Welcome!

News Feed Item

Canacol Closes Strategic Acquisition of Additional Interest in LLA23 and Tests 2,898 BOPD From Labrador 4 and Leono 3 Wells

CALGARY, ALBERTA -- (Marketwired) -- 06/18/14 -- Canacol Energy Ltd. ("Canacol" or the "Corporation") (TSX: CNE)(OTCQX: CNNEF)(BVC: CNEC) is pleased to provide the following update concerning the strategic acquisition of an additional 10% working interest from Petromont Colombia S.A. Sucursal Colombia ("Petromont") in its LLA23 Exploration and Production contract located in the Llanos basin and the production test results of the Labrador 4 and Leono 3 wells also located on the LLA23 contract, which tested at a gross combined rate of 2,898 barrels of light oil per day ("bopd") (2,608 bopd net). The Corporation now has a 90% operated working interest in the LLA23 contract, with Petromont holding the remaining 10% interest. Elsewhere on the LLA23 contract the Corporation is currently rigging up on the Maltes 1 exploration well and the Pantro 2 appraisal well, and is about to commence the shooting of 400 square kilometers of 3D seismic data. As a result of the acquisition the Corporation is revising its production guidance from 12,500 to 13,500 boepd net before royalty to 13,000 to 14,000 boepd net before royalty for calendar 2014 with an anticipated exit rate for December 2014 of approximately 18,000 boepd.

Charle Gamba, President and CEO of the Corporation, commented, "This strategic acquisition has consolidated our interest in our main oil producing asset at LLA23, which accounts for approximately half of the Corporation's current 13,800 boepd of net production before royalties. With a 100% drilling success rate for both exploration and production wells to date, including the recently drilled Leono 3 and Labrador 4 wells, this strategic consolidation of interest allows us to capture almost all of the upside associated with this contract over the next several years, all now at a 90% operated working interest. We plan to drill 3 exploration wells and 7 additional development and appraisal wells during the remainder of calendar 2014, and are currently rigging up on the Maltes 1 exploration well and the Pantro 2 appraisal well. The Corporation is also about to commence shooting 400 sq km of 3D seismic data which will set up our exploration drilling programs for 2015 and 2016 on this important block."

Acquisition of 10% interest in the LLA23 contract (90% operated working interest)

Effective as of June 1, 2014, the Corporation has acquired an additional 10% working interest in the LLA 23 contract from Petromont for a purchase price of US$40 million, payable in cash and the assumption of certain liabilities related to the LLA23 contract, subject to certain post-closing adjustments relating to unbilled expenditures attributable to the acquired interest prior to the date of the transaction. Application has been made to the National Agency of Hydrocarbons of Colombia ("ANH") for formal recognition of the transaction and of the Corporation's additional 10% working interest in the LLA 23 contract.

The Acquisition has the following characteristics:


--  Current production: 775 bopd
--  Proved plus probable reserves: 1.3 mmbo of light and medium crude oil
    (May 31, 2014)(1,2)
--  Operating netback(3): $60-$65 per barrel

1.  Reserves are Gross Company Reserves as evaluated by PetroTech
    Engineering Ltd. as of May 31, 2014. Gross Company Reserves are
    Petromonts working interest reserves before the deduction of royalties.
2.  Canacol intends to release an updated corporate reserve report effective
    June 30, 2014.
3.  Based on expected average prices for Q3/Q4 2014 and historical Canacol
    operated production, transportation and royalty expenses.

Labrador 4 production test results

The Labrador 4 well was spud on April 30, 2014 and reached a total depth of 11,939 feet measured depth ("ft md") on May 18, 2014. The well encountered 111 feet ("ft") of net oil pay in the C7, Mirador, Barco, Gacheta and Ubaque reservoirs.

The Gacheta reservoir was perforated from 11,261 - 282 and 11,330 - 352 ft md and for a test period of 24 hours on the 16th of June 2014 flowed at an average gross rate of 1,193 bopd (1,074 bopd net) of 27 degrees API oil with 4% water cut and 7 thousand standard cubic feet per day ("mscfpd") of gas using an electro submersible pump ("ESP") set to a frequency of 55 Hz. The Ubaque reservoir was perforated from 11,390 - 11,394 ft md for a test period of 24 hours on June 2, 2014. The well flowed at an average gross rate of 638 bopd (574 bopd net) of 23 degrees API oil with 20% water cut believed to be related to the drilling and completion of the well, and 1 mscfpd using an ESP set to a frequency of 35 Hz. The well will be placed on permanent production from the Gacheta reservoir subject to the approval of the ANH.

Leono 3 production test results

The Leono 3 well was spud on May 12, 2014 and reached a total depth of 12,590 ft md on May 26, 2014. The well encountered 36 ft of net oil pay within the C7, Mirador, Gacheta, and Ubaque reservoirs. The Mirador reservoir was perforated from 11,158 to 11,165 ft md and for a test period of 7 days ended on the 14th of June 2014 flowed at an average gross rate of 1,067 bopd (960 bopd net) of 36 degrees API oil with 0.6 % water cut and 0.5 mscfpd of gas using a jet pump at 2,000 pounds per square inch. The well will be left on permanent production from the Mirador reservoir subject to the approval of the ANH.

Forward Plans on LLA23

The rig that drilled the Labrador 4 well is about to rig up to drill the Maltes 1 exploration well which is located approximately 2 kilometers north of the Labrador field. It is anticipated that the Maltes 1 exploration well will take approximately 6 weeks to drill and test. The rig that drilled the Leono 3 well is currently rigging up to drill the Pantro 2 appraisal well, which is located approximately 3 km south of Leono. The Pantro 2 well is anticipated to spud in the first week of July 2014, and will take approximately 6 weeks to drill and test.

The Corporation has recently obtained all of the necessary permits required to acquire 400 square kms of 3D seismic data and anticipates commencing acquisition in approximately 2 weeks. The seismic program is anticipated to be completed by the end of July 2014, with the results being used to plan the Corporation's exploration and development drilling programs on the LLA23 contract in calendar 2015 and 2016.

Canacol is an exploration and production company with operations focused in Colombia and Ecuador. The Corporation's common stock trades on the Toronto Stock Exchange, the OTCQX in the United States of America, and the Colombia Stock Exchange under ticker symbol CNE, CNNEF, and CNE.C, respectively.

This press release contains certain forward-looking statements within the meaning of applicable securities law. Forward-looking statements are frequently characterized by words such as "plan", "expect", "project", "intend", "believe", "anticipate", "estimate" and other similar words, or statements that certain events or conditions "may" or "will" occur, including without limitation statements relating to estimated production rates from the Corporation's properties and intended work programs and associated timelines. Forward-looking statements are based on the opinions and estimates of management at the date the statements are made and are subject to a variety of risks and uncertainties and other factors that could cause actual events or results to differ materially from those projected in the forward-looking statements. The Corporation cannot assure that actual results will be consistent with these forward looking statements. They are made as of the date hereof and are subject to change and the Corporation assumes no obligation to revise or update them to reflect new circumstances, except as required by law. Prospective investors should not place undue reliance on forward looking statements. These factors include the inherent risks involved in the exploration for and development of crude oil and natural gas properties, the uncertainties involved in interpreting drilling results and other geological and geophysical data, fluctuating energy prices, the possibility of cost overruns or unanticipated costs or delays and other uncertainties associated with the oil and gas industry. Other risk factors could include risks associated with negotiating with foreign governments as well as country risk associated with conducting international activities, and other factors, many of which are beyond the control of the Corporation.

Data obtained from the initial testing results at wells identified in this press release, including barrels of oil produced and levels of water-cut, should be considered to be preliminary until a further and detailed analysis or interpretation has been done on such data. The well test results obtained and disclosed in this press release are not necessarily indicative of long-term performance or of ultimate recovery. The reader is cautioned not to unduly rely on such results as such results may not be indicative of future performance the wells or of expected production results for the Corporation in the future.

The reserves evaluation, effective May 31, 2014, was conducted by Petrotech Engineering Ltd. and is in accordance with National Instrument 51-101 - Standards of Disclosure for Oil and Gas Activities. The reserves are provided on a net before royalty basis in units of millions of barrels of oil equivalent using a forecast price deck for oil and gas, adjusted for crude quality, in US dollars.

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
You think you know what’s in your data. But do you? Most organizations are now aware of the business intelligence represented by their data. Data science stands to take this to a level you never thought of – literally. The techniques of data science, when used with the capabilities of Big Data technologies, can make connections you had not yet imagined, helping you discover new insights and ask new questions of your data. In his session at @ThingsExpo, Sarbjit Sarkaria, data science team lead ...
The IoT has the potential to create a renaissance of manufacturing in the US and elsewhere. In his session at 18th Cloud Expo, Florent Solt, CTO and chief architect of Netvibes, will discuss how the expected exponential increase in the amount of data that will be processed, transported, stored, and accessed means there will be a huge demand for smart technologies to deliver it. Florent Solt is the CTO and chief architect of Netvibes. Prior to joining Netvibes in 2007, he co-founded Rift Technol...
If there is anything we have learned by now, is that every business paves their own unique path for releasing software- every pipeline, implementation and practices are a bit different, and DevOps comes in all shapes and sizes. Software delivery practices are often comprised of set of several complementing (or even competing) methodologies – such as leveraging Agile, DevOps and even a mix of ITIL, to create the combination that’s most suitable for your organization and that maximize your busines...
Struggling to keep up with increasing application demand? Learn how Platform as a Service (PaaS) can streamline application development processes and make resource management easy.
New Relic, Inc. has announced a set of new features across the New Relic Software Analytics Cloud that offer IT operations teams increased visibility, and the ability to diagnose and resolve performance problems quickly. The new features further IT operations teams’ ability to leverage data and analytics, as well as drive collaboration and a common, shared understanding between teams. Software teams are under pressure to resolve performance issues quickly and improve availability, as the comple...
The proper isolation of resources is essential for multi-tenant environments. The traditional approach to isolate resources is, however, rather heavyweight. In his session at 18th Cloud Expo, Igor Drobiazko, co-founder of elastic.io, will draw upon their own experience with operating a Docker container-based infrastructure on a large scale and present a lightweight solution for resource isolation using microservices. He will also discuss the implementation of microservices in data and applicat...
Join IBM June 8 at 18th Cloud Expo at the Javits Center in New York City, NY, and learn how to innovate like a startup and scale for the enterprise. You need to deliver quality applications faster and cheaper, attract and retain customers with an engaging experience across devices, and seamlessly integrate your enterprise systems. And you can't take 12 months to do it.
See storage differently! Storage performance problems have only gotten worse and harder to solve as applications have become largely virtualized and moved to a cloud-based infrastructure. Storage performance in a virtualized environment is not just about IOPS, it is about how well that potential performance is guaranteed to individual VMs for these apps as the number of VMs keep going up real time. In his session at 18th Cloud Expo, Dhiraj Sehgal, in product and marketing at Tintri, will discu...
Machine Learning helps make complex systems more efficient. By applying advanced Machine Learning techniques such as Cognitive Fingerprinting, wind project operators can utilize these tools to learn from collected data, detect regular patterns, and optimize their own operations. In his session at 18th Cloud Expo, Stuart Gillen, Director of Business Development at SparkCognition, will discuss how research has demonstrated the value of Machine Learning in delivering next generation analytics to im...
This is not a small hotel event. It is also not a big vendor party where politicians and entertainers are more important than real content. This is Cloud Expo, the world's longest-running conference and exhibition focused on Cloud Computing and all that it entails. If you want serious presentations and valuable insight about Cloud Computing for three straight days, then register now for Cloud Expo.
As you respond to increasing requests for new analytics, you need fast and flexible technology in your arsenal so that you can deploy the right workload to the right platform for the need at hand. Do you need self-service and fast time to value? Do you have data and application control and privacy needs, along with strict SLAs to meet? IBM dashDB™ is data warehouse technology powered by in-memory computing and in-database analytics that are designed for fast results, scalability and more.
SYS-CON Events announced today that SoftLayer, an IBM Company, has been named “Gold Sponsor” of SYS-CON's 18th Cloud Expo, which will take place on June 7-9, 2016, at the Javits Center in New York, New York. SoftLayer, an IBM Company, provides cloud infrastructure as a service from a growing number of data centers and network points of presence around the world. SoftLayer’s customers range from Web startups to global enterprises.
So, you bought into the current machine learning craze and went on to collect millions/billions of records from this promising new data source. Now, what do you do with them? Too often, the abundance of data quickly turns into an abundance of problems. How do you extract that "magic essence" from your data without falling into the common pitfalls? In her session at @ThingsExpo, Natalia Ponomareva, Software Engineer at Google, will provide tips on how to be successful in large scale machine lear...
Up until last year, enterprises that were looking into cloud services usually undertook a long-term pilot with one of the large cloud providers, running test and dev workloads in the cloud. With cloud’s transition to mainstream adoption in 2015, and with enterprises migrating more and more workloads into the cloud and in between public and private environments, the single-provider approach must be revisited. In his session at 18th Cloud Expo, Yoav Mor, multi-cloud solution evangelist at Cloudy...
IoT device adoption is growing at staggering rates, and with it comes opportunity for developers to meet consumer demand for an ever more connected world. Wireless communication is the key part of the encompassing components of any IoT device. Wireless connectivity enhances the device utility at the expense of ease of use and deployment challenges. Since connectivity is fundamental for IoT device development, engineers must understand how to overcome the hurdles inherent in incorporating multipl...