|By Marketwired .||
|July 21, 2014 10:31 AM EDT||
SUDBURY, ONTARIO -- (Marketwired) -- 07/21/14 -- Ginguro Exploration Inc. (TSX VENTURE:GEG) (the "Company" or "GEG") is pleased to provide an update on exploration activities underway at the Company's Pardo JV property, located approximately 65 km northeast of Sudbury, Ontario.
Exploration on the Pardo JV is advancing very well. The program of prospecting, stripping, washing and channel sampling new areas has advanced beyond expectations, with promising new areas being uncovered weekly. Diamond drilling in support of the gold study is near completion. The large diameter hammer drill hole component of the gold study will start within days, and the radon gas survey, which was designed to identify buried gold mineralization and is discussed further below, is also near completion.
Sampling Progress and New Results
Assays have been returned from six separate channels cut across the stripped outcrop in the middle block of the Eastern Reef. A summary of length-weighted averages is as follows:
Table 1: Eastern Reef Middle Block Length-weighted average sample assays Au Channel # Length (m) (g/t) Total samples CH-14-04 18 1.1 36 CH-14-05 6.5 1.2 13 CH-14-06 2.5 0.4 5 CH-14-07 7 0.6 14 CH-14-08 7.5 4.6 15 CH-13-117 16 0.2 32
A new area of surface mineralization named the 1214/Trench 2 Connection area has been uncovered between the Eastern Reef and the previously uncovered Trench 2 area. Assays for five channels cut across the 1214/Trench 2 Connection area have been received. Six additional channels remain with assays pending. A summary of length weighted averages for the first 5 channels is as follows:
Table 2: 1214/Trench2 Connection Area Length-weighted average sample assays Au Channel # Length (m) (g/t) Total samples CH-14-01 28.5 0.3 57 CH-14-02 28.5 0.7 57 CH-14-03 14.5 0.4 29 CH-14-09 15 0.1 30 CH-14-010 20 2.2 40
Due to the near flat lying nature of the sedimentary strata, it is not always possible to cut samples across the gold-bearing strata. Samples are usually collected either parallel or perpendicular to the interpreted paleochannel direction. Therefore, the channel lengths reported in this release represent the gold distribution over the surface area sampled and do not represent true thicknesses of the mineralized unit. The gold-bearing conglomerate on the Eastern Reef has a true thickness of approximately 6 metres. The gold bearing conglomerate at the 1214/Trench 2 area is estimated to be 3 to 5 metres thick.
In addition to these areas, channel samples have been taken at the 007 South Extension and the Western Reef Extension. At the 007 South Extension, three short channels totaling 6.5 meters in length have been cut and assays are pending. This new area was initially tested with nine grab samples that retuned gold grades ranging from trace to 117 g/t and averaging 18.0 g/t.
At the Western Reef Extension located 2 km southwest of the Eastern Reef, 11 channels totaling 119 metres have been cut. All assays for these samples are pending. Initial grab samples from this new area yielded up to 3.9 g/t gold (see Company's press release dated June 23, 2014).
A map showing the location of the gold zones and sample locations is posted on the company's web site at www.ginguro.com.
Prospecting with the intention of locating new areas of surface gold mineralization is ongoing. Once an area is identified, it is opened up for thorough channel sampling. The Company will provide updates on this work as the results are returned over the coming weeks and months.
To date, 17 short diamond drill holes have been completed. Of these holes, 11 have been logged and 250 samples taken for assay. All of these assays are pending. The remaining 6 holes will be sampled in the coming days. Further diamond drilling in support of the ongoing gold study will be completed in the coming days.
The hammer drilling component of the gold study is presently starting. This drilling involves using a percussion rig to drill larger diameter holes and will take place mainly on the 007 Zone and the Eastern Reef. The gold study is being conducted under the direction of Mr. Jim Tilsley, a recognized expert in determining best sampling protocols for gold resource estimation. The results of this work will provide important parameters for planning future resource drilling.
Radon Gas Survey
A radon gas survey designed to identify areas of buried heavy mineral concentrates that include both gold and minor uranium minerals is near completion, final results will follow shortly thereafter. Preliminary results are encouraging, and show not only correlation with known gold zones but also new areas of anomalous radon gas concentration. These anomalies will be prioritized in due course for follow up as part of the current program.
Commenting on the ongoing work at the Pardo JV, President and CEO Richard Murphy stated, "The results to date represent important incremental expansions on the gold zones outlined previously. Pardo keeps getting bigger, better and more exciting. The guys in the field have the opportunity to make a major discovery every day they are there."
Ginguro currently holds a 64.5% ownership interest in the Pardo JV. Endurance Gold Corporation owns a 35.5% interest in the JV. Both Ginguro and Endurance are funding the current 2014 program on a pro rata basis. As such, it is anticipated that Ginguro's ownership percentage will remain unchanged following the end of the current program.
Ginguro Exploration Inc. is a mineral exploration company focused on the advancement of its Pardo paleo-placer gold property, located in Pardo Township in northern Ontario. To learn more about Ginguro Exploration Inc., please visit: www.ginguro.com.
The Qualified Person responsible for the geological technical content of this news release is Richard Murphy, P.Geo, President and CEO of Ginguro Exploration Inc.
Statements in this release that are forward-looking statements are subject to various risks and uncertainties concerning the specific factors disclosed under the heading "Risk Factors" in the Corporation's filings with Canadian securities regulators. Such information contained herein represents management's best judgment as of the date hereof based on information currently available. The Corporation does not assume any obligation to update any forward-looking statements, save and except as may be required by applicable securities laws.
The grab samples are transported in security sealed bags for preparation at AGAT Prep Lab located in Sudbury, Ontario. Prepped samples are shipped for analysis to the AGAT Assay Laboratory in Mississauga, Ontario. AGAT Laboratories Ltd. is an ISO 17025 registered laboratory. Samples are analyzed by industry standard 50 gram fire assay fusion with atomic absorption spectroscopy (AAS) finish, and a gravimetric finish on samples exceeding 10 g/t gold. The channel samples were assayed using a modified pulp metallic assay procedure. The entire sample was crushed and pulverized to 85% passing 100 mesh. The +100 mesh material was fluxed and assayed in its entirety, while two 50 g aliquots of the -100 mesh undersize pulp were cut out and fire assayed. Results were reported as a weighted average of gold in the three fractions. The Company inserts a certified reference standard or an analytical blank in every batch of 20 samples. Validation parameters are established in the database to ensure quality control.
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Fifty billion connected devices and still no winning protocols standards. HTTP, WebSockets, MQTT, and CoAP seem to be leading in the IoT protocol race at the moment but many more protocols are getting introduced on a regular basis. Each protocol has its pros and cons depending on the nature of the communications. Does there really need to be only one protocol to rule them all? Of course not. In his session at @ThingsExpo, Chris Matthieu, co-founder and CTO of Octoblu, walk you through how Oct...
Oct. 1, 2016 03:00 AM EDT Reads: 2,433
There is growing need for data-driven applications and the need for digital platforms to build these apps. In his session at 19th Cloud Expo, Muddu Sudhakar, VP and GM of Security & IoT at Splunk, will cover different PaaS solutions and Big Data platforms that are available to build applications. In addition, AI and machine learning are creating new requirements that developers need in the building of next-gen apps. The next-generation digital platforms have some of the past platform needs a...
Oct. 1, 2016 03:00 AM EDT Reads: 1,964
Smart Cities are here to stay, but for their promise to be delivered, the data they produce must not be put in new siloes. In his session at @ThingsExpo, Mathias Herberts, Co-founder and CTO of Cityzen Data, will deep dive into best practices that will ensure a successful smart city journey.
Oct. 1, 2016 02:30 AM EDT Reads: 2,714
Businesses are struggling to manage the information flow and interactions between all of these new devices and things jumping on their network, and the apps and IT systems they control. The data businesses gather is only helpful if they can do something with it. In his session at @ThingsExpo, Chris Witeck, Principal Technology Strategist at Citrix, will discuss how different the impact of IoT will be for large businesses, expanding how IoT will allow large organizations to make their legacy ap...
Oct. 1, 2016 02:30 AM EDT Reads: 648
Adobe is changing the world though digital experiences. Adobe helps customers develop and deliver high-impact experiences that differentiate brands, build loyalty, and drive revenue across every screen, including smartphones, computers, tablets and TVs. Adobe content solutions are used daily by millions of companies worldwide-from publishers and broadcasters, to enterprises, marketing agencies and household-name brands. Building on its established design leadership, Adobe enables customers not o...
Oct. 1, 2016 02:30 AM EDT Reads: 523
SYS-CON Events announced today that Tintri Inc., a leading producer of VM-aware storage (VAS) for virtualization and cloud environments, will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Tintri VM-aware storage is the simplest for virtualized applications and cloud. Organizations including GE, Toyota, United Healthcare, NASA and 6 of the Fortune 15 have said “No to LUNs.” With Tintri they mana...
Oct. 1, 2016 02:30 AM EDT Reads: 3,026
Just over a week ago I received a long and loud sustained applause for a presentation I delivered at this year’s Cloud Expo in Santa Clara. I was extremely pleased with the turnout and had some very good conversations with many of the attendees. Over the next few days I had many more meaningful conversations and was not only happy with the results but also learned a few new things. Here is everything I learned in those three days distilled into three short points.
Oct. 1, 2016 02:15 AM EDT Reads: 5,457
SYS-CON Events announced today that Numerex Corp, a leading provider of managed enterprise solutions enabling the Internet of Things (IoT), will exhibit at the 19th International Cloud Expo | @ThingsExpo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Numerex Corp. (NASDAQ:NMRX) is a leading provider of managed enterprise solutions enabling the Internet of Things (IoT). The Company's solutions produce new revenue streams or create operating...
Oct. 1, 2016 02:15 AM EDT Reads: 2,123
24Notion is full-service global creative digital marketing, technology and lifestyle agency that combines strategic ideas with customized tactical execution. With a broad understand of the art of traditional marketing, new media, communications and social influence, 24Notion uniquely understands how to connect your brand strategy with the right consumer. 24Notion ranked #12 on Corporate Social Responsibility - Book of List.
Oct. 1, 2016 02:15 AM EDT Reads: 516
Major trends and emerging technologies – from virtual reality and IoT, to Big Data and algorithms – are helping organizations innovate in the digital era. However, to create real business value, IT must think beyond the ‘what’ of digital transformation to the ‘how’ to harness emerging trends, innovation and disruption. Architecture is the key that underpins and ties all these efforts together. In the digital age, it’s important to invest in architecture, extend the enterprise footprint to the cl...
Oct. 1, 2016 02:15 AM EDT Reads: 757
Why do your mobile transformations need to happen today? Mobile is the strategy that enterprise transformation centers on to drive customer engagement. In his general session at @ThingsExpo, Roger Woods, Director, Mobile Product & Strategy – Adobe Marketing Cloud, covered key IoT and mobile trends that are forcing mobile transformation, key components of a solid mobile strategy and explored how brands are effectively driving mobile change throughout the enterprise.
Oct. 1, 2016 01:45 AM EDT Reads: 510
As ridesharing competitors and enhanced services increase, notable changes are occurring in the transportation model. Despite the cost-effective means and flexibility of ridesharing, both drivers and users will need to be aware of the connected environment and how it will impact the ridesharing experience. In his session at @ThingsExpo, Timothy Evavold, Executive Director Automotive at Covisint, will discuss key challenges and solutions to powering a ride sharing and/or multimodal model in the a...
Oct. 1, 2016 01:15 AM EDT Reads: 721
In his general session at 18th Cloud Expo, Lee Atchison, Principal Cloud Architect and Advocate at New Relic, discussed cloud as a ‘better data center’ and how it adds new capacity (faster) and improves application availability (redundancy). The cloud is a ‘Dynamic Tool for Dynamic Apps’ and resource allocation is an integral part of your application architecture, so use only the resources you need and allocate /de-allocate resources on the fly.
Oct. 1, 2016 01:15 AM EDT Reads: 3,045
DevOps and microservices are permeating software engineering teams broadly, whether these teams are in pure software shops but happen to run a business, such Uber and Airbnb, or in companies that rely heavily on software to run more traditional business, such as financial firms or high-end manufacturers. Microservices and DevOps have created software development and therefore business speed and agility benefits, but they have also created problems; specifically, they have created software sec...
Oct. 1, 2016 12:15 AM EDT Reads: 1,428
In this strange new world where more and more power is drawn from business technology, companies are effectively straddling two paths on the road to innovation and transformation into digital enterprises. The first path is the heritage trail – with “legacy” technology forming the background. Here, extant technologies are transformed by core IT teams to provide more API-driven approaches. Legacy systems can restrict companies that are transitioning into digital enterprises. To truly become a lea...
Sep. 30, 2016 11:30 PM EDT Reads: 774