Welcome!

News Feed Item

Recon Aircore Drilling Finds Anomalous Gold Over Wide Area on the Mougnina Project

VANCOUVER, BRITISH COLUMBIA -- (Marketwired) -- 07/17/14 -- Legend Gold Corp. (the "Company" or "Legend") (TSX VENTURE: LGN) is pleased to announce the results from a 5,845 meter reconnaissance aircore drill program on the Mougnina Project located within the Bala Ouest Exploration Permit Application area. The drilling returned anomalous gold over two areas of ancient artisanal workings, Site B and Site G (To view the accompanying maps, visit the following link: http://media3.marketwire.com/docs/LGNmaps2014-08.pdf).

The five sub-areas drilled, Sites A, B, C, F and G, had been selected on the basis of termite mound and soil auger geochemistry as well as the presence of ancient artisanal workings. Five fences, 400 meters apart were drilled on Site G, four fences on Site B, three fences on Site A and one fence each on Site C and F. All holes had a declination of -60 degrees and were allowed to run until bit refusal, at an average depth of 35 meters, although a number of holes on Site B were significantly shorter due to abundant quartz at shallow depths. Holes were spaced 50 meters apart on the fences, leaving a gap in drill hole coverage of approximately 30 meters between holes.

Fifty one (51) of 163 drill holes returned anomalous gold, that is, values greater than 100 ppb. These values were concentrated in holes adjacent to the trend of the ancient artisanal workings. Distal holes on the fences were not anomalous. Best intercept values are shown in the table below.


--------------------------------------------------------------------------

                                           Length        Grade
Hole ID          From (m)      To (m)         (m)        (g/t)       Sites
--------------------------------------------------------------------------
MGAC062                 8          10           2        20.93           G
--------------------------------------------------------------------------
MGAC147                24          26           2        6.665           A
--------------------------------------------------------------------------
MGAC068                34          35           1        3.997           F
--------------------------------------------------------------------------
MGAC080                 2           4           2        2.187           B
--------------------------------------------------------------------------
MGAC120                 4           6           2        1.910           A
--------------------------------------------------------------------------
MGAC069                28          30           2        1.877           F
--------------------------------------------------------------------------
MGAC110                32          34           2        1.610           B
--------------------------------------------------------------------------
MGAC067                30          36           2        1.409           F
--------------------------------------------------------------------------
MGAC117                30          34           2        1.378           B
--------------------------------------------------------------------------
MGAC107                 8          12           2        1.270           B
--------------------------------------------------------------------------
MGAC141                 8          10           2        1.230           A
--------------------------------------------------------------------------
MGAC023                30          36           2        1.226           G
--------------------------------------------------------------------------
MGAC069                36          37           1        1.185           F
--------------------------------------------------------------------------

Sites A and B show the most consistent anomalous values, while Sites A, F and G give the highest values. The results of the reconnaissance aircore drilling coupled with current artisanal mining over a strike length of 3 km on Site G are very encouraging. A program of detailed termite mound geochemistry over an area of 3 km x 1 km is currently underway to better define drill targets on Site G. More closely spaced and infill drilling is warranted on Sites A, B, F and G. These Sites all lie on structures inferred from airborne magnetic surveys to be sub-parallel to the major Syama Shear Zone which hosts Resolute's Syama and Tabakoroni mines.

QA/QC Procedures:

The entire volume of chips from each aircore drill interval were collected, dried and split on site into an approximately 2 kg subsample using a Jones splitter on a meter by meter basis. Aircore samples were then recombined using a Jones splitter to obtain 2 meter composite samples. The 2 kg sample was submitted to SGS Laboratories ("SGS") in Bamako for crushing, grinding and 50 gram gold fire assay with AAS finish. Approximately 5% of both high and low grade, oxide gold standards as well as 5% blanks were inserted into the sample stream before delivery of the samples to SGS. Every 20 samples, a duplicate sample was created from the chip rejects and included in the sample stream. Aircore pulps rejects are kept as a reference. A QA/QC analysis was performed on the results of the standard, duplicate and blank sample assays. If results of adjacent standards fell outside three standard deviations of the standard control assay, samples from that batch were flagged for re-assay. All standards, duplicates, and blanks passed the QA/QC validation protocols.

Qualified Person:

Dr. Demetrius Pohl, PhD., Certified Professional Geoscientist (CPG), Legend's V.P. of Exploration, is the Company's Qualified Person for the purposes of National Instrument 43-101 Standards of Disclosures for Mineral Projects of the Canadian Securities Administrators, and has approved the written disclosure of the technical information contained in this news release.

About Legend:

Legend is a mineral exploration and development company focused on exploring for gold in the Republic of Mali, West Africa. Legend's principal projects include the Diba, Lakanfla, Mougnina and Tiekoumala.

This press release has been prepared by Legend Gold Corp. Neither the TSX Venture Exchange nor its Regulation Service Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Statements contained in this news release that are not historical facts are "forward-looking information" or "forward-looking statements" (collectively, "Forward-Looking Information") within the meaning of applicable Canadian securities legislation and the United States Private Securities Litigation Reform Act of 1995. Forward-Looking Information includes, but is not limited to, disclosure regarding possible events, conditions or financial performance that is based on assumptions about future economic conditions and courses of action; the timing and costs of future exploration activities on the Company's properties; success of exploration activities; permitting time lines and requirements; time lines for technical reports; planned exploration and development of properties and the results thereof; and planned expenditures and budgets and the execution thereof. In certain cases, Forward-Looking Information can be identified by the use of words and phrases such as "plans", "expects" or "does not expect", "is expected", budget", "scheduled", "suggest", "optimize", "estimates", "forecasts", "intends", "anticipates", "potential" or "does not anticipate", believes", "anomalous" or variations of such words and phrases or statements that certain actions, events or results "may", "could", "would", "might" or "will be taken", "occur" or "be achieved". In making the forward-looking statements in this news release, the Company has applied several material assumptions, including, but not limited to, that the current exploration and other objectives concerning its mineral projects can be achieved and that its other corporate activities will proceed as expected; that the current price and demand for gold will be sustained or will improve; that general business and economic conditions will not change in a materially adverse manner; the continuity of the price of gold and other metals, economic and political conditions and operations. Forward-Looking Information involves known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements of the Company to be materially different from any future results, performance or achievements expressed or implied by the Forward-Looking Information. Such risks and other factors include, among others, risks related to the availability of financing on commercially reasonable terms and the expected use of proceeds; operations and contractual obligations; changes in

exploration programs based upon results of exploration; future prices of metals; availability of third party contractors; availability of equipment; failure of equipment to operate as anticipated; accidents, effects of weather and other natural phenomena and other risks associated with the mineral exploration industry; environmental risks; certainty of mineral licenses; community and governmental relations; delays in obtaining governmental approvals or financing; fluctuations in mineral prices; the nature of mineral exploration and mining and the uncertain commercial viability of certain mineral deposits; the Company's lack of operating revenues; governmental regulations and the ability to obtain necessary licenses and permits; changes in environmental laws and regulations and changes in the application of standards pursuant to existing laws and regulations which may increase costs of doing business and restrict operations; risks related to dependence on key personnel; and estimates used in financial statements proving to be incorrect; as well as those factors discussed in the Company's public disclosure record. Although the Company has attempted to identify important factors that could affect the Company and may cause actual actions, events or results to differ materially from those described in Forward-Looking Information, there may be other factors that cause actions, events or results not to be as anticipated, estimated or intended. There can be no assurance that Forward-Looking Information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on Forward-Looking Information. Except as required by law, the Company does not assume any obligation to release publicly any revisions to Forward-Looking Information contained in this news release to reflect events or circumstances after the date thereof or to reflect the occurrence of unanticipated events.

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
Get deep visibility into the performance of your databases and expert advice for performance optimization and tuning. You can't get application performance without database performance. Give everyone on the team a comprehensive view of how every aspect of the system affects performance across SQL database operations, host server and OS, virtualization resources and storage I/O. Quickly find bottlenecks and troubleshoot complex problems.
Internet of @ThingsExpo has announced today that Chris Matthieu has been named tech chair of Internet of @ThingsExpo 2017 New York The 7th Internet of @ThingsExpo will take place on June 6-8, 2017, at the Javits Center in New York City, New York. Chris Matthieu is the co-founder and CTO of Octoblu, a revolutionary real-time IoT platform recently acquired by Citrix. Octoblu connects things, systems, people and clouds to a global mesh network allowing users to automate and control design flo...
"We are an all-flash array storage provider but our focus has been on VM-aware storage specifically for virtualized applications," stated Dhiraj Sehgal of Tintri in this SYS-CON.tv interview at 19th Cloud Expo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
With 15% of enterprises adopting a hybrid IT strategy, you need to set a plan to integrate hybrid cloud throughout your infrastructure. In his session at 18th Cloud Expo, Steven Dreher, Director of Solutions Architecture at Green House Data, discussed how to plan for shifting resource requirements, overcome challenges, and implement hybrid IT alongside your existing data center assets. Highlights included anticipating workload, cost and resource calculations, integrating services on both sides...
Unless your company can spend a lot of money on new technology, re-engineering your environment and hiring a comprehensive cybersecurity team, you will most likely move to the cloud or seek external service partnerships. In his session at 18th Cloud Expo, Darren Guccione, CEO of Keeper Security, revealed what you need to know when it comes to encryption in the cloud.
"We're a cybersecurity firm that specializes in engineering security solutions both at the software and hardware level. Security cannot be an after-the-fact afterthought, which is what it's become," stated Richard Blech, Chief Executive Officer at Secure Channels, in this SYS-CON.tv interview at @ThingsExpo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
According to Forrester Research, every business will become either a digital predator or digital prey by 2020. To avoid demise, organizations must rapidly create new sources of value in their end-to-end customer experiences. True digital predators also must break down information and process silos and extend digital transformation initiatives to empower employees with the digital resources needed to win, serve, and retain customers.
"We are the public cloud providers. We are currently providing 50% of the resources they need for doing e-commerce business in China and we are hosting about 60% of mobile gaming in China," explained Yi Zheng, CPO and VP of Engineering at CDS Global Cloud, in this SYS-CON.tv interview at 19th Cloud Expo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
The WebRTC Summit New York, to be held June 6-8, 2017, at the Javits Center in New York City, NY, announces that its Call for Papers is now open. Topics include all aspects of improving IT delivery by eliminating waste through automated business models leveraging cloud technologies. WebRTC Summit is co-located with 20th International Cloud Expo and @ThingsExpo. WebRTC is the future of browser-to-browser communications, and continues to make inroads into the traditional, difficult, plug-in web co...
Between 2005 and 2020, data volumes will grow by a factor of 300 – enough data to stack CDs from the earth to the moon 162 times. This has come to be known as the ‘big data’ phenomenon. Unfortunately, traditional approaches to handling, storing and analyzing data aren’t adequate at this scale: they’re too costly, slow and physically cumbersome to keep up. Fortunately, in response a new breed of technology has emerged that is cheaper, faster and more scalable. Yet, in meeting these new needs they...
When it comes to cloud computing, the ability to turn massive amounts of compute cores on and off on demand sounds attractive to IT staff, who need to manage peaks and valleys in user activity. With cloud bursting, the majority of the data can stay on premises while tapping into compute from public cloud providers, reducing risk and minimizing need to move large files. In his session at 18th Cloud Expo, Scott Jeschonek, Director of Product Management at Avere Systems, discussed the IT and busin...
In his general session at 19th Cloud Expo, Manish Dixit, VP of Product and Engineering at Dice, discussed how Dice leverages data insights and tools to help both tech professionals and recruiters better understand how skills relate to each other and which skills are in high demand using interactive visualizations and salary indicator tools to maximize earning potential. Manish Dixit is VP of Product and Engineering at Dice. As the leader of the Product, Engineering and Data Sciences team at D...
The Internet of Things (IoT) promises to simplify and streamline our lives by automating routine tasks that distract us from our goals. This promise is based on the ubiquitous deployment of smart, connected devices that link everything from industrial control systems to automobiles to refrigerators. Unfortunately, comparatively few of the devices currently deployed have been developed with an eye toward security, and as the DDoS attacks of late October 2016 have demonstrated, this oversight can ...
What happens when the different parts of a vehicle become smarter than the vehicle itself? As we move toward the era of smart everything, hundreds of entities in a vehicle that communicate with each other, the vehicle and external systems create a need for identity orchestration so that all entities work as a conglomerate. Much like an orchestra without a conductor, without the ability to secure, control, and connect the link between a vehicle’s head unit, devices, and systems and to manage the ...
"Once customers get a year into their IoT deployments, they start to realize that they may have been shortsighted in the ways they built out their deployment and the key thing I see a lot of people looking at is - how can I take equipment data, pull it back in an IoT solution and show it in a dashboard," stated Dave McCarthy, Director of Products at Bsquare Corporation, in this SYS-CON.tv interview at @ThingsExpo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.