|By Marketwired .||
|July 21, 2014 02:47 AM EDT||
STOCKHOLM, SWEDEN -- (Marketwired) -- 07/21/14 -- Lundin Petroleum AB (Lundin Petroleum) (TSX: LUP)(OMX: LUPE), through its wholly owned subsidiary Lundin Norway AS (Lundin Norway), is pleased to announce that drilling of appraisal well 7120/1-4S in the western part of the Gohta discovery in PL492 has been successfully completed. The well was drilled 5.3 km northwest of the original Gohta discovery well.
The main objectives of well 7120/1-4 S, which was operated by Lundin Norway, were to confirm the extent and reservoir properties of the Permian carbonates and to establish the oil-water and gas-oil contacts in the western parts of the structure.
The well encountered 10 metres of Upper Permian limestone conglomerate with good reservoir properties overlying fractured limestones of limited reservoir quality. The conglomeratic interval contained gas condensate and the limestone contained traces of oil but appears to be tight. The depth interval of the oil traces in the appraisal well corresponds with the oil column in the 7120/1-3 discovery well.
Extensive data acquisition and sampling was carried out in the reservoir, including conventional coring and fluid sampling.
The pressure and fluid properties indicate communication between the reservoirs in the two wells on the Gohta structure.
Two production tests (DST) were performed in the well. An attempt was made to test a 50 metre interval starting 23 metres below the estimated gas-oil contact followed by a test of the 10 metre thick conglomerate interval. The oil zone test instantaneously produced gas at a rate of 6.4 million cubic feet per day (mmcfd). Pressure build-up data showed drainage from a porous reservoir as a result of insufficient isolation between the oil and gas zones on the outside of the production liner. The oil zone test was therefore not conclusive.
The test of the 10 metre thick gas condensate zone produced 26.4 mmcfd of gas and 880 barrels of condensate per day. The pressure build-up analysis showed the test draining an area with a radius of at least 1,000 metres out from the well. The results confirmed good production characteristics in the matrix of the limestone conglomerate.
Appraisal well 7120/1-4 S is the second well drilled in production license PL492 after it was assigned in 2008 (APA2007). It was drilled to a total depth of 2,490 metres below sea-level. The water depth was 331.5 metres.
The well was drilled by the drilling rig Island Innovator. It will be permanently plugged and abandoned before the rig proceeds to drill exploration well 7220/11-1 in production license PL609 where Lundin Norway is also operator.
The Gohta discovery well 7120/1-3 was completed in October 2013 and found a 25 metres gross gas column above a 75 metres gross oil column in karstified and dolomitized limestone. The well production tested approximately 4,300 bopd through a 44/64" choke and the preliminary evaluation of the gross recoverable oil and gas resources from the Gohta discovery well is estimated at between 111 and 232 million barrels oil equivalent.
Lundin Norway, is the operator and has a 40 percent working interest in PL492. The partners are Det norske oljeselskap ASA with a 40 percent working interest and Noreco Norway AS with a 20 percent working interest.
Lundin Petroleum is a Swedish independent oil and gas exploration and production company with a well balanced portfolio of world-class assets primarily located in Europe and South East Asia. The Company is listed at the NASDAQ OMX, Stockholm (ticker "LUPE") and at the Toronto Stock Exchange (TSX) (Ticker "LUP"). Lundin Petroleum has proven and probable reserves of 194 million barrels of oil equivalent (MMboe).
This information has been made public in accordance with the Securities Market Act (SFS 2007:528) and/or the Financial Instruments Trading Act (SFS 1991:980).
Certain statements made and information contained herein constitute "forward-looking information" (within the meaning of applicable securities legislation). Such statements and information (together, "forward-looking statements") relate to future events, including the Company's future performance, business prospects or opportunities. Forward-looking statements include, but are not limited to, statements with respect to estimates of reserves and/or resources, future production levels, future capital expenditures and their allocation to exploration and development activities, future drilling and other exploration and development activities. Ultimate recovery of reserves or resources are based on forecasts of future results, estimates of amounts not yet determinable and assumptions of management.
All statements other than statements of historical fact may be forward-looking statements. Statements concerning proven and probable reserves and resource estimates may also be deemed to constitute forward-looking statements and reflect conclusions that are based on certain assumptions that the reserves and resources can be economically exploited. Any statements that express or involve discussions with respect to predictions, expectations, beliefs, plans, projections, objectives, assumptions or future events or performance (often, but not always, using words or phrases such as "seek", "anticipate", "plan", "continue", "estimate", "expect", "may", "will", "project", "predict", "potential", "targeting", "intend", "could", "might", "should", "believe" and similar expressions) are not statements of historical fact and may be "forward-looking statements". Forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause actual results or events to differ materially from those anticipated in such forward-looking statements. No assurance can be given that these expectations and assumptions will prove to be correct and such forward-looking statements should not be relied upon. These statements speak only as on the date of the information and the Company does not intend, and does not assume any obligation, to update these forward-looking statements, except as required by applicable laws. These forward-looking statements involve risks and uncertainties relating to, among other things, operational risks (including exploration and development risks), productions costs, availability of drilling equipment, reliance on key personnel, reserve estimates, health, safety and environmental issues, legal risks and regulatory changes, competition, geopolitical risk, and financial risks. These risks and uncertainties are described in more detail under the heading "Risks and Risk Management" and elsewhere in the Company's annual report. Readers are cautioned that the foregoing list of risk factors should not be construed as exhaustive. Actual results may differ materially from those expressed or implied by such forward-looking statements. Forward-looking statements are expressly qualified by this cautionary statement.
Reserves and Resources
Unless otherwise stated, Lundin Petroleum's reserve and resource estimates are as at 31 December 2013, and have been prepared and audited in accordance with National Instrument 51-101 Standards of Disclosure for Oil and Gas Activities ("NI 51-101") and the Canadian Oil and Gas Evaluation Handbook ("COGE Handbook")."). Unless otherwise stated, all reserves estimates contained herein are the aggregate of "Proved Reserves" and "Probable Reserves", together also known as "2P Reserves". For further information on reserve and resource classifications, see "Reserves, Resources and Production" in the Company's annual report.
Contingent Resources are those quantities of petroleum estimated, as of a given date, to be potentially recoverable from known accumulations using established technology or technology under development, but are not currently considered to be commercially recoverable due to one or more contingencies. Contingencies may include factors such as economic, legal, environmental, political and regulatory matters or a lack of markets. There is no certainty that it will be commercially viable for the Company to produce any portion of the Contingent Resources. . Unless otherwise stated, all contingent resource estimates contained herein are the best estimate ("2C") contingent resources.
Prospective Resources are those quantities of petroleum estimated, as of a given date, to be potentially recoverable from undiscovered accumulations by application of future development projects. Prospective Resources have both a chance of discovery and a chance of development. There is no certainty that any portion of the Prospective Resources will be discovered. If discovered, there is no certainty that it will be commercially viable to produce any portion of the Prospective Resources. Unless otherwise stated, all Prospective Resource estimates contained herein are reflecting a P50 Prospective Resource estimate. Risked Prospective Resources reported herein are partially risked. They have been risked for chance of discovery, but have not been risked for chance of development.
BOEs may be misleading, particularly if used in isolation. A BOE conversion ratio of 6 Mcf : 1 Bbl is based on an energy equivalency conversion method primarily applicable at the burner tip and does not represent a value equivalency at the wellhead.
Increasing IoT connectivity is forcing enterprises to find elegant solutions to organize and visualize all incoming data from these connected devices with re-configurable dashboard widgets to effectively allow rapid decision-making for everything from immediate actions in tactical situations to strategic analysis and reporting. In his session at 18th Cloud Expo, Shikhir Singh, Senior Developer Relations Manager at Sencha, will discuss how to create HTML5 dashboards that interact with IoT devic...
May. 3, 2016 04:00 PM EDT Reads: 1,260
The increasing popularity of the Internet of Things necessitates that our physical and cognitive relationship with wearable technology will change rapidly in the near future. This advent means logging has become a thing of the past. Before, it was on us to track our own data, but now that data is automatically available. What does this mean for mHealth and the "connected" body? In her session at @ThingsExpo, Lisa Calkins, CEO and co-founder of Amadeus Consulting, will discuss the impact of wea...
May. 3, 2016 04:00 PM EDT Reads: 967
trust and privacy in their ecosystem. Assurance and protection of device identity, secure data encryption and authentication are the key security challenges organizations are trying to address when integrating IoT devices. This holds true for IoT applications in a wide range of industries, for example, healthcare, consumer devices, and manufacturing. In his session at @ThingsExpo, Lancen LaChance, vice president of product management, IoT solutions at GlobalSign, will teach IoT developers how t...
May. 3, 2016 03:58 PM EDT
There is an ever-growing explosion of new devices that are connected to the Internet using “cloud” solutions. This rapid growth is creating a massive new demand for efficient access to data. And it’s not just about connecting to that data anymore. This new demand is bringing new issues and challenges and it is important for companies to scale for the coming growth. And with that scaling comes the need for greater security, gathering and data analysis, storage, connectivity and, of course, the...
May. 3, 2016 03:45 PM EDT Reads: 1,048
We’ve worked with dozens of early adopters across numerous industries and will debunk common misperceptions, which starts with understanding that many of the connected products we’ll use over the next 5 years are already products, they’re just not yet connected. With an IoT product, time-in-market provides much more essential feedback than ever before. Innovation comes from what you do with the data that the connected product provides in order to enhance the customer experience and optimize busi...
May. 3, 2016 03:30 PM EDT Reads: 1,157
A critical component of any IoT project is the back-end systems that capture data from remote IoT devices and structure it in a way to answer useful questions. Traditional data warehouse and analytical systems are mature technologies that can be used to handle large data sets, but they are not well suited to many IoT-scale products and the need for real-time insights. At Fuze, we have developed a backend platform as part of our mobility-oriented cloud service that uses Big Data-based approache...
May. 3, 2016 03:23 PM EDT Reads: 115
Artificial Intelligence has the potential to massively disrupt IoT. In his session at 18th Cloud Expo, AJ Abdallat, CEO of Beyond AI, will discuss what the five main drivers are in Artificial Intelligence that could shape the future of the Internet of Things. AJ Abdallat is CEO of Beyond AI. He has over 20 years of management experience in the fields of artificial intelligence, sensors, instruments, devices and software for telecommunications, life sciences, environmental monitoring, process...
May. 3, 2016 03:15 PM EDT Reads: 1,138
The IETF draft standard for M2M certificates is a security solution specifically designed for the demanding needs of IoT/M2M applications. In his session at @ThingsExpo, Brian Romansky, VP of Strategic Technology at TrustPoint Innovation, will explain how M2M certificates can efficiently enable confidentiality, integrity, and authenticity on highly constrained devices.
May. 3, 2016 03:15 PM EDT Reads: 1,039
The IoTs will challenge the status quo of how IT and development organizations operate. Or will it? Certainly the fog layer of IoT requires special insights about data ontology, security and transactional integrity. But the developmental challenges are the same: People, Process and Platform. In his session at @ThingsExpo, Craig Sproule, CEO of Metavine, will demonstrate how to move beyond today's coding paradigm and share the must-have mindsets for removing complexity from the development proc...
May. 3, 2016 03:15 PM EDT Reads: 641
In his session at @ThingsExpo, Chris Klein, CEO and Co-founder of Rachio, will discuss next generation communities that are using IoT to create more sustainable, intelligent communities. One example is Sterling Ranch, a 10,000 home development that – with the help of Siemens – will integrate IoT technology into the community to provide residents with energy and water savings as well as intelligent security. Everything from stop lights to sprinkler systems to building infrastructures will run ef...
May. 3, 2016 03:15 PM EDT Reads: 1,136
SYS-CON Events announced today that Ericsson has been named “Gold Sponsor” of SYS-CON's @ThingsExpo, which will take place on June 7-9, 2016, at the Javits Center in New York, New York. Ericsson is a world leader in the rapidly changing environment of communications technology – providing equipment, software and services to enable transformation through mobility. Some 40 percent of global mobile traffic runs through networks we have supplied. More than 1 billion subscribers around the world re...
May. 3, 2016 02:45 PM EDT Reads: 1,235
In the world of DevOps there are ‘known good practices’ – aka ‘patterns’ – and ‘known bad practices’ – aka ‘anti-patterns.' Many of these patterns and anti-patterns have been developed from real world experience, especially by the early adopters of DevOps theory; but many are more feasible in theory than in practice, especially for more recent entrants to the DevOps scene. In this power panel at @DevOpsSummit at 18th Cloud Expo, moderated by DevOps Conference Chair Andi Mann, panelists will dis...
May. 3, 2016 02:45 PM EDT Reads: 796
Much of the value of DevOps comes from a (renewed) focus on measurement, sharing, and continuous feedback loops. In increasingly complex DevOps workflows and environments, and especially in larger, regulated, or more crystallized organizations, these core concepts become even more critical. In his session at @DevOpsSummit at 18th Cloud Expo, Andi Mann, Chief Technology Advocate at Splunk, will show how, by focusing on 'metrics that matter,' you can provide objective, transparent, and meaningfu...
May. 3, 2016 02:30 PM EDT Reads: 911
Digital payments using wearable devices such as smart watches, fitness trackers, and payment wristbands are an increasing area of focus for industry participants, and consumer acceptance from early trials and deployments has encouraged some of the biggest names in technology and banking to continue their push to drive growth in this nascent market. Wearable payment systems may utilize near field communication (NFC), radio frequency identification (RFID), or quick response (QR) codes and barcodes...
May. 3, 2016 02:30 PM EDT Reads: 928
Manufacturers are embracing the Industrial Internet the same way consumers are leveraging Fitbits – to improve overall health and wellness. Both can provide consistent measurement, visibility, and suggest performance improvements customized to help reach goals. Fitbit users can view real-time data and make adjustments to increase their activity. In his session at @ThingsExpo, Mark Bernardo Professional Services Leader, Americas, at GE Digital, will discuss how leveraging the Industrial Interne...
May. 3, 2016 02:00 PM EDT Reads: 1,176