Click here to close now.




















Welcome!

News Feed Item

Aldrin Intersects Additional Elevated Radiation on the Anticline Target

Highlights:

VANCOUVER, BRITISH COLUMBIA -- (Marketwired) -- 06/19/14 -- Aldrin Resource Corp. ("Aldrin") (TSX VENTURE: ALN) is pleased to report new intersections of radioactive mineralization in the second half of the first drill hole (ALN14-008) testing the Anticline Target, as well as in both subsequent drill tests (ALN14-009 and ALN14-010), based on field data from a Mount Sopris model 2PGA-1000 down-hole gamma logger. The Anticline Target is a coincident basement conductor, gravity low and structural feature extending more than 2.5 km on strike (Fig. 1). It is located on Aldrin's Triple M Property which is adjacent to Fission Uranium Corporation's spectacular high-grade uranium discovery at Patterson Lake in northern Saskatchewan.

As the Company reported in a news release dated May 29, 2014 the down-hole gamma logger identified 9 zones in the upper portion of drill hole ALN14-008 between 176.6 m and 246. 2 m depth spanning in total 14.6 m which read values above 300 counts per second (CPS) over greater than 0.3 m. As detailed in the May 29 news release, the two highest count zones reached maximum values 1380 CPS (176.6 m to 183.2 m) and 1850 CPS (243.1 m to 246.2 m), where values remained above 1000 CPS over a combined drill thickness of 2.7 m. Six of the other zones had high counts above 500 CPS, and the remaining zone had a high count of 380 CPS.

Subsequent to the May 29 news release, drill hole ALN14-008 continued drilling to a total depth of 416 m. The drill hole intersected an additional 5 zones with greater than 300 CPS over a combined 10.25 m between 256.1 m and 293 m depth. There were 6 new peaks greater than 500 CPS, with the highest reaching 800 CPS at 325.5 m depth (Table 1).

The high-count zones in drill hole ALN14-008 occur within intensely altered, locally graphitic and garnetiferous, pelitic and semi-pelitic gneiss. Alteration is clay-rich in the upper part of basement (interpreted as paleoregolith) with local strong hematite staining and is dominated by sericite and pyrite throughout the radioactively mineralized zones. Dravite occurs locally.

Drill holes ALN14-009 and ALN14-010 were drilled to further test the Anticline Target after drill hole ALN14-080 and were completed to total depths of 293 m and 284 m, respectively. ALN14-009 was drilled 75 m west of ALN14-008, and encountered two peaks greater than 500 CPS as well as three others from 390 to 475 CPS (Table 2). The maximum peak value in ALN14-009 is 745 CPS. ALN14-010 was drilled 35 m northwest of ALN14-008, and encountered 3 peaks greater than 500 CPS (maximum value 695 CPS) plus another that reached 380 CPS. All peaks were measured using the same Mount Sopris 2PGA-1000 down-hole gamma logger described above for ALN14-008. Both ALN14-009 and ALN14-010 are dominated by variably graphitic, pelitic and semi-pelitic gneiss, with strong sericite and pyrite alteration. Alteration is similar to, but generally less intense than, drill hole ALN14-008, which is consistent with ALN14-009 and ALN14-010 being slightly further out in the mineralization halo compared to drill hole ALN14-008.

To view Figure 1, please visit the following link: http://media3.marketwire.com/docs/aln0619fig1.pdf.

Background radiation levels are generally below 200 CPS in the meta-sedimentary rocks that dominate the drill target area. Aldrin considers intervals greater than 0.3 m thick and with greater than 300 CPS to be significant radioactive mineralization for our exploration program in the Triple M Property area. True thickness has not yet been determined for the intervals. Note that the 2PGA-1000 down-hole logger records total counts which can be derived from potassium (K), thorium (Th) or uranium (U) radiation and thus may not be directly related to uranium content in the drill core. Although a good correlation has been reported between total counts and uranium content at Fission Uranium Corp's Patterson Lake discovery, the actual radioactive source element will only be known for the Anticline discovery after chemical analysis on drill core is completed at the Saskatchewan Research Council Laboratory in Saskatoon, Saskatchewan in the coming weeks.

Johnathan More, Aldrin Director and CEO, remarked, "I am very encouraged with the strong results from our first drill tests of the Anticline Target. I anticipate even more remarkable results when we return to drilling immediately following our high-resolution surface geophysics and geochemistry."

Harrison Cookenboo, Ph.D., P.Geo. and Aldrin's Vice President Exploration and Development, is a Qualified Person (QP) by the standards of National Instrument 43-101. He has reviewed the technical data described above and approves the contents of this news release.

ON BEHALF OF THE BOARD

Johnathan More, CEO and Director

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Table 1: High-count intervals from drill hole ALN14-008:

ALN14-008 Intervals greater than 300 CPS over greater than 0.3 m from the 2PGA 1000 down-hole gamma logger.


----------------------------------------------------------------------------
From    To       Thickness
(m)     (m)      (m)
----------------------------------------------------------------------------
176.6 - 183.2 m  6.5 m     MAX = 1380 CPS greater than 1000 CPS = 0.6 m
                                           cumulative

184.7 - 185.6 m  0.9 m     MAX = 505  CPS

201.8 - 202.1 m  0.4 m     MAX = 550  CPS

207.4 - 207.9 m  0.6 m     MAX = 755  CPS

225.1 - 226.3 m  1.1 m     MAX = 880  CPS

227.6 - 228.2 m  0.6 m     MAX = 730  CPS

230.0 - 230.7 m  0.7 m     MAX = 380  CPS

234.5 - 235.1 m  0.7 m     MAX = 500  CPS

243.1 - 246.2 m  3.1 m     MAX = 1850 CPS greater than 1000 CPS = 2.1 m
                                           continuous

256.1 - 260.0 m  3.5 m     MAX = 535  CPS

262.8 - 264.0 m  1.2 m     MAX = 430  CPS

268.1 - 270.0 m  1.9 m     MAX = 780  CPS

287.7 - 290.4 m  2.7 m     MAX = 600  CPS

292.4 - 293.7 m  1.3 m     MAX = 450  CPS

323.3 - 323.9 m  0.6 m     MAX = 430  CPS
                 ----------
                 25.8 m
----------------------------------------------------------------------------

Table 2: High-count intervals from ALN14-009 and ALN14-010


--------------------------------------------
From      To        Thickness
(m)       (m)       (m)
--------------------------------------------
ALN14-009
----------
----------

214.9  -  217.5 m   2.4 m      MAX = 505 CPS

237.9  -  238.7 m   0.8 m      MAX = 475 CPS

247.4  -  248.0 m   0.6 m      MAX = 745 CPS

252.0  -  252.7 m   0.7 m      MAX = 390 CPS

288.3  -  289.1 m   0.8 m      MAX = 395 CPS
--------------------------------------------

ALN14-010
----------
----------
226.7  -  227.6 m   0.9 m      MAX = 525 CPS

228.9  -  229.4 m   0.5 m      MAX = 510 CPS

232.3  -  232.9 m   0.6 m      MAX = 685 CPS

281.4  -  282.0 m   0.6 m      MAX = 380 CPS
--------------------------------------------

Contacts:
Aldrin Resource Corp.
Johnathan More
CEO and Director
(604) 687-7741
(604) 681-0796 (FAX)

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
Mobile testing is getting harder: more devices, multiple operating systems, higher quality expectations and shorter development cycles. In his session at DevOps Summit, Tom Chavez, Senior Evangelist at SOASTA, will discuss the seven steps to improving your mobile testing process. Tom Chavez, with 20+ years of experience as a product manager in software development tools, works in product management at SOASTA, the leader in performance analytics. He has worked across the Silicon Valley at indu...
Contrary to mainstream media attention, the multiple possibilities of how consumer IoT will transform our everyday lives aren’t the only angle of this headline-gaining trend. There’s a huge opportunity for “industrial IoT” and “Smart Cities” to impact the world in the same capacity – especially during critical situations. For example, a community water dam that needs to release water can leverage embedded critical communications logic to alert the appropriate individuals, on the right device, as...
Manufacturing connected IoT versions of traditional products requires more than multiple deep technology skills. It also requires a shift in mindset, to realize that connected, sensor-enabled “things” act more like services than what we usually think of as products. In his session at @ThingsExpo, David Friedman, CEO and co-founder of Ayla Networks, will discuss how when sensors start generating detailed real-world data about products and how they’re being used, smart manufacturers can use the ...
The 5th International DevOps Summit, co-located with 17th International Cloud Expo – being held November 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA – announces that its Call for Papers is open. Born out of proven success in agile development, cloud computing, and process automation, DevOps is a macro trend you cannot afford to miss. From showcase success stories from early adopters and web-scale businesses, DevOps is expanding to organizations of all sizes, including the ...
The Internet of Things is in the early stages of mainstream deployment but it promises to unlock value and rapidly transform how organizations manage, operationalize, and monetize their assets. IoT is a complex structure of hardware, sensors, applications, analytics and devices that need to be able to communicate geographically and across all functions. Once the data is collected from numerous endpoints, the challenge then becomes converting it into actionable insight.
Even though you are running an agile development process, that doesn’t necessarily mean that your performance testing is being conducted in a truly agile way. Saving performance testing for a “final sprint” before release still treats it like a waterfall development step, with all the cost and risk that comes with that. In this post, we will show you how to make load testing happen early and often by putting SLAs on the agile task board.
While many app developers are comfortable building apps for the smartphone, there is a whole new world out there. In his session at @ThingsExpo, Narayan Sainaney, Co-founder and CTO of Mojio, will discuss how the business case for connected car apps is growing and, with open platform companies having already done the heavy lifting, there really is no barrier to entry.
Moving an existing on-premise infrastructure into the cloud can be a complex and daunting proposition. It is critical to understand the benefits as well as the challenges associated with either a full or hybrid approach. In his session at 17th Cloud Expo, Richard Weiss, Principal Consultant at Pythian, will present a roadmap that can be leveraged by any organization to plan, analyze, evaluate and execute on a cloud migration solution. He will review the five major cloud transformation phases a...
As more intelligent IoT applications shift into gear, they’re merging into the ever-increasing traffic flow of the Internet. It won’t be long before we experience bottlenecks, as IoT traffic peaks during rush hours. Organizations that are unprepared will find themselves by the side of the road unable to cross back into the fast lane. As billions of new devices begin to communicate and exchange data – will your infrastructure be scalable enough to handle this new interconnected world?
DevOps Summit, taking place Nov 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA, is co-located with 17th Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world. The widespread success of cloud computing is driving the DevOps revolution in enterprise IT. Now as never before, development teams must communicate and collaborate in a dynamic, 24/7/365 environment. There is no time to wait for long development...
Consumer IoT applications provide data about the user that just doesn’t exist in traditional PC or mobile web applications. This rich data, or “context,” enables the highly personalized consumer experiences that characterize many consumer IoT apps. This same data is also providing brands with unprecedented insight into how their connected products are being used, while, at the same time, powering highly targeted engagement and marketing opportunities. In his session at @ThingsExpo, Nathan Trel...
Puppet Labs is pleased to share the findings from our 2015 State of DevOps Survey. We have deepened our understanding of how DevOps enables IT performance and organizational performance, based on responses from more than 20,000 technical professionals we’ve surveyed over the past four years. The 2015 State of DevOps Report reveals high-performing IT organizations deploy 30x more frequently with 200x shorter lead times. They have 60x fewer failures and recover 168x faster
Through WebRTC, audio and video communications are being embedded more easily than ever into applications, helping carriers, enterprises and independent software vendors deliver greater functionality to their end users. With today’s business world increasingly focused on outcomes, users’ growing calls for ease of use, and businesses craving smarter, tighter integration, what’s the next step in delivering a richer, more immersive experience? That richer, more fully integrated experience comes ab...
The 3rd International WebRTC Summit, to be held Nov. 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA, announces that its Call for Papers is now open. Topics include all aspects of improving IT delivery by eliminating waste through automated business models leveraging cloud technologies. WebRTC Summit is co-located with 15th International Cloud Expo, 6th International Big Data Expo, 3rd International DevOps Summit and 2nd Internet of @ThingsExpo. WebRTC (Web-based Real-Time Com...
SYS-CON Events announced today the Containers & Microservices Bootcamp, being held November 3-4, 2015, in conjunction with 17th Cloud Expo, @ThingsExpo, and @DevOpsSummit at the Santa Clara Convention Center in Santa Clara, CA. This is your chance to get started with the latest technology in the industry. Combined with real-world scenarios and use cases, the Containers and Microservices Bootcamp, led by Janakiram MSV, a Microsoft Regional Director, will include presentations as well as hands-on...