DDH 14-18     56.3     60.8      4.50    0.064     50.9     0.78     0.72
----------------------------------------------------------------------------
JM DDH 14-19        Did not encounter any significant mineralization        
----------------------------------------------------------------------------
JM DDH 14-20        Did not encounter any significant mineralization        
----------------------------------------------------------------------------
JM DDH 14-21    37.95    39.85      1.90    0.254    251.4     0.01     0.02
----------------------------------------------------------------------------
and            113.20   129.35     16.15    0.100     39.4     0.25     0.38
----------------------------------------------------------------------------
JM DDH 14-22     28.9    59.55     30.65    0.178     41.4     0.03     0.11
----------------------------------------------------------------------------
                 Including          2.25    0.128    179.2     0.09     0.16
----------------------------------------------------------------------------
                 Including          2.95    0.938    138.4     0.14     0.29
----------------------------------------------------------------------------
And             70.45    93.05     22.60    0.346     26.4     0.40     0.61
----------------------------------------------------------------------------
JM DDH 14-23     25.3     56.5     31.20    0.112     55.7     0.17     0.33
----------------------------------------------------------------------------

(All reported intervals are core lengths, true widths have not yet been determined)

Two drill holes (CDDH-14-49 and CDDH-14-50) were designed to test the Capitan Hill Zone target but were terminated early without reaching target depth due to local ground conditions and were not submitted for assay.

Results of previous drill programs completed at the Penoles Project are summarized in a recent N.I. 43-101 completed by Morro Bay Resources filed on SEDAR (www.sedar.com).

About the Penoles Project:

The Penoles Project is located in the Durango silver-gold belt in north-central Mexico and is currently owned 100% by Riverside. The recently completed drill program was conducted pursuant to a commitment by Morro Bay Resources Ltd. ("Morro Bay") to perform $750,000 of exploration work on the property during the first part of 2014. Morro Bay can complete its option to earn an initial 51-per-cent interest in the property by paying USD$1.35-million in cash to Riverside and paying USD$1.5-million worth of Morro Bay shares by June 30, 2014. For more information see Riverside press release dated January 23, 2014.

There are approximately eleven targets on the Penoles Project, including the Capitan Gold Zone, the Pinchanzo Zone (see Riverside press release dated May 23, 2012), potential west extensions of El Capitan (referred to as the West Extension), a new target area located to the northwest of El Capitan (referred to as Santa Theresa) and the previously mined Jesus Maria and San Rafael Ag- Au-Pb-Zn mines. The district is highly prospective with active mining operations nearby and has proven to be a cost effective region where projects can be efficiently developed towards production.

The Capitan Gold Zone is an advanced epithermal prospect with 45 drill holes and 6,945 metres of total drilling so far, with geological work to-date indicating potential for a bulk tonnage gold style system at El Capitan, with the geologic interpretation indicating vectors for expansion with further drilling.

The 23 drill holes and 2,143 metres of recently completed drilling bring the aggregate drill figures to 31 drill holes over 3,000 metres at Jesus Maria. The 2013 drilling intercepted a semi-parallel sequence of upper silver-carbonate veining as well as the main quartz-rich Ag-Au-Pb-Zn Jesus Maria vein zone. Underground exploration and sampling of the old workings also found silver bearing carbonate veins, which prior to this recent work was not known and demonstrates larger potential for the Jesus Maria vein system than previously recognized. The 2014 drilling has encountered some of the widest and strongest silver mineralization to-date and builds on previous work with significant exploration upside still remaining at Jesus Maria and surrounding targets.

Qualified Person and QA/QC:

The scientific and technical data contained in this news release pertaining to the Penoles Project was reviewed by Howard Davies, MAIG - VP Exploration, a non-independent qualified person to Riverside Resources, who is responsible for ensuring that the geologic information provided in this news release is accurate and who acts as a "qualified person" under National Instrument 43-101 Standards of Disclosure for Mineral Projects.

According to Morro Bay, all drill cores were placed in numbered boxes and transported to Morro Bay's secure core facilities by the drill contractor. Following detailed core logging all core was cut using a diamond bladed core saw under the direct supervision of Morro Bay's geologic staff with half of the core kept on site in the original core boxes. All drill samples were sealed in numbered plastic bags and transported to Inspectorate America Assay labs facility in Durango City for prep work and analyzed at their facilities in Reno, NV, USA. Inspectorate America is certified for the provision of assays and geochemical analysis (ISO:9001-2008). All samples were prepared using standard industry preparation methods followed by fire assay analysis and aqua regia digest for trace elements. All samples with greater than 10 g/t Au or 100 g/t silver were additionally tested by fire assay with a gravimetric finish. Morro Bay has included appropriate industry certified standards and blanks within the drill core sample stream in addition to the standards and duplicates included as part of the Inspectorate QA/QC program.

About Riverside Resources Inc.:

Riverside is a well-funded prospect generation team of focused, proactive precious and base metal discoverers with the breadth of knowledge to dig much deeper. The Company currently has more than $4,500,000 in the treasury and approximately 37,000,000 shares outstanding. The Company's model of growth through partnerships and exploration uses the prospect generation business approach to own resources, while partners share in de-risking projects en route to discovery. Riverside has additional properties available for option with more information available on the Company's website at www.rivres.com.

ON BEHALF OF RIVERSIDE RESOURCES INC.

Dr. John-Mark Staude, President & CEO

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
With the proliferation of connected devices underpinning new Internet of Things systems, Brandon Schulz, Director of Luxoft IoT – Retail, will be looking at the transformation of the retail customer experience in brick and mortar stores in his session at @ThingsExpo. Questions he will address include: Will beacons drop to the wayside like QR codes, or be a proximity-based profit driver? How will the customer experience change in stores of all types when everything can be instrumented and a...
Contrary to mainstream media attention, the multiple possibilities of how consumer IoT will transform our everyday lives aren’t the only angle of this headline-gaining trend. There’s a huge opportunity for “industrial IoT” and “Smart Cities” to impact the world in the same capacity – especially during critical situations. For example, a community water dam that needs to release water can leverage embedded critical communications logic to alert the appropriate individuals, on the right device, as...
Manufacturing connected IoT versions of traditional products requires more than multiple deep technology skills. It also requires a shift in mindset, to realize that connected, sensor-enabled “things” act more like services than what we usually think of as products. In his session at @ThingsExpo, David Friedman, CEO and co-founder of Ayla Networks, will discuss how when sensors start generating detailed real-world data about products and how they’re being used, smart manufacturers can use the ...
WebRTC services have already permeated corporate communications in the form of videoconferencing solutions. However, WebRTC has the potential of going beyond and catalyzing a new class of services providing more than calls with capabilities such as mass-scale real-time media broadcasting, enriched and augmented video, person-to-machine and machine-to-machine communications. In his session at @ThingsExpo, Luis Lopez, CEO of Kurento, will introduce the technologies required for implementing thes...
Organizations from small to large are increasingly adopting cloud solutions to deliver essential business services at a much lower cost. According to cyber security experts, the frequency and severity of cyber-attacks are on the rise, causing alarm to businesses and customers across a variety of industries. To defend against exploits like these, a company must adopt a comprehensive security defense strategy that is designed for their business. In 2015, organizations such as United Airlines, Sony...
SYS-CON Events announced today that HPM Networks will exhibit at the 17th International Cloud Expo®, which will take place on November 3–5, 2015, at the Santa Clara Convention Center in Santa Clara, CA. For 20 years, HPM Networks has been integrating technology solutions that solve complex business challenges. HPM Networks has designed solutions for both SMB and enterprise customers throughout the San Francisco Bay Area.
Any Ops team trying to support a company in today’s cloud-connected world knows that a new way of thinking is required – one just as dramatic than the shift from Ops to DevOps. The diversity of modern operations requires teams to focus their impact on breadth vs. depth. In his session at DevOps Summit, Adam Serediuk, Director of Operations at xMatters, Inc., will discuss the strategic requirements of evolving from Ops to DevOps, and why modern Operations has begun leveraging the “NoOps” approa...
While many app developers are comfortable building apps for the smartphone, there is a whole new world out there. In his session at @ThingsExpo, Narayan Sainaney, Co-founder and CTO of Mojio, will discuss how the business case for connected car apps is growing and, with open platform companies having already done the heavy lifting, there really is no barrier to entry.
To assist customers with legacy Windows Server 2003 that is no longer supported by Microsoft, Racemi has introduced fixed price packages for upgrading and migrating Windows Server 2003 servers to either Windows 2008 R2 or Windows 2012 R2 and the choice of Amazon Web Services (AWS) or SoftLayer cloud. "We're extending a lifeline by upgrading the legacy servers to more modern Windows Server platforms while taking advantage of cloud computing," said James Strayer, vice president of product managem...
All major researchers estimate there will be tens of billions devices - computers, smartphones, tablets, and sensors - connected to the Internet by 2020. This number will continue to grow at a rapid pace for the next several decades. With major technology companies and startups seriously embracing IoT strategies, now is the perfect time to attend @ThingsExpo, November 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA. Learn what is going on, contribute to the discussions, and e...
As more intelligent IoT applications shift into gear, they’re merging into the ever-increasing traffic flow of the Internet. It won’t be long before we experience bottlenecks, as IoT traffic peaks during rush hours. Organizations that are unprepared will find themselves by the side of the road unable to cross back into the fast lane. As billions of new devices begin to communicate and exchange data – will your infrastructure be scalable enough to handle this new interconnected world?
In today's digital world, change is the one constant. Disruptive innovations like cloud, mobility, social media, and the Internet of Things have reshaped the market and set new standards in customer expectations. To remain competitive, businesses must tap the potential of emerging technologies and markets through the rapid release of new products and services. However, the rigid and siloed structures of traditional IT platforms and processes are slowing them down – resulting in lengthy delivery ...
The Internet of Things is in the early stages of mainstream deployment but it promises to unlock value and rapidly transform how organizations manage, operationalize, and monetize their assets. IoT is a complex structure of hardware, sensors, applications, analytics and devices that need to be able to communicate geographically and across all functions. Once the data is collected from numerous endpoints, the challenge then becomes converting it into actionable insight.
SYS-CON Events announced today that Micron Technology, Inc., a global leader in advanced semiconductor systems, will exhibit at the 17th International Cloud Expo®, which will take place on November 3–5, 2015, at the Santa Clara Convention Center in Santa Clara, CA. Micron’s broad portfolio of high-performance memory technologies – including DRAM, NAND and NOR Flash – is the basis for solid state drives, modules, multichip packages and other system solutions. Backed by more than 35 years of tech...
With the Apple Watch making its way onto wrists all over the world, it’s only a matter of time before it becomes a staple in the workplace. In fact, Forrester reported that 68 percent of technology and business decision-makers characterize wearables as a top priority for 2015. Recognizing their business value early on, FinancialForce.com was the first to bring ERP to wearables, helping streamline communication across front and back office functions. In his session at @ThingsExpo, Kevin Roberts...