Welcome!

News Feed Item

Continental Gold Files NI 43-101 Technical Report and Announces Commencement of Preliminary Economic Assessment on its Buritica Project, Colombia

TORONTO, ONTARIO -- (Marketwired) -- 06/26/14 -- Continental Gold Limited (TSX: CNL)(OTCQX: CGOOF) ("Continental" or the "Company") is pleased to announce that, further to its press release of May 13, 2014 announcing an updated mineral resource estimate for the Buritica project in Colombia, the Company has filed with Canadian securities regulators an independent technical report prepared in accordance with National Instrument 43-101 ("NI 43-101") entitled "Independent Technical Report and Resource Estimate on the Buritica Gold Project 2013" (the "Technical Report"), containing the updated mineral resource estimates. The Technical Report, dated June 25, 2014, with an effective date of December 31, 2013, was prepared for the Company by Mining Associates Pty Limited. A copy of the Technical Report can be accessed under the Company's SEDAR profile at www.sedar.com, or on the Company's website at www.continentalgold.com.

The Technical Report covers two major vein systems - Yaragua and Veta Sur - with a combined Measured mineral resource of 990,000 tonnes of mineralized material containing 650,000 ounces of gold grading 20.4 g/t gold, 1,540,000 ounces of silver grading 48 g/t silver, and 15,000,000 pounds of zinc grading 0.7% zinc, and a combined Indicated mineral resource of 7,410,000 tonnes of mineralized material containing 2,150,000 ounces of gold grading 9.0 g/t gold, 6,890,000 ounces of silver grading 29 g/t silver, and 75,100,000 pounds of zinc grading 0.5% zinc. The combined Inferred mineral resource is 16,700,000 tonnes of mineralized material containing 4,200,000 ounces of gold grading 7.8 g/t gold, 13,100,000 ounces of silver grading 24 g/t silver and 111,000,000 pounds of zinc grading 0.3% zinc.


---------------------------------------------------------------------------
Combined Yaragua and Veta Sur Mineral Resources above a 3 g/t gold cut-off,
                          as at December 31, 2013
---------------------------------------------------------------------------
      Resource                 Grades                       Metal
---------------------------------------------------------------------------
                                   AuEq                        AuEq
Category  M tonnes Au g/t Ag g/t    g/t   Zn % Au Moz Ag Moz    Moz  Zn Mlb
---------------------------------------------------------------------------
Measured      0.99   20.4     48   21.4   0.7%   0.65   1.54   0.68    15.0
---------------------------------------------------------------------------
Indicated     7.41    9.0     29    9.6   0.5%   2.15   6.89   2.29    75.1
---------------------------------------------------------------------------
M & I         8.39   10.4     31   11.0   0.5%   2.80   8.43   2.97    90.1
---------------------------------------------------------------------------
Inferred      16.7    7.8     24    8.2   0.3%    4.2   13.1    4.4     111
---------------------------------------------------------------------------
Notes - Reported tonnage and grade figures have been rounded from raw
estimates to reflect the order of accuracy of the estimate. Minor
variations may occur during the addition of rounded numbers. There have
been no assumptions made as to metal prices or recoveries in this mineral
resource estimate other than in gold equivalents that are calculated for
AuEq = Au+ Ag/50. M in Figures and Tables represents millions.
---------------------------------------------------------------------------

In addition, the Company announces that it has engaged M3 Engineering & Technology Corp. ("M3"), a full-service international engineering design company headquartered in Tucson, Arizona, to oversee and complete a Preliminary Economic Assessment ("PEA") of the Buritica project in Q4 2014. Since its inception in 1986, M3 has provided architectural, engineering and construction management services, ranging from technical and financial conception to operational startup, on numerous domestic and international mining and other projects with unique technical challenges.

The PEA will be the first economic study for Buritica, to determine the potential mining and processing parameters and associated capital expenditures and operating costs for the project. The following table lists the contributors that will be responsible for the various aspects of the PEA:


---------------------------------------------------------------------------
Component                     Contributor
---------------------------------------------------------------------------
Geology                       Continental Gold Limited
---------------------------------------------------------------------------
Mineral Resource Estimate     Mining Associates Pty Limited (Australia)
---------------------------------------------------------------------------
Mine Planning                 NCL Ingeneiria Y Construccion S.A. (Chile)
---------------------------------------------------------------------------
Metallurgy and Process Plant
Design                        Transmin (Peru)/M3 (US and Mexico)
---------------------------------------------------------------------------
Geotechnical Studies          Ingeroc (Chile)
---------------------------------------------------------------------------
Hydrology and Hydrogeology    SAG (Colombia)
---------------------------------------------------------------------------
Tailings Storage              SVS Ingenieros (division of SRK (Peru))
---------------------------------------------------------------------------
Power Supply                  HMV Ingenieros Ltda (Colombia)
---------------------------------------------------------------------------
Environmental Baseline        SAG (Colombia)
---------------------------------------------------------------------------

The PEA is intended to be a preliminary step and is in addition to, and not a replacement, substitute or proxy for the planned Pre-Feasibility Study ("PFS"), which the Company still intends to complete on schedule in the second half of 2015. The PEA will be based off the updated mineral resource estimate contained in the Technical Report.

"The track record of both M3 and NCL for project design and implementation in Latin America is excellent," commented Ari Sussman, CEO. "We look forward to delivering a realistic PEA in Q4 2014, providing a first-pass outline for the Buritica project."

About Continental

Continental Gold Limited is an advanced-stage exploration and development company with an extensive portfolio of 100%-owned gold projects in Colombia. Spearheaded by a team with over 40 years of exploration and mining experience in Colombia, the Company is focused on advancing its high-grade Buritica gold project to production.

Additional details on the Buritica project and the rest of Continental's suite of exploration properties are available at www.continentalgold.com.

The authors of the Technical Report, Mr. Andrew Vigar, BAppSc Geo, FAusIMM, MSEG, and Mr. Martin Recklies, BAppSc Geo, MAIG, each of Mining Associates Pty Limited, are each a "qualified person" (as such term is defined in NI 43-101) and independent of the Company, and have prepared or supervised the preparation of the technical information upon which the technical information contained in this press release is based.

Forward-Looking Statements

This press release contains or refers to forward-looking information under Canadian securities legislation, including statements regarding the estimation of mineral resources, exploration results, potential mineralization, the anticipated completion of a PEA and PFS, and exploration and mine development plans, and is based on current expectations that involve a number of business risks and uncertainties. Forward- looking statements are subject to significant risks and uncertainties, and other factors that could cause actual results to differ materially from expected results. Readers should not place undue reliance on forward-looking statements. Factors that could cause actual results to differ materially from any forward-looking statement include, but are not limited to, failure to convert estimated mineral resources to reserves, capital and operating costs varying significantly from estimates, the preliminary nature of metallurgical test results, delays in obtaining or failures to obtain required governmental, environmental or other project approvals, political risks, uncertainties relating to the availability and costs of financing needed in the future, changes in equity markets, inflation, changes in exchange rates, fluctuations in commodity prices, delays in the development of projects and the other risks involved in the mineral exploration and development industry forward-looking statements are subject to significant risks and uncertainties, and other factors that could cause actual results to differ materially from expected results. These forward-looking statements are made as of the date hereof and the Company assumes no responsibility to update them or revise them to reflect new events or circumstances other than as required by law.

Differences in Reporting of Resource Estimates

This press release was prepared in accordance with Canadian standards, which differ in some respects from United States standards. In particular, and without limiting the generality of the foregoing, the terms "inferred mineral resources," "indicated mineral resources," "measured mineral resources" and "mineral resources" used or referenced in this press release are Canadian mining terms as defined in accordance with National Instrument 43-101 - Standards of Disclosure for Mineral Projects under the guidelines set out in the Canadian Institute of Mining, Metallurgy and Petroleum (the "CIM") Standards on Mineral Resources and Mineral Reserves (the "CIM Standards"). The CIM Standards differ significantly from standards in the United States. While the terms "mineral resource," "measured mineral resources," "indicated mineral resources," and "inferred mineral resources" are recognized and required by Canadian regulations, they are not defined terms under standards in the United States. "Inferred mineral resources" have a great amount of uncertainty as to their existence, and great uncertainty as to their economic and legal feasibility. It cannot be assumed that all or any part of an inferred mineral resource will ever be upgraded to a higher category. Under Canadian securities laws, estimates of inferred mineral resources may not form the basis of feasibility or other economic studies. Readers are cautioned not to assume that all or any part of measured or indicated mineral resources will ever be converted into reserves. Readers are also cautioned not to assume that all or any part of an inferred mineral resource exists, or is economically or legally mineable. Disclosure of "contained ounces" in a resource is permitted disclosure under Canadian regulations; however, United States companies are only permitted to report mineralization that does not constitute "reserves" by standards in the United States as in place tonnage and grade without reference to unit measures. Accordingly, information regarding resources contained or referenced in this press release containing descriptions of our mineral deposits may not be comparable to similar information made public by United States companies.

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
Much of the value of DevOps comes from a (renewed) focus on measurement, sharing, and continuous feedback loops. In increasingly complex DevOps workflows and environments, and especially in larger, regulated, or more crystallized organizations, these core concepts become even more critical. In his session at @DevOpsSummit at 18th Cloud Expo, Andi Mann, Chief Technology Advocate at Splunk, will show how, by focusing on 'metrics that matter,' you can provide objective, transparent, and meaningfu...
Many private cloud projects were built to deliver self-service access to development and test resources. While those clouds delivered faster access to resources, they lacked visibility, control and security needed for production deployments. In their session at 18th Cloud Expo, Steve Anderson, Product Manager at BMC Software, and Rick Lefort, Principal Technical Marketing Consultant at BMC Software, will discuss how a cloud designed for production operations not only helps accelerate developer...
Artificial Intelligence has the potential to massively disrupt IoT. In his session at 18th Cloud Expo, AJ Abdallat, CEO of Beyond AI, will discuss what the five main drivers are in Artificial Intelligence that could shape the future of the Internet of Things. AJ Abdallat is CEO of Beyond AI. He has over 20 years of management experience in the fields of artificial intelligence, sensors, instruments, devices and software for telecommunications, life sciences, environmental monitoring, process...
Manufacturers are embracing the Industrial Internet the same way consumers are leveraging Fitbits – to improve overall health and wellness. Both can provide consistent measurement, visibility, and suggest performance improvements customized to help reach goals. Fitbit users can view real-time data and make adjustments to increase their activity. In his session at @ThingsExpo, Mark Bernardo Professional Services Leader, Americas, at GE Digital, will discuss how leveraging the Industrial Interne...
The IoTs will challenge the status quo of how IT and development organizations operate. Or will it? Certainly the fog layer of IoT requires special insights about data ontology, security and transactional integrity. But the developmental challenges are the same: People, Process and Platform. In his session at @ThingsExpo, Craig Sproule, CEO of Metavine, will demonstrate how to move beyond today's coding paradigm and share the must-have mindsets for removing complexity from the development proc...
Increasing IoT connectivity is forcing enterprises to find elegant solutions to organize and visualize all incoming data from these connected devices with re-configurable dashboard widgets to effectively allow rapid decision-making for everything from immediate actions in tactical situations to strategic analysis and reporting. In his session at 18th Cloud Expo, Shikhir Singh, Senior Developer Relations Manager at Sencha, will discuss how to create HTML5 dashboards that interact with IoT devic...
The IETF draft standard for M2M certificates is a security solution specifically designed for the demanding needs of IoT/M2M applications. In his session at @ThingsExpo, Brian Romansky, VP of Strategic Technology at TrustPoint Innovation, will explain how M2M certificates can efficiently enable confidentiality, integrity, and authenticity on highly constrained devices.
We're entering the post-smartphone era, where wearable gadgets from watches and fitness bands to glasses and health aids will power the next technological revolution. With mass adoption of wearable devices comes a new data ecosystem that must be protected. Wearables open new pathways that facilitate the tracking, sharing and storing of consumers’ personal health, location and daily activity data. Consumers have some idea of the data these devices capture, but most don’t realize how revealing and...
There is an ever-growing explosion of new devices that are connected to the Internet using “cloud” solutions. This rapid growth is creating a massive new demand for efficient access to data. And it’s not just about connecting to that data anymore. This new demand is bringing new issues and challenges and it is important for companies to scale for the coming growth. And with that scaling comes the need for greater security, gathering and data analysis, storage, connectivity and, of course, the...
Struggling to keep up with increasing application demand? Learn how Platform as a Service (PaaS) can streamline application development processes and make resource management easy.
SYS-CON Events announced today that Ericsson has been named “Gold Sponsor” of SYS-CON's @ThingsExpo, which will take place on June 7-9, 2016, at the Javits Center in New York, New York. Ericsson is a world leader in the rapidly changing environment of communications technology – providing equipment, software and services to enable transformation through mobility. Some 40 percent of global mobile traffic runs through networks we have supplied. More than 1 billion subscribers around the world re...
In the world of DevOps there are ‘known good practices’ – aka ‘patterns’ – and ‘known bad practices’ – aka ‘anti-patterns.' Many of these patterns and anti-patterns have been developed from real world experience, especially by the early adopters of DevOps theory; but many are more feasible in theory than in practice, especially for more recent entrants to the DevOps scene. In this power panel at @DevOpsSummit at 18th Cloud Expo, moderated by DevOps Conference Chair Andi Mann, panelists will dis...
We’ve worked with dozens of early adopters across numerous industries and will debunk common misperceptions, which starts with understanding that many of the connected products we’ll use over the next 5 years are already products, they’re just not yet connected. With an IoT product, time-in-market provides much more essential feedback than ever before. Innovation comes from what you do with the data that the connected product provides in order to enhance the customer experience and optimize busi...
The increasing popularity of the Internet of Things necessitates that our physical and cognitive relationship with wearable technology will change rapidly in the near future. This advent means logging has become a thing of the past. Before, it was on us to track our own data, but now that data is automatically available. What does this mean for mHealth and the "connected" body? In her session at @ThingsExpo, Lisa Calkins, CEO and co-founder of Amadeus Consulting, will discuss the impact of wea...
If there is anything we have learned by now, is that every business paves their own unique path for releasing software- every pipeline, implementation and practices are a bit different, and DevOps comes in all shapes and sizes. Software delivery practices are often comprised of set of several complementing (or even competing) methodologies – such as leveraging Agile, DevOps and even a mix of ITIL, to create the combination that’s most suitable for your organization and that maximize your busines...